Negotiated Decision Notice - 010.2007.00001446.001 [As Published] · 132007.1446

                                               -7-



             The site area for the storage and separation of waste is to be shown on the plan
               drawings accompanying the application.
             A waste management table as indicated below is to be completed showing how waste
               material is to be segregated - recycled – reused or disposed.
           MATERIALS ON-SITE                                     DESTINATION
                                                    Re-use and Recycling                     Disposal
           Expected waste    Estimated    On-site              Off-site                *specify contractor
           materials         volume(m³)   *specify   proposed *specify contractor      and landfill site or
                                          re-use or on-site and recycling outlet       other disposal site
                                          recycling methods
           Excavation
           material
           Green waste
           Bricks
           Concrete
           Timber-please
           specify
           Plasterboard
           Metals - please
           specify
           Asbestos
           Other - please
           specify

      Note * If a demolition contractor is undertaking works, then the Waste Management table is to
      be completed by the demolition contractor.


           The purpose of the Waste Management Plan is to facilitate the segregation of waste for
           the effective reuse and recycling of such materials. Additionally Council rewards those who
           segregate waste by significantly reducing disposal fees at the landfill some items are free.
           Higher gate fees are charged for loads of mixed waste.

48.   The developer must provide waste storage and disposal facilities in accordance with Planning
      Scheme Policy “Waste Management Multi-Dwellings and Commercial and Industrial
      Premises”, including an external imperviously paved area correctly sized for all refuse and
      recycling containers and suitably screened from public places and neighbouring properties.
49.   The developer must ensure there is a safe and suitable kerbside bin pick up location, or must
      provide a safe and suitable onsite collection. NB the refuse vehicle must be able to enter and
      leave the site in a forward direction without any dangerous maneuvers.
50.   A bin wash area is required with a cold-water tap, hose and drain outlet connected to sewer,
      via a bucket trap. The drain outlet is to be designed to prevent storm water entry to the
      sewerage system and this can be achieved with a nib wall 50mm high and up to 700mm x
      700mm wide (max 0.5m²), or alternatively the waste area can be roofed, or any other design
      approved by Council.
51.   Noise emission from mechanical equipment (air conditioners, refrigeration equipment or pool
      pumps etc) shall comply with the following requirements:
      51.1. The equipment shall be installed and located in a manner that prevents excessive noise
            in accordance with Council’s Local Law No. 12 - Control of Nuisances. Infringement
            Notices (on-the-spot fines) may apply for offences.
      51.2. A person must not use equipment on any day if it makes or causes noise to be made:
                                                                                              7 of 13