Minor Change Existing Approval - MCU22 0154 02 (As Published)

                      Approved Plans
               2.     Development authorised by this approval must be undertaken generally in accordance with
                      the Approved Plans listed in the tables below. The plans must be amended to incorporate
                      the amendments listed within the table below and resubmitted to Council prior to the issue
                      of any Development Permit for Operational Works.

                        Plan No.              Rev.    Plan/Document Name                            Date

                        23011-DD 10.01        H       Floor Plans prepared by KP Architects Pty 20.03.2024
                                                      Ltd

                        23011-DD 10.02        H       Floor Plans prepared by KP Architects Pty 20.03.2024
                                                      Ltd

                        23011-DD 30.01        E       Sections prepared by KP Architects Pty Ltd    18.03.2024

                      The following plans require amendment.

                        Plan No.              Rev.    Plan/Document Name                            Date

                        23011-DD 20.01        F       Elevations prepared by KP Architects Pty 20.03.2024
                                                      Ltd

                        Amendments            •      The windows to the western upper level must extend for the
                                                     full width of the site’s frontage to David Low Way/Grebe
                                                     Service Road.
                                              •      Architectural treatments such as louvre screens must be
                                                     incorporated to the western upper-level windows.
                                              •      The lower and upper awnings must be finished with timber
                                                     cladding or timber look cladding.
                                              •      The building façades, where not glazed, must be provided
                                                     with variation in material through a reduction in masonry and
                                                     the inclusion of timber cladding or timber look cladding.
                      *(Refer to Advisory Note)
                      Building Appearance
               3.     Ground floor shopfront glazing along all frontages must be fully transparent to a minimum of
                      65% of the street frontage to allow passive surveillance and encourage social interaction and
                      must be provided at full height (floor to ceiling).
               4.     Any security screens on the premises must consist of grille or translucent screens and not
                      solid shutters, screens or roller-doors.
               5.     All mechanical equipment and other service infrastructure located on the site must be:
                      a.      located not less than 2 metres from a property boundary.
                      b.      fully enclosed or screened such that they are not visible from the street frontages nor
                              adjoining properties. Roof materials must be non-reflective and designed with colours
                              and styles to minimise the visual impact of the development.
                      Weather Protection
               6.     Street awnings must be provided along the full length of the western, eastern and southern
                      frontages as shown on the approved plans. The awnings must have a minimum width of 2.4
                      metres from the building line or the same unless otherwise approved and must be designed
                      to provide continuous solar and rain protection and promote all weather activity.




                                                                                                        Page 2 of 8
Document Set ID: 24987071
Version: 3, Version Date: 20/07/2026