Original source · versioned page text
Approved Plans - MCU19-0154 OPW19-0282
Plans and drawings: the text below has words only, no drawings.
Very large file (41.5 MB): may take a few minutes to open.
DATE PLOTTED: 22 July 2019 3:19 PM BY : SAMUEL VANKAN
FOR SIZE SPECIFICATIONS
REFER PLANT SCHEDULE
100mm MULCH AS SPECIFIED REFER TO LANDSCAPE PLAN HESSIAN OR ELASTIC TIES POSITIONED
FOR SPECIES AND POT SIZES MOUND SOIL TO 100mm HIGH TO AT 13 HEIGHT OF TREE. ONE TIE IN A
CREATE WATER HOLDING BASIN FIGURE 8.
TURF AS PER SPECIFIED 200mm IMPORTED TOPSOIL SITE TOPSOIL WITH OVER ROOTBALL - Reduce height of ties progressively to 61
100mm IMPORTED TOPSOIL WATER CRYSTALS AND height of tree during establishment period.
FERTILISER AS SPECIFIED - Remove stakes and ties at the end of
100mm CULTIVATED EXISTING SUBGRADE 100mm CULTIVATED EXISTING
SUBGRADE establishment period.
- Refer to specification
2 No. 50/50 HARDWOOD STAKES.
100
SPADECUT EDGE AS PER 2 X 10g SLOW RELEASE
DETAIL 02/203 FERTILIZER TABLETS
100
1m Ø MULCH RING TO 100mm DEPTH
200
100mm RIPPED SUBGRADE.
EXISTING SUBGRADE TURF AS PER PLAN AND
SPECIFIED. REFER DETAIL 01/200
100
EXCAVATE HOLE 600mm WIDER AND
EXISTING SUBGRADE 300mm DEEPER THAN POT SPECIFIED.
ROOT BALL
BACKFILL HOLE WITH SITE TOPSOIL WITH
FERTILISER AS SPECIFIED. LIGHTLY
COMPACT SOIL UNDER ROOTBALL TO
PREVENT EXCESSIVE SETTLING.
EXISTING SUBGRADE
LD01 TYPICAL TURF LD02 TYPICAL PLANTING 150mm RIPPED SUBGRADE AT
BASE OF HOLE
200 1:10 200 1:10
LD03 TREE IN GARDEN BED
200 1:20
NOTE:
1. REFER TO PLAN, DETAILS AND SPECIFICATION FOR
ADJOINING MATERIAL INFORMATION FIRE BREAK
BOUNDARY
TREATMENT
PRIVATE VARIES
SPADE CUT EDGE LOT
- Leading edge of mulch to 2400 MAX
POWDER-COATED - BLACK 45mm CHS
be flush with adjoining INSTALL DOUBLE TWISTED WIRE REFER TO SPECIFICATION FOR DETAILS
material ACROSS END OF CHAIN WIRE SECTION
250 TYP TO IMPROVE STABILITY OF CHAIN WIRE
600
100
VARIES
IMPORTED TOPSOIL
1200
100
CULTIVATION BLACK POWDER COATED CHAIN
500
MESH ON POST. 50mm X 2.8mm
EXISTING SUBGRADE
100
G.L. G.L.
100
100
150
LD04 SPADED EDGE
CAD File: \\Aubnecfs06\splattst$\splat\2018 Jobs\10 Noosaville Boatshed VIA (BNE job)\Drawings\Current Drawings\LA181001_200.dwg
COMPACTED 20mm DRAINAGE FOOTINGS TO BE CERTIFIED BY
200 1:10 GRAVEL TO THE BASE OF THE ENGINEER
POST. MIN DEPTH OF 150mm
LD05 TYPICAL DETAIL - CHAIN WIRE FENCE
200 1:20
-
APPROVED PLAN
MCU19/0154 & OPW19/0282
NOOSA COUNCIL
18 JUNE 2020
-
XREF's: LA181001_landscape details base
Drawn Date Client
SV 28/02/2019 DEPARTMENT OF HOUSING AND PUBLIC WORKS
0 0.2 0.4 0.6 0.8 1m © Cardno Limited All Rights Reserved. ® Checked Date Project Status
NOOSAVILLE BOAT SHED
This document is produced by Cardno Limited solely for the
TM
Designed
28/02/2019
Date
PRELIMINARY
SCALE 1:10 @A1 benefit of and use by the client in accordance with the NOT TO BE USED FOR CONSTRUCTION PURPOSES
TM 28/02/2019
terms of the retainer. Cardno Limited does not and shall not Scale Size
Verified Date
0 0.5 1 1.5 2m assume any responsibility or liability whatsoever to any third Cardno (Qld) Pty Ltd | ABN 57 051 074 992
Level 11, 515 St Paul’s Terrace
NC Title
LANDSCAPE DETAILS NTS A1
party arising out of any use or reliance by third party on the Approved
Fortitude Valley, QLD 4006 Drawing Number Revision
SCALE 1:20 @A1 content of this document.
A 22/07/2019 FOR OPW APPROVAL TM NC NC Tel: 07 3369 9822 Fax: 07 3369 9722
Rev. Date Description Des. Verif. Appd. Web: www.cardno.com.au NC
LA181001 - 200 A
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.