SUPERSEDED Reference Document

                                                                                          ADG Consulting Pty Ltd


8    Limitations
     ADG Consulting Pty Ltd has prepared this report for Eddie Hirsch care of Paul Clout Designs Pty Ltd in
     accordance with the agreed scope of work. The services performed by ADG have been conducted in a
     manner consistent with the normal level of care and expertise exercised by members of the
     environmental consulting profession. No other warranty or guarantee, expressed or implied, is made as
     to the professional advice included in this report.

     This report is solely for the use of Eddie Hirsch and Paul Clout Designs Pty Ltd and ADG accepts no
     responsibility for the use of any part of this report for any other purpose or by third parties, as it may not
     contain sufficient information for the purposes of other parties or users. This report must only be
     presented in full, and may not be used for any other objective, except where prior written approval is
     obtained from ADG. This report does not comment on legal obligations, as legal advice can only be given
     by qualified legal practitioners.

     The information contained in this report is provided to minimise potential impacts on the receiving
     environment, however implementation of the described management procedures does not guarantee
     that the objectives will be achieved.

     The information contained in this report is considered to be accurate at the date of issue. Subsurface
     conditions, including contaminant concentrations can change in space and time, either through natural
     processes or by the accidental or intentional addition of contaminants to a site. Where conditions
     encountered subsequently at the site are significantly different from those reported herein, ADG must
     be notified and be provided the opportunity to review the conclusions and recommendations of this
     report.




ADG1668.24 Dewatering Management Plan_Rev0_12.07.24                                                         Page 19