Appendix C_landscape plans · MCU14/0051

PLANT SCHEDULE

TREES & PALMS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MINIMUM | MIN HEIGHT QTY [STKS/ CLPR] CLEAN
CODE BOTANICAL NAME POT SIZE_| AND SPREAD GUYS STEM
BAC cit BACKHOUSIA citriodora 2sitr 6 STKS
CUP ana CUPANIOPSIS anacardioides 45 ltr 1700x800mm 5S STKS|40mm]|1.6m
HAR pen HARPULLIA pendula 45ltr 1700x800mm 2 STKS|40mm
LIV aus LIVISTONIA australis 2m Clear Trunk _|2 STKS
XAN chr XANTHOSTEMON chrysanthus 46ltr 1700x800mm 5 STKS|40mm

 

 

HEDGING & FRUIT TREES

 

CODE DESCRIPTION

SIZE _HGT&SPRD QTY. STKS

 

 

 

 

 

 

 

 

 

CIT lat CITRINUS latifolia 25ltr 1
CIT MEY CITRINUS "Meyer Lemon" 25ltr 1
MET FF METROSIDEROS 'Fiji Fire" 200mm|_500x250mm | 30
SYZ RES SYZYGIUM 'Resilience" 200mm|_500x250mm |_76

 

 

 

 

SHRUBS

 

CODE DESCRIPTION

SIZE _HGT&SPRD QTY. STKS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ACM AM ACEMNA “Allyn Magic" 200mm|_450x250mm |_41
ALP cae ALPINIA caerulea 140mm|_250x150mm | _ 4
BLE car* BLECHNUM cartilaginum 140mm|_250x150mm | _12
CAL LJ CALLISTEMON "Little John" 200mm|_350x200mm |_ 24
(COR fru RUB|CORDYLINE fruticosa "Rubra" 200mm|_500x250mm |_25
COR str CORDYLINE stricta 200mm|_500x250mm | 5
CYA coo* _|CYATHEA cooperi I300mm| 2
CYC rev CYCAS revoluta I300mm| 3
DOR pal DORYANTHES palmeri 200mm|_350x200mm |_ 12
GRE HG GREVILLEA "Honey Gem" I200mm|_400x300mm |_7
GRE SU GREVILLEA "Superb" 200mm|_400x300mm | _7
ROS off ROSMARINUS officinalis 140mm] 250x150mm |_ 3
STR reg STRELITZIA reginae 200mm|_400x300mm |_ 6
SYZ TT SYZYGIUM "Tiny Trev' 200mm|_350x200mm |_ 9
WES fru WESTRINGIA fruticosa I200mm|_450x250mm |_27
ZAM fur ZAMIA furfuracea I300mm| 3

 

 

 

 

GROUNDCOVERS - GRASSES + CLIMBERS

 

CODE DESCRIPTION

SIZE _HGT&SPRD QTY. STKS |

 

 

 

 

 

 

 

 

 

 

 

 

DIA LJ DIANELLA caerulea "Little Jess" 140mm] 250x250mm |_ 48
HIB sca HIBBERTIA scandens 140mm] 150x150mm | 22
LIREG LIRIOPE “Evergreen Giant 200mm|_300x300mm |_ 82
LOM SH LOMANDRA 'Shara' 140mm) 150x150mm | 17
PHI XAN PHILODENDRON "Xanadu" 200mm|_150x200mm |_15
TRA jas TRACHELOSPERMUM jasminoides —_[140mm\|_150x300mm |_14
TUL vio TULBAGHIA violacea 140mm] 200x150mm | 24
ZOY ten ZOYSIA tenuifolia 140mm] 150x150mm | _ 35

 

 

 

 

Note:
* Sun-hardened stock required.

 

Plant numbers shown on plans are indicative and require final count once

the layouts are approved for construction.

Plant sizes stated are subject to availability at time of construction.

PLANTING

 

GROUNDCOVERS

LEGEND

 

EXTERNAL WORKS

 

GENERAL

 

EXTENT OF WORKS

DETAIL / SECTION REFERENCE

 

    
 

 

 

 

 

 

 

 

00 DETAIL / SECTION NUMBER
\gp-D-94 DRAWING No. CROSS REFERENCE
GRADING
+EX0.00 EXISTING SURFACE LEVEL
+0.00 RELATIVE LEVEL
Fall INDICATES DIRECTION OF
T100> DECLINING (DOWN) GRADIENT
FENCES
_ FEN-1 FENCE TYPE 1
—_/— - Refer to Detail 06 CD-200
FEN-2 FENCE TYPE 2
caeeeee - Refer to Schedule
FEN-3 FENCE TYPE 3
—=— _ -Refer to Schedule
FEN-4 FENCE TYPE 4
§ s - Refer to Schedule
WLT-1 WALL TYPE 1
e47774 — - Refer to Schedule
WLT-2 WALL TYPE 2
e227) _ Refer to Schedule
PAVEMENT FINISHES
° PAVEMENT TYPE 1
[PO1 - Refer to Schedule
PAVEMENT TYPE 2
PO2} - Refer to Schedule

 

 

 

 

 

 

 

 

PAVEMENT TYPE 3
- Refer to Schedule

PAVEMENT TYPE 4
- Refer to Schedule

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a SHRUBS TURE
/ \ PLANTING AREA
\ TREE
| +)
\ — EDGE TYPE 1 :
\ wy, FA - Refer to Detail 04 CD-200
——__ EDGETYPE2—
E2 - Refer to Detail 05 CD-200
MULCHED TREE PITS
HC HOSE COCK —
oF - Refer to Architect
WATER
t—w—__ - Refer to Survey
COMMS
MATERIALS & FINISHES SCHEDULE ~ Refer to Survey
ITEM CODE REQUIREMENTS
Wall Type 1 WLT-1 1800mm high Rendered & painted masonry wall. Refer to Architect
Wall Type 2 WLT-2 Existing 2000mm high masonry block wall. To have new render and paint finish. Refer to Architect.
Fence Type 1 FEN-1 1800mm high Treated Hardwood/Treated Pine butt-joined timber paling fence. Refer to Detail sheet CD-200
Fence Type 2 FEN-2 1800mm high HWD horizontal batten timber fence and gates as shown. Refer to Architect.
Fence Type 3 FEN-3 Existing 1800mm high timber paling fence
Fence Type 4 FEN-4 1200mm high Semi-frameless glass pool fence.
Pavement Type 1 PO1 Concrete driveway with feature colour or exposed aggregate finish. To be confirmed - refer to Engineer.
Pavement Type 2 P02 Concrete footpath. To be plain grey with broom finish.
Pavement Type 3 P03 Concrete service/washing line areas. To be plain grey with broom finish.
Pavement Type 4 P04 Formed in-situ concrete steppers with feature gravel in between. Colour to be confirmed.
Timber Deck TD Manufactured recycled timber deck system - Modwood or similar approved.
Edge Type 1 E1 Extruded concrete edge. Refer to Detail Sheet CD-200.
Edge Type 2 E2 Timber edge. Refer to Detail Sheet CD-200
Turf Type 1 Turf to be A-grade 'Winter Green Couch.

 

 

GENERAL NOTES

1. FALLS

Grade all turf and planting areas evenly in the direction shown. Ponding is not
acceptable.

2. SOIL:

Where available maximise the use of soil from on site. However, whether from site or
imported, soil is to comply with AS 4419, soils for landscaping and garden use.

All soil shall be free from noxious weeds, rocks, roots, rubbish or any other deleterious
material.

3. WEED MANAGEMENT:

All weeds listed in the Land Protection (Pest and Stock Route Management) Act 2002
and sub-ordinate Regulation 2003, and the Maroochy Pest Mangement Plan 2006-2010
(pest species of significance in Group 1, Group 2, and Group 6) must be removed from
the site in a manner that minimises regrowth, prevents damage to non-target weed
species and retains indigenous vegetation and conservation values.

4, TURF AREAS:

All turf areas to fall towards drainage pits / collection / infiltration locations. Cultivate
existing sub-grade to 150mm depth, place topsoil to a depth of 150mm. Refer Material
and Finishes Schedule for turf type.

5. PAVEMENTS AND THRESHOLDS:

All vehicular pavements by Civil. All pedestrian pavements (by Civil or refer to Material
and Finishes Schedule). Landscape plans indicate finish / material type and decorative
saw cuts - Refer to Engineers drawings for all other details and extents.

6. PLANTING:

Refer drawings for locations:

Cultivate existing sub-grade to 150mm depth, place topsoil to a depth of 300mm, place
'Hoop Pine’ mulch 100mm deep. Mound to promote positive drainage as indicated on
detail. Refer to planting plan for typical coded plant layout. Refer to plant schedule for
plant species and codes.

7. TREE PLANTING LOCATION NOTES:

LOCATE TREES GENERALLY IN ACCORDANCE WITH LOCAL AUTHORITY
STANDARDS.

- Aminimum 2.0 metres from driveway cross over.

- Aminimum of 1.0 metre from all services to prevent root/service conflict and to provide
future ease of maintenance requirements.

- Aminimum of 2.0 metres from stormwater catchment pits.

-Aminimum of 4.0 metres from street lights.

-Aminimum of 1.0 metre from kerbs and pavement edges.

- Aminimum of 6.0 metres from electricity poles and pillars.

- Not within sewerage easements or other service infrastructure easements.

- Street trees must be located a minimum of 750mm behind the kerb. Street tree
locations subject to set out on site.

TREE REQUIREMENTS.

- Generally all trees shall have a minimum of 1.2 metre clear trunk unless otherwise
specified.

- Tree stocks 45ltr and above to have 2 hardwood stakes as per detail or unless
otherwise specified.

- All tree stock within the landscape works must comply with NATSPEC guidelines, refer
specification.

8. MOWING EDGES:

Refer Materials Schedule on CD-001 and to Details on CD-200.

9. FENCES:

All fences and footings to be located within private property. All in-ground timber to be
F17 H4. Where new fences are indicated on the drawings, existing fences are to be
demolished, unless otherwise noted. Refer Materials and Finishes Schedule for fence
types. Refer plans for locations and refer CD-200 for Details. Set out to be determined on
site with Landscape Superintendent.

10. SERVICES:

The location of all underground or overhead services services shown on these drawings
are indicative only. They have been incorporated at the design or Council approval stage
for general information. The Landscape Contractor shall be responsible for liaising with
the Head Contractor to determine the 'As constructed! location of all water, sewer,
stormwater, electrical, communication or other existing services before commencing any
excavation works.

11. DRAINAGE

Refer Civil Engineers drawings for main storm water drainage. Subsoil drainage lines and
field inlet gullies within landscape areas as shown on landscape drawings. Ensure
positive fall of subsoil pipe to stormwater pits / outlet.

12. HYDRAULICS:

Refer Hydraulic Engineers drawings for locations of all fire hydrants, hosecocks, water
meters and other water infrastructure. All to be coordinated prior to construction. 1
hosecock to be provided in each private courtyard.

13. SEDIMENT AND EROSION CONTROL:

Refer Civil Engineers drawings for all sediment and erosion control measures.

14. ESTABLISHMENT & MAINTENANCE:

All landscape works to include 12 weeks establishment (with exception of works
completed within the months of June / July where an additional 4 weeks establishment
period is required to ensure adequate establishment of stock). Maintenance and Defects
period to be 12 months on all trees (25It and over) and hardscape works.

GENERAL PLANTING NOTES

1, PLANT QUALITY

All plant stock is to be be to the scheduled nomenclature, well formed, hardened off
nursery stock. They are to be container grown in potting mixture with a healthy root
system and not pot bound. All pots shall be free of weeds and plant stock is to be free
from living insects, pests and disease. All plants are to be fully sun or shade
hardened-off to suit their on-site growing position for a minimum period of 6 weeks.
Ensure sufficient supply of each species shown on the drawings is available to achieve
the required layout and densities, and in the event of supply for replacement stock due
to failure, damage, unhealthy specimens or theft. Prior to plant stock arriving to site, a
nursery inspection including the Landscape Architect and Landscape Contractor is
required. The plant supplier is to ensure all stock (or good selection of stock) is present
during the inspection. It is also recommended that the Landscape Architect is on site to
inspect plant stock and plant set out prior to implementation.

2, IMPLEMENTATION

Ensure all planting procedures result in healthy plant species within the prevailing soil,
climatic and management environment of this project. The following minimum is
expected:

- Excavate a hole for each plant twice the diameter of the rootball and 100mm deeper
than the root ball. Break up the base of the hole to a further depth of 100mm and
loosen the sides of the hole.

- Remove the plant from the container with minimum disturbance to the root ball, place
in final position, ensure it is central and plumb. Ensure the root ball is level with the
finished surface of the soil surrounding the hole or bed.

- Ensure correct placement of fertiliser and/or water retention additive as per
manufacture's specification and requirements.

- Thoroughly water plants immediately after planting and at such times during the
contract period as required. All 45ltr, 300mm, 140mm & TS will require a minimum of
10ltrs of water at the time of planting.

- Backfill with topsoil as specified. Lightly tamp and water thoroughly to eliminate any
air pockets. Ensure that topsoil is not placed over the top of the rootball.

Refer to Details on CD-200 as reference.

Collect all empty plant containers daily during planting operations and remove from
site.

Do not vary the plant locations from those specified on the drawings unless otherwise
directed by the Superintendent. Should it be necessary to vary the locations and
spacing for any reason, immediately apply for directions by the Superintendent.

3. PLANT ESTABLISHMENT

The Establishment Period commences at the date of Practical Completion of Works.
During the Establishment Period maintain best horticultural practices, as well as
rectifying defects that become apparent in the works under normal use including (but
not limited to) the following items where required: watering, weeding, fertilising, pest
and disease control, mulching, pruning, rubbish removal and keeping the site neat and
tidy.

4, PLANT REPLACEMENT

Replace failed or damaged plants. This does not include vandalised or stolen plant
material - this will be replaced prior to practical completion.

5. SITE SOILS

All soils are to comply with AS 4419 Table 1 (both site topsoil and imported topsoil) and
receive appropriate amelioration if required. All topsoil must be free from noxious
weeds, rocks, roots, rubbish or any other deleterious material.

Place all topsoil in the areas directed and specified. Ensure that the topsoil is spread
and graded evenly to prevent any ponding. Prevent excess compaction by construction
plant. Stripped site topsoil needs to be stored in piles no greater than 2m high x 3m
wide. Topsoil storage piles for storage greater than 4 months should be seeded with a
suitable grass mix. Eradicate weeds using environmentally acceptable methods, such
as a non-residual glyphosate herbicide in any of its registered formulae, at the
manufacturer's recommended maximum rate. Noxious weeds need to be screened out
of the topsoil prior to placement.

6. MULCH

All mulch is to be free of deleterious or extraneous matter such as soil, weeds, rocks,
and twigs. The finish level of the mulch is to be level with the finish level of all adjacent
surfaces after settlement allowances of the topsoil and mulch. Ensure all mulch is
placed clear of plant stems to avoid rotting at ground level.

7. IRRIGATION
A irrigation system will comprise of a sub-surface dripper system. Refer to Hydraulic for
connection to potable or tank sources.

 

 

 

  

DRAWING SCHEDULE

COVER SHEET
EXTERNAL WORKS PLAN / PLANTING PLAN
CONSTRUCTION DETAILS

14073 CD-001
14073 CD-002
14073 CD-200

Note:
Refer Cover Sheet for legend.

A APPROVAL 2014-07-03 JC GT
ISSUE AMENDMENT DATE DRWN CHKD

COPYRIGHT

THE DESIGN ILLUSTRATED IN THESE DOCUMENTS IS THE EXCLUSIVE PROPERTY
OF DILLON FOLKER STEPHENS PTY. LTD. ACN 095 884 129 AND MUST NOT BE
REPRODUCED, OR USED IN WHOLE OR IN PART WITHOUT THE EXPRESSED
WRITTEN PERMISSION OF DILLON FOLKER STEPHENS,

 

 

 

 

APPROVAL ONLY
NOT FOR CONSTRUCTION

A

DFS GROUP

INTEGRITY : EXCELLENCE » SUCCESS

T 07 5443 5566
F 07 5443 9977

[email protected]
dfs.com.au

TOWN PLANNING
LANDSCAPE ARCHITECTURE

LIQUOR LICENSING
ENVIRONMENTAL

CHECKED

LA
LANDSCAPE ARCHITECT

 

TITLE

Cover Sheet

Notes and Schedules
PROJECT

Proposed Residences
FOR

Tu Projects
AT
28 Nannygai Street Noosaville

SCALE
n/a
DRAWING NO.

CD-001

PROJECT NO

| 14073