MCU14/0049 & OPW14/0276: IDAS form 1-5-6

Page 2

 

Email address (non-mandatory requirement) [email protected]

 

 

Applicant's reference number (non-mandatory 01631
requirement)

 

 

 

1. What is the nature of the development proposed and what type of approval is being sought?

 

 

Table A—Aspect 1 of the application (If there are additional aspects to the application please list in Table B—Aspect 2.)

 

a) What is the nature of the development? (Please only tick one box.)
v Material change of use = [_] Reconfiguring a lot LJ Building work ] Operational work

b) What is the approval type? (Please only tick one box.)

(] Preliminary approval (] Preliminary approval v Development permit
under s241 of SPA under s241 and s242
of SPA

c) Provide a brief description of the proposal, including use definition and number of buildings or structures where
applicable (e.g. six unit apartment building defined as a multi-unit dwelling, 30 lot residential subdivision etc.)

 

Industrial Business Type 2 (self storage)

 

 

 

d) Whatis the level of assessment? (Please only tick one box.)

[_] Impact assessment ¥ Code assessment

 

 

Table B—Aspect 2 of the application (If there are additional aspects to the application please list in Table C—
Additional aspects of the application.)

 

a) What is the nature of development? (Please only tick one box.)
C] Material change of use LC Reconfiguring a lot CO Building work oO Operational work

b) What is the approval type? (Please only tick one box.)

C] Preliminary approval C Preliminary approval CJ Development
under s241 of SPA under $241 and s242 permit
of SPA

c) Provide a brief description of the proposal, including use definition and number of buildings or structures where
applicable (e.g. six unit apartment building defined as a multi-unit dwelling, 30 lot residential subdivision etc.)

 

 

 

 

d) Whatis the level of assessment?

CL] Impact assessment CT Code assessment

 

 

Table C—Additional aspects of the application (If there are additional aspects to the application please list in a
separate table on an extra page and attach to this form.)

 

 

(_] Refer attached schedule ~ Not required

 

 

IDAS form 1—Application details
Version 3.0—1 July 2013

Page 3

 

2. Location of the premises (Complete Table D and/or Table E as applicable. Identify each lot in a separate row.)

 

 

Table D—Street address and lot on plan for the premises or street address and lot on plan for the land adjoining or
adjacent to the premises (Note: this table is to be used for applications involving taking or interfering with water).
(Attach a separate schedule if there is insufficient space in this table.)

 

v Street address and lot on plan (All lots must be listed.)

oO Street address and lot on plan for the land adjoining or adjacent to the premises (Appropriate for
development in water but adjoining or adjacent to land, e.g. jetty, pontoon. All lots must be listed.)

 

 

 

 

 

Street address Lot on plan Local government area
description (e.g. Logan, Cairns)
Lot Unit Street Street name and official Post- Lot no. Plan type
no. no. suburb/ locality name code and plan no.
i) 64-66 Rene Street Noosaville | 4566 280 $P104321 Noosa
ii)
iii)

 

 

 

 

 

 

 

Planning scheme details (If the premises involves multiple zones, clearly identify the relevant zone/s for each lot in a
separate row in the below table. Non-mandatory)

 

 

Lot Applicable zone / precinct Applicable local plan / precinct Applicable overlay/s
i) Industry Noosaville Locality Natural Hazard — Bushfire and Acid
Sulfate Soils

 

ii)
iii)

 

 

 

 

 

 

Table E—Premises coordinates (Appropriate for development in remote areas, over part of a lot or in water not
adjoining or adjacent to land e.g. channel dredging in Moreton Bay.) (Attach a separate schedule if there is insufficient
space in this table.)

 

 

 

Coordinates Zone Datum Local government
(Note: place each set of coordinates in a separate row) reference area (if applicable)
Easting Northing Latitude Longitude

[] «epae4

L] wess4

C] other

 

 

 

 

 

 

 

 

3. Total area of the premises on which the development is proposed (indicate square metres)

 

 

4050m2

 

 

4. Current use/s of the premises (e.g. vacant land, house, apartment building, cane farm etc.)

 

 

 

Storage sheds and associated carparking/hardstand area

 

 

IDAS form 1—Application details
Version 3.0—1 July 2013

Page 4

    

 

5. Are there any current approvals (e.g. a preliminary approval) associated with this. application? (Non-
mandatory requirement) :

 

vy No [-]  Yes—provide details below

 

 

 

 

 

 

 

 

 

 

 

List of approval reference/s Date approved (dd/mm/yy) Date approval lapses (dd/mm/yy)
| 6. Is owner’s consent required for this application? (Refer to notes at the énd:of this form-for-more information.)
[] No
v  Yes—complete either Table F, Table G or Table H as applicable
Table F
Name of owner/s of the land Sharpe Enterprises ATF Phoenix Property Trust

 

IMWe, the above-mentioned owner/s of the land, eepsént}o the making of this application.

 

Signature of owner/s of the land
Oi deci.

 

 

Date 2% [06 [ 201g.
Table G

Name of owner/s of the land

 

 

 

 

C] The owner's written consent is attached or will be provided separately to the assessment manager.

 

 

Table H
Name of owner/s of the land

 

 

 

CL By making this application, |, the applicant, declare that the owner has given written consent to the making of the application.

 

 

”

 

 

Identify if any of the following apply to the premises (Tick applicable box/es.)

 

Adjacent to a water body, watercourse or aquifer (e.g. creek, river, lake, canal)—complete Table |

On strategic port land under the Transport Infrastructure Act 1 994—complete Table J

|
Ll In a tidal water area—complete Table K
im On Brisbane core port land under the Transport Infrastructure Act 1994 (No table requires completion.)

On airport land under the Airport Assets (Restructuring and Disposal) Act 2008 (no table requires completion)

 

Table |

 

Name of water body, watercourse or aquifer

 

 

 

Table J

 

Lot on plan description for strategic port land Port authority for the lot

 

 

 

 

 

IDAS form 1---A;
Version

  

Page 5

 

Table K

 

Name of local government for the tidal area (if applicable) Port authority for the tidal area (if applicable)

 

 

 

 

8. Are there any existing easements on the premises? (e.g. for vehicular access, electricity, overland flow,
water etc)

 

C] No v Yes—ensure the type, location and dimension of each easement is included in the plans submitted

 

9. Does the proposal include new building work or operational work on the premises? (Including any
services)

 

L] No v Yes—ensure the nature, location and dimension of proposed works are included in plans submitted

 

10. Is the payment of a portable long service leave levy applicable to this application? (Refer to notes at the

 

end of this form for more information.)

¥ No—go to question 12 [] Yes

 

 

11. Has the portable long service leave levy been paid? (Refer to notes at the end of this form for more
information.)

 

 

[] No

Yes—complete Table L and submit with this application the yellow local government/private certifier’s copy of the
receipted QLeave form

 

Table L

 

Amount paid Date paid QLeave project number (6 digit number
(dd/mm/yy) starting with A, B, E, L or P)

 

 

 

 

 

 

12. Has the local government agreed to apply a superseded planning scheme to this application under
section 96 of the Sustainable Planning Act 2009?

 

 

vy No
C] Yes—please provide details below

 

Name of local government Date of written notice given | Reference number of written notice given
by local government by local government (if applicable)
(dd/mm/yy)

 

 

 

 

 

 

IDAS form 1—Application details
Version 3.0—1 July 2013

Page 6

 

13. List below all of the forms and supporting information that accompany this application (Include all IDAS
forms, checklists, mandatory supporting information etc. that will be submitted as part of this application. Note:
this question does not apply for applications made online using MyDAS)

 

 

 

 

Description of attachment or title of attachment Method of lodgement to
assessment manager

Martoo Consulting Planning Statement and Proposal plans Electronic

IDAS Form 5 Electronic

 

 

 

 

 

 

14. Applicant’s declaration

 

 

¥ By making this application, | declare that all information in this application is true and correct (Note: it is unlawful to
provide false or misleading information)

 

 

 

Notes for completing this form

¢ Section 261 of the Sustainable Planning Act 2009 prescribes when an application is a properly-made application.
Note, the assessment manager has discretion to accept an application as properly made despite any non-
compliance with the requirement to provide mandatory supporting information under section 260(1)(c) of the
Sustainable Planning Act 2009

Applicant details
¢ Where the applicant is not a natural person, ensure the applicant entity is a real legal entity.

Question 1
¢ Schedule 3 of the Sustainable Planning Regulation 2009 identifies assessable development and the type of
assessment. Where schedule 3 identifies assessable development as “various aspects of development’ the
applicant must identify each aspect of the development on Tables A, B and C respectively and as required.

Question 6

e Section 263 of the Sustainable Planning Act 2009 sets out when the consent of the owner of the land is required for
an application. Section 260(1)(e) of the Sustainable Planning Act 2009 provides that if the owner's consent is
required under section 263, then an application must contain, or be accompanied by, the written consent of the
owner, or include a declaration by the applicant that the owner has given written consent to the making of the
application. If a development application relates to a state resource, the application is not required to be supported
by evidence of an allocation or entitlement to a state resource. However, where the state is the owner of the
subject land, the written consent of the state, as landowner, may be required. Allocation or entitlement to the state
resource is a separate process and will need to be obtained before development commences.

Question 11

¢ The Building and Construction Industry (Portable Long Service Leave) Act 1991 prescribes when the portable long
service leave levy is payable.

¢ The portable long service leave levy amount and other prescribed percentages and rates for calculating the levy
are prescribed in the Building and Construction Industry (Portable Long Service Leave) Regulation 2002.

IDAS form 1—Application details
Version 3.0—1 July 2013

Page 7

Question 12

° The portable long service leave levy need not be paid when the application is made, but the Building and
Construction Industry (Portable Long Service Leave) Act 1991 requires the levy to be paid before a development
permit is issued.

¢ Building and construction industry notification and payment forms are available from any Queensland post office or
agency, on request from QLeave, or can be completed on the QLeave website at www.gleave.qld.gov.au. For
further information contact QLeave on 1800 803 481 or visit www.qleave.qid.gov.au.

Privacy—The information collected in this form will be used by the Department of State Development, Infrastructure
and Planning (DSDIP), assessment manager, referral agency and/or building certifier in accordance with the
processing and assessment of your application. Your personal details should not be disclosed for a purpose outside of
the IDAS process or the provisions about public access to planning and development information in the Sustainable
Planning Act 2009, except where required by legislation (including the Right fo Information Act 2009) or as required by
Parliament. This information may be stored in relevant databases. The information collected will be retained as
required by the Public Records Act 2002.

 

OFFICE USE ONLY

 

 

 

 

Date received Reference numbers

 

 

 

NOTIFICATION OF ENGAGEMENT OF A PRIVATE CERTIFIER

 

To Council. | have been engaged as the private certifier for the
building work referred to in this application

 

 

 

 

BSA Certification license Building
Date of engagement | Name number classification/s

 

 

 

 

 

QLEAVE NOTIFICATION AND PAYMENT (For completion by assessment manager or private certifier if
applicable.)

 

Date receipted
form sighted by
assessment
manager

Name of officer
who sighted the
form

QLeave project Amount paid

number (3) Date paid

Description of the work

 

 

 

 

 

 

 

 

 

The Sustainable Planning Act 2009 is administered by the Department of State Development, Infrastructure and
Planning. This form and all other required application materials should be sent to your assessment manager and any
referral agency.

Department of State Development, infrastructure and Planning

PO Box 15009 City East Qld 4002

tel 13 QGOV (13 74 68)

[email protected] IDAS form 1—Application details
Si — 4 July 207

www-dsdip.qid.gov.au Version 3.0. July 2073

Page 8

IDAS form 5—Material change of use assessable
against a planning scheme
(Sustainable Planning Act 2009 version 3.0 effective 1 July 2013)

This form must be used for development applications for a material change of use assessable against a planning
scheme.

You MUST complete ALL questions that are stated to be a mandatory requirement unless otherwise identified on this
form.

For all development applications, you must:
•     complete IDAS form 1—Application details
•     complete any other forms relevant to your application
•    provide any mandatory supporting information identified on the forms as being required to accompany your
     application.
Attach extra pages if there is insufficient space on this form.

All terms used on this form have the meaning given in the Sustainable Planning Act 2009 (SPA) or the Sustainable
Planning Regulation 2009.

This form must also be used for material change of use on strategic port land and Brisbane core port land under the
Transport Infrastructure Act 1994 and airport land under the Airport Assets (Restructuring and Disposal) Act 2008 that
requires assessment against the land use plan for that land. Whenever a planning scheme is mentioned, take it to
mean land use plan for the strategic port land, Brisbane core port land or airport land.

This form can also be completed online using MyDAS at www.dsdip.qld.gov.au/MyDAS

Mandatory requirements

1.     Describe the proposed use. (Note: this is to provide additional detail to the information provided in question 1
       of IDAS form 1—Application details. Attach a separate schedule if there is insufficient space in this table.)

General explanation of the                   Planning scheme              No. of dwelling units    Days and          No. of
proposed use                                 definition (include each     (if applicable) or       hours of          employees
                                             definition in a new row)     gross floor area (if     operation         (if applicable)
                                             (non-mandatory)              applicable)              (if applicable)
Warehouse – Self Storage Units               Industrial Business Type     2176m2                   24 hours          2
                                             1 Warehouse




2.     Are there any current approvals associated with the proposed material change of use?
       (e.g. a preliminary approval.)

       No                Yes—provide details below

List of approval reference/s                               Date approved (dd/mm/yy)           Date approval lapses (dd/mm/yy)



                                                                                      IDAS form 5—Material change of use assessable
                                                                                                          against a planning scheme
                                                                                                            Version 3.0—1July 2013

Page 9

3.     Does the proposed use involve the following? (Tick all applicable boxes.)

The reuse of existing buildings on the premises                   No                Yes
New building work on the premises                                 No                Yes
The reuse of existing operational work on the premises            No                Yes
New operational work on the premises                              No                Yes

Mandatory supporting information

4.     Confirm that the following mandatory supporting information accompanies this application

Mandatory supporting information                                                   Confirmation of     Method of
                                                                                   lodgement           lodgement
All applications
A site plan drawn to an appropriate scale (1:100, 1:200 or 1:500 are                Confirmed
recommended scales) which shows the following:
•    the location and site area of the land to which the application relates
     (relevant land)
•    the north point
•    the boundaries of the relevant land
•    any road frontages of the relevant land, including the name of the road
•    the location and use of any existing or proposed buildings or structures
     on the relevant land (note: where extensive demolition or new buildings
     are proposed, two separate plans [an existing site plan and proposed site
     plan] may be appropriate)
•    any existing or proposed easements on the relevant land and their
     function
•    the location and use of buildings on land adjoining the relevant land
•    all vehicle access points and any existing or proposed car parking areas
     on the relevant land. Car parking spaces for persons with disabilities and
     any service vehicle access and parking should be clearly marked
•    for any new building on the relevant land, the location of refuse storage
•    the location of any proposed retaining walls on the relevant land and their
     height
•    the location of any proposed landscaping on the relevant land
•    the location of any stormwater detention on the relevant land.

A statement about how the proposed development addresses the local                   Confirmed
government’s planning scheme and any other planning instruments or
documents relevant to the application.
A statement about the intensity and scale of the proposed use (e.g. number           Confirmed
of visitors, number of seats, capacity of storage area etc.).
Information that states:                                                             Confirmed
•    the existing or proposed floor area, site cover, maximum number of               Not applicable
     storeys and maximum height above natural ground level for existing or
     new buildings (e.g. information regarding existing buildings but not being
     reused)
•    the existing or proposed number of on-site car parking bays, type of
     vehicle cross-over (for non-residential uses) and vehicular servicing
     arrangement (for non-residential uses).


                                                                              IDAS form 5—Material change of use assessable
                                                                                                  against a planning scheme
                                                                                                    Version 3.0—1July 2013

Page 10

    A statement addressing the relevant part(s) of the State Development                   Confirmed
    Assessment Provisions (SDAP).                                                         Not applicable
    When the application involves the reuse of existing buildings

    Plans showing the size, location, existing floor area, existing site cover,            Confirmed
    existing maximum number of storeys and existing maximum height above                  Not applicable
    natural ground level of the buildings to be reused.

    When the application involves new building work (including extensions)

    Floor plans drawn to an appropriate scale (1:50, 1:100 or 1:200 are                   Confirmed
    recommended scales) which show the following:
    •   the north point
    •   the intended use of each area on the floor plan (for commercial, industrial
        or mixed use developments only)
    •   the room layout (for residential development only) with all rooms clearly
        labelled
    •   the existing and the proposed built form (for extensions only)
    •   the gross floor area of each proposed floor area.
    Elevations drawn to an appropriate scale (1:100, 1:200 or 1:500 are                   Confirmed
    recommended scales) which show plans of all building elevations and
    facades, clearly labelled to identify orientation (e.g. north elevation)

    Plans showing the size, location, proposed site cover, proposed maximum              Confirmed
    number of storeys, and proposed maximum height above natural ground level             Not applicable
    of the proposed new building work.
    When the application involves reuse of other existing work
    Plans showing the nature, location, number of on-site car parking bays,               Confirmed
    existing area of landscaping, existing type of vehicular cross-over (non-              Not applicable
    residential uses), and existing type of vehicular servicing arrangement (non-
    residential uses) of the work to be reused.
    When the application involves new operational work
    Plans showing the nature, location, number of new on-site car parking bays,          Confirmed
    proposed area of new landscaping, proposed type of new vehicle cross-over             Not applicable
    (non-residential uses), proposed maximum new vehicular servicing
    arrangement (non-residential uses) of the proposed new operational work.


   Privacy—Please refer to your assessment manager, referral agency and/or building certifier for further details on the
   use of information recorded in this form.


   OFFICE USE ONLY

    Date received                                              Reference numbers


   The Sustainable Planning Act 2009 is administered by the Department of State Development, Infrastructure and
   Planning. This form and all other required application materials should be sent to your assessment manager and any
   referral agency.




Department of State Development, Infrastructure and Planning
PO Box 15009 City East Qld 4002
tel 13 QGOV (13 74 68)                                                              IDAS form 5—Material change of use assessable
[email protected]                                                                                   against a planning scheme
                                                                                                          Version 3.0—1July 2013
www.dsdip.qld.gov.au

Page 11

IDAS form 6—Building or operational work assessable
against a planning scheme
(Sustainable Planning Act 2009 version 3.0 effective 1 July 2013)

This form must be used for development applications for building work or operational work assessable against a
planning scheme.

You MUST complete ALL questions that are stated to be a mandatory requirement unless otherwise identified on this
form.

For all development applications, you must:
•      complete IDAS form 1—Application details
•      complete any other forms relevant to your application
•    provide any mandatory supporting information identified on the forms as being required to accompany your
     application.
Attach extra pages if there is insufficient space on this form.

All terms used on this form have the meaning given in the Sustainable Planning Act 2009 (SPA) or the Sustainable
Planning Regulation 2009.

This form must be used for building work or operational work relating on strategic port land and Brisbane core port land
under the Transport Infrastructure Act 1994 and airport land under the Airport Assets (Restructuring and Disposal) Act
2008 that requires assessment against the land use plan for that land. Whenever a planning scheme is mentioned,
take it to mean land use plan for the strategic port land, Brisbane core port land or airport land.

This form can also be completed online using MyDAS at www.dsdip.qld.gov.au/MyDAS

Mandatory requirements

1.      What is the nature of the work that requires assessment against a planning scheme? (Tick all applicable
        boxes.)

             Building work—complete Table A                          Operational work—complete Table B

Table A
a)     What is the nature of the building work (e.g. building, repairing, altering, underpinning, moving or demolishing a
       building)?




b)     Are there any current approvals associated with this application? (e.g. material change of use.)
             No                 Yes— provide details below

     List of approval reference/s                            Date approved (dd/mm/yy)    Date approval lapses (dd/mm/yy)

Page 12

Table B
a)    What is the nature of the operational work? (Tick all applicable boxes.)
            Road works                       Stormwater              Water infrastructure

            Drainage works                   Earthworks              Sewerage infrastructure

            Landscaping                      Signage                 Clearing vegetation under the planning scheme

            Other—provide details

b)    Is the operational work necessary to facilitate the creation of new lots? (E.g. subdivision.)
            No         Yes—specify the number of lots being created

c)    Are there any current approvals associated with this application? (E.g. material change of use.)
            No         Yes—provide details below

     List of approval reference/s                   Date approved (dd/mm/yy)          Date approval lapses (dd/mm/yy)




2.      What is the dollar value of the proposed building work?                                        $ unknown
        (Inc GST, materials and labour.)

3.      What is the dollar value of the proposed operational work?                                     $ unknown
        (Inc GST, materials and labour.)

Mandatory supporting information

4.      Confirm that the following mandatory supporting information accompanies this application

Mandatory supporting information                                                    Confirmation of       Method of
                                                                                    lodgement             lodgement

All applications involving building work or operational work
A site plan drawn to an appropriate scale (1:100, 1:200 or 1:500 are                  Confirmed
recommended scales) which shows the following:
• the location and site area of the land to which the application relates
     (relevant land)
• the north point
• the boundaries of the relevant land
• the allotment layout showing existing lots, any proposed lots (including the
  dimensions of those lots), existing or proposed road reserves, building
  envelopes and existing or proposed open space (note: numbering is
  required for all lots)
• any existing or proposed easements on the relevant land and their
  function
• any access limitation strips
• all existing and proposed roads and access points on the relevant land.
A statement about how the proposed development addresses the local                     Confirmed
                                                                            IDAS form 6—Building or operational work assessable
                                                                                                     against a planning scheme
                                                                                                       Version 3.0—1 July 2013

Page 13

government’s planning schemes and any other planning documents relevant
to the application.
A statement addressing the relevant part(s) of the State Development                    Confirmed
Assessment Provisions (SDAP).                                                          Not applicable
Applications for building work (including extensions and demolition that is assessable development)
Floor plans drawn to an appropriate scale (1:50, 1:100 or 1:200 are                     Confirmed
recommended scales) which show the following:                                           Not applicable
•   the north point
•   the intended use of each area on the floor plan (for commercial, industrial
    or mixed use developments only)
•   the room layout (for residential development only) with all rooms clearly
    labelled
•   the existing and the proposed built form (for extensions only)
•   the gross floor area of each proposed floor area.
Elevations drawn to an appropriate scale (1:100, 1:200 or 1:500 are                     Confirmed
recommended scales) which show plans of all building elevations and                    Not applicable
facades, clearly labelled to identify orientation (e.g. north elevation).
Plans showing the size, location, proposed site cover, proposed maximum                Confirmed
number of storeys, and proposed maximum height above natural ground level             Not applicable
of the proposed new building work.
Plans showing the extent of any demolition that is assessable development.             Confirmed
                                                                                      Not applicable
Applications for operational work involving earthworks (filling and excavating)
Drawings showing:                                                                       Confirmed
• existing and proposed contours                                                       Not applicable
• areas to be cut and filled
• the location and level of any permanent survey marks or reference
  stations used as datum for the works
• the location of any proposed retaining walls on the relevant land and their
  height
• the defined flood level (if applicable)
• the fill level (if applicable).
Applications for operational work involving roadworks
Drawings showing:                                                                      Confirmed
• existing and proposed contours                                                      Not applicable
• the centreline or construction line showing chainages, bearings, offsets if
    the construction line is not the centreline of the road and all intersection
    points
•   information for each curve including tangent point chainages and offsets,
    curve radii, arc length, tangent length, superelevation (if applicable) and
    curve widening (if applicable)
•   kerb lines including kerb radii (where not parallel to centreline) and
    tangent point changes (where not parallel to centreline)
•   edge of pavement where kerb is not constructed
•   position and extent of channelisation
•   location and details of all traffic signs, guideposts, guardrail and other
    street furniture
•   pavement markings including details on raised pavement markers
•   catchpit, manhole and pipeline locations
•   drainage details (if applicable)
                                                                            IDAS form 6—Building or operational work assessable
                                                                                                     against a planning scheme
                                                                                                       Version 3.0—1 July 2013

Page 14

•   cross road drainage culverts (if applicable)
•   concrete footpaths and cycle paths
•   location and details for access points, ramps and invert crossings
•   changes in surfacing material.
Applications for operational work involving stormwater drainage
Drawings showing:                                                                     Confirmed
• existing and proposed contours                                                     Not applicable
• drainage locations, diameters and class of pipe, open drains and
  easements
• manhole location, chainage and offset or coordinates and inlet and outlet
  invert levels
• inlet pit locations, chainage and offset or coordinates and invert and kerb
  levels.
Applications for operational work involving water reticulation
Drawings showing:                                                                    Confirmed
• kerb lines or edge of pavement where kerb is not constructed                      Not applicable
• location and levels of other utility services where affected by water
    reticulation works
•   pipe diameter, type of pipe and pipe alignment
•   water main alignments
•   water supply pump station details (if applicable)
•   minor reservoir details (if applicable)
•   conduits
•   location of valves and fire hydrants
•   location of house connections (if applicable)
•   location of bench marks and reference pegs.
Applications for operational work involving sewerage reticulation
Drawings showing:                                                                    Confirmed
•   location of all existing and proposed services                                  Not applicable
•   location of all existing and proposed sewer lines and manhole locations
•   location of all house connection branches
•   kerb lines or edge of pavement where kerb is not constructed
•   chainages
•   design sewer invert levels
•   design top of manhole levels
•   type of manhole and manhole cover
•   pipe diameter, type of pipe and pipe alignment
•   location of house connections (if applicable)
•   sewer pump station details (if applicable).
Applications for operational work involving street lighting
Drawings showing:                                                                     Confirmed
•   location of all light poles and service conduits                                 Not applicable
•   location of all other cross road conduits
•   type of wattage and lighting
•   any traffic calming devices
•   additional plans for roundabouts and major roads (if applicable)
•   details of any variations to normal alignment
•   details of lighting levels.


                                                                          IDAS form 6—Building or operational work assessable
                                                                                                   against a planning scheme
                                                                                                     Version 3.0—1 July 2013

Page 15

    Applications for operational work involving public utility services
    Drawings showing:                                                                      Confirmed
    •   any existing light poles and power poles                                          Not applicable
    •   any existing underground services
    •   details of proposed services
    •   alteration to existing services.
    Applications for operational work involving landscaping works
    Drawings showing:                                                                     Confirmed
    • the location of proposed plant species                                             Not applicable
    • a plant schedule indicating common and botanical names, pot sizes and
        numbers of plants
    •   planting bed preparation details including topsoil depth, subgrade
        preparation, mulch type and depth, type of turf, pebble, paving and garden
        edge
    •   the location and type of any existing trees to be retained
    •   construction details of planter boxes, retaining walls and fences
    •   the proposed maintenance period
    •   irrigation system details.

   Privacy—Please refer to your assessment manager, referral agency and/or building certifier for further details on the
   use of information recorded in this form.


   OFFICE USE ONLY

    Date received                                              Reference numbers


   The Sustainable Planning Act 2009 is administered by the Department of State Development, Infrastructure and
   Planning. This form and all other required application materials should be sent to your assessment manager and any
   referral agency.




Department of State Development, Infrastructure and Planning
PO Box 15009 City East Qld 4002
tel 13 QGOV (13 74 68)                                                         IDAS form 6—Building or operational work assessable
[email protected]                                                                                   against a planning scheme
                                                                                                          Version 3.0—1 July 2013
www.dsdip.qld.gov.au

Page 16

              [email protected] & [email protected]




             Bill Sharpe
            [email protected]




Sharpe Enterprises Pty Ltd
64 -66 Rene Street, Noosaville Qld 4566
Lot 280 on SP104321

MCU - Industrial Business Type 1 - warehouse (Storage sheds) and Signage