Council archive · source document
21.101_16_31 Saltwater Ave Jetty · 132002.220261.1
Long View ASSOCIATED CONSULTANTS
L Consulting Engineers
Lodestar Meridian Pty Ltd T/as Long View Consulting Engineers
V Post: PO Box 963 Cooroy QLD 4563
ABN: 87 711 552 832
Mobile: 0414 681 676
Email: [email protected]
Internet: www.longviewconsulting.com.au
PROJECT
EXISTING JETTY REPLACEMENT
31 SALTWATER AVENUE, NOOSAVILLE, 4566, QLD
LongView PROJECT No.: CLIENT
21.101-016 NOOSA JETTY SERVICES
PROJECT SITE
DRAWING SCHEDULE & TRANSMITTAL 31 SALTWATER AVENUE,
NOOSAVILLE, 4566, QLD.
REV. REV. REV.
DRAWING No. TITLE DATE: 18/05/26 19/05/26 12/06/26
S01 COVER SHEET (DRAWING SCHEDULE & TRANSMITTAL) C1 C2 C3
S02 STRUCTURAL NOTES SHEET C1 C2 C3
S03 SITE PLAN, FRAMING PLAN, ELEVATIONS C1 C2 C3
S04 JETTY FRAMING DETAILS SHEET 1 C1 C2 C3
S05 JETTY FRAMING DETAILS SHEET 2 - - C3
LOCALITY PLAN
NOT TO SCALE
ISSUE "P1" DENOTES PRELIMINARY ISSUE 1
ISSUE "A", "B" DENOTES APPROVAL / TENDER ISSUE
ISSUE "C1" DENOTES CONSTRUCTION ISSUE 1
CONSTRUCTION
© THIS DRAWING IS PROTECTED ASSOCIATED CONSULTANTS PROJECT DRAWING TITLE
UNDER COPYRIGHT IN
ACCORDANCE WITH
AGREEMENT BETWEEN
LODESTAR MERIDIAN PTY LTD
NOOSA JETTY SERVICES
Email: [email protected]
Phone: 0408 137 526
Long View EXISTING JETTY REPLACEMENT
31 SALTWATER AVENUE, NOOSAVILLE, 4566, QLD
DRAWING SCHEDULE & TRANSMITTAL
T/AS LONG VIEW CONSULTING
L Consulting Engineers
REVISIONS
ENGINEERS AND THE CLIENT AS
NAMED HEREIN. EXCLUSIVE
1 CONSTRUCTION ISSUE C3 F.M.
Lodestar Meridian Pty Ltd T/as Long View Consulting Engineers DRAWN CHECKED APPROVED DATE SCALE BAR DRAWING SCALES DRAWING SIZE
USE IS GRANTED UNDER THE
AGREEMENT ONLY FOR THE 1 CONSTRUCTION ISSUE C2 F.M. V Post: PO Box 963 Cooroy QLD 4563
N.N. N.N. 21/07/2026 1:1 A1 ORIGINAL
ABN: 87 711 552 832
PROJECT. THIS DRAWING SHALL
NOT BE CONSTRUCTED UNLESS 1 CONSTRUCTION ISSUE C1 F.M. Mobile: 0414 681 676
DESIGNED CHECKED RPEQ / Cert. PROJECT NUMBER DRAWING NUMBER REVISION
Email: [email protected]
21.101-016 S01 C3
DESCRIBED AS "CONSTRUCTION
ISSUE". No. DESCRIPTION REV. APP. Internet: www.longviewconsulting.com.au F.M. F.M. 19951
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of the other 5 pages
Page 2
GENERAL DIMENSIONS/LEVELS TIMBER FRAMING & BRACING: ABBREVIATIONS:
G1 STRUCTURAL DRAWINGS SHALL BE READ IN CONJUNCTION WITH THE L1. CONSTRUCTION SHALL BE SET OUT USING SURVEY BENCHMARKS PROVIDED BY COUNCIL. T1 ALL WORKMANSHIP AND MATERIALS SHALL BE IN ACCORDANCE WITH AS 1720, AS 1684 A.C.F. - ALL CORES FILLED
SPECIFICATION, ARCHITECTURAL, AND OTHER CONSULTANTS' DOCUMENTS. AND THE REFERENCED STANDARDS THEREIN. BTM. - BOTTOM
L2. ALL LEVELS AND SETOUT POINTS ARE SHALL BE CONFIRMED ON SITE BY REGISTERED B.W. - BOTH WAYS
G2 REFER TO THE ARCHITECTURAL DRAWINGS FOR SETOUT. NO DIMENSIONS SHALL BE SURVEYOR PRIOR TO CONSTRUCTION. ADVISE ANY DISCREPANCY BEFORE PROCEEDING. T2 ALL FRAMING, BRACING AND TIE-DOWN INFORMATION FORMS THE BASIS OF THE CB - CONSTRUCTION BREAK
OBTAINED BY SCALING FROM DRAWINGS. STRUCTURES STABILITY DOWN TO FOUNDATIONS. ALTERNATIVE METHODS SHALL C.O.S. - CONFIRM ON SITE
L3. DIMENSION STANDARDS: ONLY BE ACCEPTED ON APPROVAL OF THE ENGINEER. D&C - DESIGN & CONSTRUCT
G3 UNLESS OTHERWISE NOTED (UNO), ALL LEVELS ARE IN METRES AND ALL DIMENSIONS ARE IN - REDUCED LEVELS, CHAINAGES AND COORDINATES ARE ALL IN METRES.
DWG - DRAWING
MILLIMETRES. - CIVIL DRAWINGS (SKC SERIES): ALL OTHER DIMENSIONS ARE IN METRES (m). T3 PREFABRICATED TIMBER ROOF TRUSSES, PROPRIETARY FLOOR JOIST SYSTEMS
E.F. - EACH FACE
- STRUCTURAL DRAWINGS (SKS SERIES): ALL OTHER DIMENSIONS ARE IN MILLIMETRES (mm). AND ALTERNATIVE TIMBER ELEMENTS TO THOSE SHOWN ON THE ENGINEERING
H.D.G. - HOT DIP GALVANISED
G4 THE CONTRACTOR SHALL BE RESPONSIBLE FOR MAINTAINING THE STABILITY OF THE DRAWINGS ARE TO BE DESIGNED AND CERTIFIED BY THE SUPPLIER'S STRUCTURAL
STRUCTURE UNTIL ITS COMPLETION AND SHALL ENSURE THAT NO PART OF THE STRUCTURE L4. ALL LEVELS ARE TO AUSTRALIAN HEIGHT DATUM. ENGINEER. DESIGN AND INSPECTION CERTIFICATES FOR THESE ELEMENTS ARE TO BE Lg. - LONG
IS OVER-STRESSED BY EXCESSIVE LOADING. ISSUED TO THE CONTRACTOR FOR LODGEMENT WITH THE LOCAL AUTHORITY. L.V. - LENGTH VARIES
L5. DIMENSIONS SHALL NOT BE SCALED FROM DRAWINGS. N.S.O.P. - NOT SHOWN ON PLAN
G5 ALL MATERIALS AND WORKMANSHIP SHALL BE IN ACCORDANCE WITH THE CURRENT VERSION T4 ALL TIMBER MEMBERS USED ARE TO HAVE A MINIMUM LEVEL OF DURABILITY AS SS - STAINLESS STEEL
OF THE APPLICABLE STANDARD EXCEPT WHERE VARIED BY THE SPECIFICATION AND/OR L6. DESIGN USES DIGITAL TERRAIN MODEL GENERATED FROM THE SITE SURVEY. SOME SPECIFIED IN AS1684.2 - APPENDIX B. TYP. - TYPICAL
DRAWINGS. APPLICABLE CODES OF PRACTICE INCLUDE BUT ARE NOT LIMITED TO THE ELEMENTS ARE INTERPOLATED AND MAY VARY FROM THE ACTUAL SITE CONDITIONS U.N.O. - UNLESS NOTED OTHERWISE
FOLLOWING: T5 ALL HWD TIMBER SHALL BE SEASONED UNO. V - VARIES
AS 1163 STRUCTURAL STEEL HOLLOW SECTIONS
AS 1170 SAA LOADING CODE T6 ALL TIMBER SHALL BE FREE OF GUM VEINS, KNOTS, SHAKES, CHECKS, WANES AND ANY
AS 1554 WELDING OF STEEL STRUCTURES CONSTRUCTABILITY CONSTRAINTS: OTHER IMPERFECTIONS WITHIN CONNECTION ZONES.
AS 1664 ALUMINIUM STRUCTURES
AS 1684 RESIDENTIAL TIMBER-FRAMED CONSTRUCTION CC1. CONSTRUCTABILITY CONSTRAINTS: T7 ALL TIMBER FRAMING TO BE MINIMUM H5 TREATED UNO.
AS 1720 TIMBER STRUCTURES
AS 2159 PILING CODE A) PROTECT ALL EXISTING INFRASTRUCTURE (EG REVETMENT WALLS, PAVEMENTS, T8 EXPOSED FRAMING (TIMBER FRAMING THAT MAY BE SUBJECT TO PERIODIC WETTING):
AS 4100 STEEL STRUCTURES FENCING & ELECTRICAL POLES/WIRES) FROM ANY DAMAGE. - SHALL BE EITHER H6 PRESSURE TREATED OR DURABILITY CLASS 1
AS 4997 GUIDELINES FOR THE DESIGN OF MARITIME STRUCTURES SPECIES (MINIMUM) SAWN TIMBER (UNO)
AS 5100 BRIDGE DESIGN B) ALLOW OF LIKELIHOOD OF FLOW WITHIN THE WATERWAY: EXISTING WATERWAY ARE
BCA BUILDING CODE OF AUSTRALIA (NATIONAL CONSTRUCTION CODE) FLOODED MULTIPLE TIMES PER YEAR. PROTECT CONSTRUCTION EQUIPMENT AND T9 WASHERS SHALL BE PROVIDED UNDER ALL NUTS AND BOLT HEADS (EXCEPT CUP-HEAD
WORKS. BOLTS) BEARING AGAINST TIMBER AS FOLLOWS:
G6 ANY DISCREPANCY SHALL BE REFERRED TO THE SUPERINTENDENT FOR A DECISION BEFORE BOLT SIZE WASHER
PROCEEDING WITH THE WORK. CC2. NO WORK TO COMMENCE ON SITE UNTIL: <=M12 50X50X3.0mm
M16 57X57X4.0mm
- OFFICIAL PRE-START MEETING HELD AND PRE-START MEETING MINUTES ISSUED
G7 ALL PROPRIETARY PRODUCTS NOT DEEMED TO COMPLY WITH THE BCA SHALL HAVE M20 65X65X5.0.mm
- CONTRACTOR'S MANAGEMENT PLANS SUBMITTED (SITE, TRAFFIC, ENVIRONMENT,
THIRD-PARTY CERTIFICATION WITH RELEVANT TESTING AND SIGN-OFF BY AN RPEQ ENGINEER. >M20 75X75X6.0mm
SAFETY) FOR SUPERINTENDENT'S REVIEW.
PROPRIETARY PRODUCTS INCLUDES PREFABRICATED TRUSSES, LIGHT-GAUGE STEEL
FRAMING, FLOORING PRODUCTS, RECYCLED TIMBER AND PLASTICS, BALUSTRADES, SCREENS, T10 X….. INDICATES M12DIA ANCHOR ROD/BOLT
SHADE FABRICS, JOINERY, PARTITIONS AND OPERABLE WALLS.
T11 [X]….. INDICATES M16DIA ANCHOR ROD/BOLT
G8 REFER TO ARCHITECTS DRAWINGS FOR DETAILS OF ALL GROOVES, FILLETS, HOBS, DRIP
DRIVEN PILES:
GROOVES AND THE LIKE. T12 SB…. INDICATES STRAP BRACE ROOF BRACING FIXED TO TOP OF EACH JOIST WITH 2
P1. PILES SHALL BE CONSTRUCTED IN ACCORDANCE WITH AS2159. SCREWS. BEND STRAP BRACING OVER AT ENDS, FIX WITH 2 SCREWS TO TOP OF JOIST
G9 GIVE AT LEAST 24 HOURS NOTICE OF AN INSPECTION BEING REQUIRED FOR : AND 4 SCREWS TO SIDE FACE OF SUPPORTING MEMBER. ALL ROOFS TO BE BRACED.
P2. CONSTRUCTION CONSTRAINTS: AVOID LOADING EXISTING REVETMENT WALLS.
- PILING
- JETTY FRAMING (TIMBER) T13 ALL FASTENERS ARE TO BE GRADE A4-70 STAINLESS STEEL IN ACCORDANCE WITH
P3. DESIGN LOADS: PILES TO ACHIEVE GEOTECHNICAL CAPACITIES (VERTICAL & ISO-3506-1. EXTERNAL ANCHORS WHERE SUBJECT TO SALT AIR SHALL BE STAINLESS
- BRACING AND TIE DOWN
HORIZONTAL) SHOWN ON THE DRAWINGS WHERE PROVIDED. STEEL A4-70:
G10 ALL FABRICATION SHOP DRAWINGS SHALL BE PROVIDED TO THE ENGINEER FOR REVIEW AND -SCREWS TO BE NO.14 TYPE 17 WITH 50MM EMBEDMENT (UNO)
P4. REQUIRED PILE POSITION TOLERANCES: -ALL JOIST HANGERS, FRAMING ANCHORS, TRIPLE GRIPS AND THE LIKE, SHALL BE
COMMENT IN A3 HARDCOPY OR PDF FORMAT.
STAINLESS STEEL. TO BE MANUFACTURED BY PRYDA OR APPROVED
PLAN POSITION: +/- 50mm AT UNDERSIDE OF EACH GROUND BEAM. EQUIVALENT, WITH 5 NO. 2.8mm DIA X 30MM
G11 ABBREVIATIONS (GENERAL):
PILE VERTICALITY: NAILS EACH LEG MINIMUM. INSTALL AS PER MANUFACTURERS SPECIFICATION.
NTS NOT TO SCALE
- WITHIN 4% FOR ALL PILES
UNO UNLESS NOTED OTHERWISE
NSOE NOT SHOWN ON ELEVATION T14 PROVIDE BLOCKING OVER SUPPORTS AT 1800 MAX CRS IN ACCORDANCE WITH AS 1684
P5. DO NOT FOUND PILES HIGHER THAN TOE LEVELS ON DRAWINGS, UNLESS APPROVED FOR TIMBER BEARERS AND JOISTS WITH D/B >= 4.
NSOP NOT SHOWN ON PLAN
BY BOTH THE SUPERINTENDENT AND THE ENGINEER. THE SUPERINTENDENT SHALL
TYP TYPICAL
SEEK ADVICE FROM THE ENGINEER AS REQUIRED. T15 FOR JOISTS WITH SPAN >3000 AND BOTTOM OF JOIST UNRESTRAINED BY CEILING
(O) OVER
(U) UNDER DIAPHRAGM:
CRS CENTRES -PROVIDE 1 ROW OF BLOCKING BETWEEN EACH JOIST AT
NOM NOMINAL MIDSPAN FOR SPANS < 4200mm
CFW CONTINUOUS FILLET WELD ALUMINIUM: -PROVIDE 2 ROWS OF BLOCKING BETWEEN EACH JOIST AT
THIRD POINTS FOR SPANS >4200mm
A1. ALL WORKMANSHIP AND MATERIALS SHALL COMPLY WITH BEST PRACTISE ALUMINIUM
FABRICATION AND THE CURRENT AUSTRALIAN STANDARD AS 1664. T16 FIXING LOCATIONS TO BE FIXED ACCORDING TO THE FOLLOWING MINIMUM PACINGS
DESIGN CRITERIA A2. ALUMINIUM SECTIONS SHALL COMPLY WITH AS 1734, AS 1886 OR AS 1867. (D = FIXING SHANK DIA. IN mm):
A3. ALL WELDING SHALL COMPLY WITH AS 1665. BOLTS 4D EDGE DISTANCE TO BOTH EDGES IN DIRECTION OF SHEAR LOAD
DC1 THE STRUCTURAL ELEMENTS HAVE BEEN DESIGNED FOR THE FOLLOWING LIVE LOADS A4. ALL WELDING SHALL BE CARRIED OUT USING ARGONGAS SHIELDING. WELD 5D PITCH BETWEEN BOLTS
IN ACCORDANCE WITH AS 1170.1: LIVE LOAD REDUCTIONS ARE NOT APPLICABLE. CONSUMABLES SHALL BE COMPATIBLE WITH BOTH PARENT ALLOYS IN ACCORDANCE 5D EDGE DISTANCE FROM END OF ELEMENT
ELEMENT UDL CONCENTRATED WITH AS AS 1665. FOR 6063-T6 USE 4043 FILLER WIRE. PLATE-TO-EXTRUSION ALLOYS 13D MINIMUM OVERALL ELEMENT DEPTH
DECK 2.0kPa 2.7KN SHALL BE WELDED USING APPROPRIATE FILLERS IN ACCORDANCE WITH WTIA
TECHNICAL NOTES WHERE NOT COVERED BY AS 1665.
DC2 WIND LOADS HAVE BEEN DETERMINED IN ACCORDANCE WITH AS 1170.2 BASED ON: MINIMUM SPACING, EDGE & END DISTANCES FOR NAILS AND SCREWS
A5. ALL WELDS SHALL BE A MINIMUM 5mm CONTINUOUS FILLET WELD ALL ROUND,
IMPORTANCE LEVEL 2 UNLESS NOTED OTHERWISE.
REGION B MINIMUM DISTANCE
A6. ALUMINIUM EXTRUSIONS SHALL BE STRUCTURAL GRADE ALLOY:- EXTRUSIONS 6063-T6
ULTIMATE WIND SPEED 51 m/s UNLESS NOTED OTHERWISE.
SERVICEABILITY WIND SPEED 39.0 m/s SPACING TYPE HOLES FOR HOLES FOR
A7. ALUMINIUM PLATE IS TO BE WROUGHT GRADE ALLOY 5083 H116.
TERRAIN CATEGORY 2.5 NAILS NOT NAILS PREBORED SCREWS
A8. ALL STEEL AND STAINLESS STEEL BOLTS AND ALL OTHER FIXINGS MUST BE ISOLATED
PREBORED TO 80% DIA.
FROM ALUMINIUM USING NYLON OR SIMILAR APPROVED PACKERS/GASKETS, AND
DC3 EARTHQUAKE LOADING HAS BEEN DETERMINED IN ACCORDANCE WITH AS 1170.4 BASED END DISTANCE 20D 10D 10D
WASHERS WITH SHANK COLLARS.
ON: EDGE DISTANCE 5D 5D 5D
A9. SHOP DETAIL DRAWINGS ARE TO BE SUBMITTED TO THE ARCHITECT AND ENGINEER
ACCELERATION COEFFICIENT 0.06 ALONG-GRAIN SPACING 20D 10D 10D
FOR REVIEW. APPROVAL IS TO BE OBTAINED FROM THE COUNCIL, THE ARCHITECT AND
SITE FACTOR 1 CROSS-GRAIN SPACING 10D 3D 3D
THE ENGINEER, PROIR TO COMMENCING FABRICATION.
IMPORTANCE LEVEL 1
STRUCTURE TYPE
DESIGN CATEGORY EDC1
TEMPORARY WORKS:
DC4 FIRE RESISTANCE LEVELS OF STRUCTURAL ELEMENTS HAVE BEEN TAKEN AS FOLLOWS:
ELEMENT FRL (mins)
COLUMNS -/-/- T1. MAINTAIN THE WORKS IN A SAFE CONDITION. ENSURE STRUCTURES ARE NOT
BEAMS -/-/- OVER-STRESSED AT ANY TIME. TEMPORARY ROAD SURFACES SHALL BE TRAFFICABLE
WALLS -/-/- AT ALL TIMES. POTHOLES ETC SHALL BE MONITORED AND REPAIRED.
DC5 DETERMINATION OF DESIGN LOADING FOR NON-STRUCTURAL ELEMENTS SUCH AS
CEILING AND CLADDING SYSTEMS SHALL BE THE RESPONSIBILITY OF THE CONTRACTOR T2. CONTRACTOR'S RPEQ TO CERTIFY DESIGN AND CONSTRUCTION FOR TEMPORARY
WORKS: STRUTS, PROPPING, FORMWORK STRIPPING AND PROPPING PROCEDURES, TIE
DC6 FLOOD LOADING HAS BEEN DETERMINED IN ACCORDANCE WITH AS 5100 WITH NOMINAL BACKS, EXCAVATION SHORING, PROTECTION WORKS, DE-WATERING SYSTEMS,
FLOOD VELOCITY TO BE CONFIRMED BY HYDRAULIC REQUIREMENTS AS FOLLOWS: FORMWORK, EARLY LOADING OF STRUCTURES AND THE LIKE.
-V100 = 1m/s.
DC7 DESIGN LIFE IN ACCORDANCE WITH AS 4997 FOR THE APPLICABLE FACILITY CATEGORY:
2 SMALL CRAFT FACILITY - 25 YEARS.
CONSTRUCTION
© THIS DRAWING IS PROTECTED ASSOCIATED CONSULTANTS PROJECT DRAWING TITLE
UNDER COPYRIGHT IN
ACCORDANCE WITH
AGREEMENT BETWEEN
LODESTAR MERIDIAN PTY LTD
NOOSA JETTY SERVICES
Email: [email protected]
Phone: 0408 137 526
Long View EXISTING JETTY REPLACEMENT
31 SALTWATER AVENUE, NOOSAVILLE, 4566, QLD
STRUCTURAL NOTES SHEET
T/AS LONG VIEW CONSULTING
L Consulting Engineers
REVISIONS
ENGINEERS AND THE CLIENT AS
NAMED HEREIN. EXCLUSIVE
1 CONSTRUCTION ISSUE C3 F.M.
Lodestar Meridian Pty Ltd T/as Long View Consulting Engineers DRAWN CHECKED APPROVED DATE SCALE BAR DRAWING SCALES DRAWING SIZE
USE IS GRANTED UNDER THE
AGREEMENT ONLY FOR THE 1 CONSTRUCTION ISSUE C2 F.M. V Post: PO Box 963 Cooroy QLD 4563
N.N. N.N. 21/07/2026 1:1 A1 ORIGINAL
ABN: 87 711 552 832
PROJECT. THIS DRAWING SHALL
NOT BE CONSTRUCTED UNLESS 1 CONSTRUCTION ISSUE C1 F.M. Mobile: 0414 681 676
DESIGNED CHECKED RPEQ / Cert. PROJECT NUMBER DRAWING NUMBER REVISION
Email: [email protected]
21.101-016 S02 C3
DESCRIBED AS "CONSTRUCTION
ISSUE". No. DESCRIPTION REV. APP. Internet: www.longviewconsulting.com.au F.M. F.M. 19951
Page 3
SALTWATER AVENUE NOTES:
1. UNLESS NOTED OTHERWISE, ALL TIMBER SHALL BE DURABILITY
LOT: 331 CLASS 1 OF APPROVED SPECIES AND HAVE STRESS GRADE OF F14.
RP: 883849
AREA: 831 m² 2. UNLESS NOTED OTHERWISE, ALL CONSTRUCTION SHALL COMPLY WITH
THE ENVIRONMENTAL PROTECTION AGENCY'S OPERATIONAL POLICY
DO NOT FIX JETTY "BUILDING AND ENGINEERING STANDARDS FOR TIDAL WORKS".
TO EXISTING
REVETMENT WALL 3. ALL STAINLESS STEEL BOLTS, SCREWS, RODS, ETC. SHALL BE APPROVED
EXISTING 1500 MARINE GRADE 316.
REVETMENT
ALL OTHER STEEL WORK, INCLUDING NUTS, BOLTS, WASHERS,
WALL 150 AND SCREWS SHALL BE HOT DIP GALVANIZED OR STAINLESS STEEL.
4. TOP OF PILES SHALL BE SEALED AND FULLY CAP FLASHED OR RINGED WITH
1300
6.231 AN ALUMINIUM ALLOY OR STAINLESS STEEL BAND.
199°07'30" B1
P1
P1
KAYAK HANDRAIL TO DETAIL. 5. DIMENSIONS AND LEVELS SHALL NOT BE SCALED FROM THESE DRAWINGS.
2350
STEP TO RIGID HANDRAIL TO
1500 6. ALL LEVELS SHOWN ARE APPROXIMATE ONLY.
DJ1
8.03 DETAIL. COMPLY WITH NOOSA
O/A 21°0 7
7000
ALL LEVELS SHALL BE CONFIRMED ON SITE BY THE BUILDER PRIOR TO
PROJECTED
BOUNDARY
2'30
"
COUNCIL REGULATIONS.
.
CONSTRUCTION WORKS.
EQ
P1
2/ B1
P1
32x140 7. TIDAL LEVELS REFERENCE MARITIME SAFETY QLD. PUBLISHED TIDE DATA.
TJ
MERBAU FLOOD LEVEL RECORD FROM BOM DATA.
.
EQ
P1
3200
O/A
DECKING.
DJ1
3000 DJ2 8. C.O.S. DENOTES CONFIRM ON SITE.
7000
P1
P1
B2(u)
150
320 150
4600
4600 JETTY LOADING CRITERIA:
JETTY LIVE LOADS: = 2.0 kPa
NOOSA WATERS MOORED VESSEL (MAX.)
LENGTH: = 5.0m
WEIGHT: = 1500 Kg.
N
JETTY SITE PLAN JETTY FRAMING PLAN BERTHING VELOCITY: = 0.5m / Sec.
1:100 1:100
FRAMING SCHEDULE:
PIERS:
P1 - 150Ø HWD PIER, H5 (MIN.) JACKETED WITH 225Ø PVC
SLEEVE TO MIN. 300mm SEABED EMBEDMENT.
BEAMS:
B1 - 150 x 75 F14 HWD BEARER, H4 TREATED.
B2 - 2/200 x 75 F14 HWD BEARER, H4 TREATED.
(S.S. COACH-SCREW LAMINATED PER AS1684)
TJ - 150 x 75 F14 HWD TRIMMER BEAM, H4 TREATED.
JOISTS:
DJ1 - 150 x 75 F14 HWD JOISTS AT 700 MAX. CRS, H4 TREATED.
DJ2 - 150 x 75 F14 HWD JOISTS AT 500 MAX. CRS, H4 TREATED.
HANDRAIL TO DETAIL. 3200
RIGID HANDRAIL TO
COMPLY WITH NOOSA
COUNCIL REGULATIONS. TOP OF WALL TOP OF WALL
RL 1.0m AHD RL 1.0m AHD
DECK
DECK RL 1.0m AHD
RL 1.00m
RL 0.44m AHD
P1
P1
P1
P1
P1
P1
P1
P1
EXISTING
SEABED REVETMENT WALL
SEABED
2500
STONE PITCHING
2500
2500
3000
3000
3000
JETTY SIDE ELEVATION JETTY RIVER ELEVATION
1:50 1:50
CONSTRUCTION
© THIS DRAWING IS PROTECTED ASSOCIATED CONSULTANTS PROJECT DRAWING TITLE
UNDER COPYRIGHT IN
ACCORDANCE WITH
AGREEMENT BETWEEN
LODESTAR MERIDIAN PTY LTD
NOOSA JETTY SERVICES
Email: [email protected]
Phone: 0408 137 526
Long View EXISTING JETTY REPLACEMENT
31 SALTWATER AVENUE, NOOSAVILLE, 4566, QLD
SITE PLAN, FRAMING PLAN, ELEVATIONS
T/AS LONG VIEW CONSULTING
L Consulting Engineers
REVISIONS
ENGINEERS AND THE CLIENT AS
NAMED HEREIN. EXCLUSIVE
1 CONSTRUCTION ISSUE C3 F.M.
Lodestar Meridian Pty Ltd T/as Long View Consulting Engineers DRAWN CHECKED APPROVED DATE SCALE BAR DRAWING SCALES DRAWING SIZE
USE IS GRANTED UNDER THE
AGREEMENT ONLY FOR THE 1 CONSTRUCTION ISSUE C2 F.M. V Post: PO Box 963 Cooroy QLD 4563
N.N. N.N. 21/07/2026 1:100, 1:50 A1 ORIGINAL
ABN: 87 711 552 832
PROJECT. THIS DRAWING SHALL
NOT BE CONSTRUCTED UNLESS 1 CONSTRUCTION ISSUE C1 F.M. Mobile: 0414 681 676
DESIGNED CHECKED RPEQ / Cert. PROJECT NUMBER DRAWING NUMBER REVISION
Email: [email protected]
21.101-016 S03 C3
DESCRIBED AS "CONSTRUCTION
ISSUE". No. DESCRIPTION REV. APP. Internet: www.longviewconsulting.com.au F.M. F.M. 19951
Page 4
KICK BOARD 1-M16 BOLT S.S. KICK BOARD 32x140 MERBAU KICK BOARD 32x140 MERBAU 32x140 MERBAU
BY BUILDER J1 TO P1 BY BUILDER DECKING OVER BY BUILDER DECKING OVER DECKING OVER
TYPICAL.
J1 J1 J1 J1
B1
2-M16 BOLT S.S.
J1
MIN
MIN
B1 ABUT J1 ENDS
80
80
B1 TO P1
1-M16 BOLT S.S. 1-M16 BOLT S.S. 1-M16 BOLT S.S.
25 STAGGERED
B1
J1 TO B1 PER J1 TO EA B1 J1 TO B1
TYPICAL.
B1
B1
RECESS 25 TYPICAL. TYPICAL.
B1
80 25 TYPICAL.
RECESS MIN. RECESS
2-M16 BOLT S.S.
B1 TO P1
P1
P1
P1
TYPICAL.
JOIST & BEAM TO PILE BEAM TO PILE JOIST TO BEAM EXTERNAL JOIST BUTT INTERNAL JOIST TO BEAM
TYPICAL DETAIL TYPICAL DETAIL TYPICAL DETAIL JOINT TYPICAL DETAIL TYPICAL DETAIL
1:10 1:10 1:10 1:10 1:10
B1(u)
B1(u)
1-M16 BOLT
P1
S.S. THRU.
1-M16 BOLT S.S.
J1 J1 TO B1
TYPICAL. DJ1 DJ1 DJ2
NOTCH OUT MIN. 25mm
DEEP SEAT AT BEARER
& JOIST CONNECTIONS.
TYP. 1-M16 BOLT S.S. THRU
TO BEAMS REFER TJ
TYPICAL DETAIL EXT.
JOIST BUTT JOINT. TJ
1-M16 BOLT S.S. J1
J1 TO P1
TYPICAL.
1-M16 BOLT S.S.
JOISTS & ANGLED TRIMMER TO JOIST TO ANGLED TRIMMER
B1 TO P1 DOUBLE BEARER PIER : DETAIL (PLAN) TYPICAL DETAIL (PLAN)
TYPICAL.
P1
1:10 1:10
J1
/B2 LAMINATING SCREW S.S. FIXINGS
B1 VERTICALLY STAGGERED PER
CL.2.3 AS 1684.2 TO MIN. 60mm
EMBEDMENT TYPE 17 No.14 S.S.
1-M16 BOLT DJ1 BATTEN SCREWS MIN. SIZE.
S.S. THRU.
P1
MAX.
CRS
400
B2
DJ2
100
P1
DJ1
TJ
PILE TO BEAM TO JOIST - TYPICAL VIEW TRIMMER JOIST TO PIER DETAIL (PLAN) LAMINATED DECKHEAD BEARER
1:10 1:10 B2 TO PILE DETAIL (PLAN)
1:10
CONSTRUCTION
© THIS DRAWING IS PROTECTED ASSOCIATED CONSULTANTS PROJECT DRAWING TITLE
UNDER COPYRIGHT IN
ACCORDANCE WITH
AGREEMENT BETWEEN
LODESTAR MERIDIAN PTY LTD
NOOSA JETTY SERVICES
Email: [email protected]
Phone: 0408 137 526
Long View EXISTING JETTY REPLACEMENT
31 SALTWATER AVENUE, NOOSAVILLE, 4566, QLD
JETTY FRAMING DETAILS SHEET 1
T/AS LONG VIEW CONSULTING
L Consulting Engineers
REVISIONS
ENGINEERS AND THE CLIENT AS
NAMED HEREIN. EXCLUSIVE
1 CONSTRUCTION ISSUE C3 F.M.
Lodestar Meridian Pty Ltd T/as Long View Consulting Engineers DRAWN CHECKED APPROVED DATE SCALE BAR DRAWING SCALES DRAWING SIZE
USE IS GRANTED UNDER THE
AGREEMENT ONLY FOR THE 1 CONSTRUCTION ISSUE C2 F.M. V Post: PO Box 963 Cooroy QLD 4563
N.N. N.N. 21/07/2026 1:10 A1 ORIGINAL
ABN: 87 711 552 832
PROJECT. THIS DRAWING SHALL
NOT BE CONSTRUCTED UNLESS 1 CONSTRUCTION ISSUE C1 F.M. Mobile: 0414 681 676
DESIGNED CHECKED RPEQ / Cert. PROJECT NUMBER DRAWING NUMBER REVISION
Email: [email protected]
21.101-016 S04 C3
DESCRIBED AS "CONSTRUCTION
ISSUE". No. DESCRIPTION REV. APP. Internet: www.longviewconsulting.com.au F.M. F.M. 19951
Page 5
KICK BOARD
10 PLATE CLEAT (150 Sq.)
BY BUILDER
CFW TO BOX
4/75 Lg. BATTEN SCREWS
50 x 50 x 4 TO JOIST (TYP.)
ALUMINUM ANGLE
BUTT JOINT TO BOX SIDE FACE 6 SEAL PLATE DECKING
CFW ALL ROUND CFW TO BOX REFER PLAN
140 x 35 HWD.
2-M12 x 50Lg. S.S COACH SCREWS
DECKING
STEP AND
FASCIA
FIXED TO
BUILDERS
J1
J1
J1
J1
400
DETAILS
50x50x4 BOX
50 x 50 x 4 ALUMINUM ANGLE
BUTT JOINT TO BOX END
CFW ALL ROUND
510 MAX. 960 2-M12 x 50Lg. S.S COACH SCREWS
10 AL. END PLATE MITRE JOINT
CFW TO BOX (BOX SECTIONS)
CFW ALL ROUND
KAYAK STEP TO BE A FULLY
KAYAK STEP WELDED ALUMINUM FRAME.
BUTT MITRE JOINTS,
TYPICAL SECTION DETAIL CFW ALL ROUND.
1:10
50x50x4
250
AL. BOX
50
x 50 HANDRAIL TO BE A FULLY
x4 WELDED ALUMINUM FRAME.
50
AL
BUTT JOINTS & CFW ALL ROUND.
x5
. BO
0x
4
X
AL
.
CL CL
2000 MAX.
700
6 SEAL PLATE POST SPACING
CL
CFW TO HAND RAIL
EACH END. 100x50x3 BOX ON FLAT
50x50x4
AL. BOX
150
1950
50
x5
0x
50
4
x5
AL
0x
.B
4
O
AL
X
75x75x5 BOX
75x75x5 BOX
75x75x5 BOX
.
DECKING STEP
900
J1 OVER
J1 OVER
J1 OVER
J1 OVER
750
50x50x4
AL. BOX
50
x 50
175
x4 J1
50
AL
250
x
.
50
BO 2-M12 S.S. BOLTS
x4
X
J1
6 BASE PLATE 2-M12 S.S. BOLTS
AL
WITH OVERSIZED
.
CFW TO BOX WITH OVERSIZED WASHERS WASHERS
PROVIDE 10Ø TO JOIST. TO JOIST.
WEEPHOLE.
KAYAK STEP ALUMINUM HANDRAIL ALUMINUM HANDRAIL
TYPICAL PLAN DETAIL TYPICAL ELEVATION TYPICAL SECTION
1:10 1:10 1:10
CONSTRUCTION
© THIS DRAWING IS PROTECTED ASSOCIATED CONSULTANTS PROJECT DRAWING TITLE
UNDER COPYRIGHT IN
ACCORDANCE WITH
AGREEMENT BETWEEN
LODESTAR MERIDIAN PTY LTD
NOOSA JETTY SERVICES
Email: [email protected]
Phone: 0408 137 526
Long View EXISTING JETTY REPLACEMENT
31 SALTWATER AVENUE, NOOSAVILLE, 4566, QLD
JETTY FRAMING DETAILS SHEET 2
T/AS LONG VIEW CONSULTING
L Consulting Engineers
REVISIONS
ENGINEERS AND THE CLIENT AS
NAMED HEREIN. EXCLUSIVE
1 CONSTRUCTION ISSUE C3 F.M.
Lodestar Meridian Pty Ltd T/as Long View Consulting Engineers DRAWN CHECKED APPROVED DATE SCALE BAR DRAWING SCALES DRAWING SIZE
USE IS GRANTED UNDER THE
AGREEMENT ONLY FOR THE 1 CONSTRUCTION ISSUE C2 F.M. V Post: PO Box 963 Cooroy QLD 4563
N.N. N.N. 21/07/2026 1:10 A1 ORIGINAL
ABN: 87 711 552 832
PROJECT. THIS DRAWING SHALL
NOT BE CONSTRUCTED UNLESS 1 CONSTRUCTION ISSUE C1 F.M. Mobile: 0414 681 676
DESIGNED CHECKED RPEQ / Cert. PROJECT NUMBER DRAWING NUMBER REVISION
Email: [email protected]
21.101-016 S05 C3
DESCRIBED AS "CONSTRUCTION
ISSUE". No. DESCRIPTION REV. APP. Internet: www.longviewconsulting.com.au F.M. F.M. 19951
Page 6
Used in these records
21.101_16_31 Saltwater Ave Jetty.pdfRelated documentApplication case desk ↗
About this file
- File size
- 2.3 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.