Original source · versioned page text
Change application_REPORT 29-11-2019_FINAL
Specific Outcome Probable Solution (if code assessment) Comment
cost effectiveness of the network and the provision of Plan; or unchanged from 2013 approval.
public utilities; g) A combination of the principles in these documents;
f) provides for road reserve widths not less than the AUSROADS Guide to Traffic Engineering Practice
minimum identified Section 2.3 of PSP5 Engineering AND was updated in 2015, however design standards
Design Standards – Roads, Drainage and Earthworks; S7.3 The achievement of multiple connections for all roads applicable to this development have not changed.
g) minimises the extent of earthworks required by being and streets (excluding culs-de-sac) within the subdivision
sympathetic to the terrain; and to adjoining subdivisions; AUSTROADS Part 14 Bicycles was updated in
h) has no significant adverse effects on habitat corridors or AND 2017; however, design standards applicable to
areas of significant native vegetation; S7.4 Road networks provide connectivity between this development have not changed.
i) does not create noise attenuation difficulties; residential areas, both internally and to adjoining sites,
j) incorporates pedestrian and cyclist crossings at using access roads MUTCD unchanged from 2013 Approval.
intersections or where required to access high activity AND
nodes and public transport; S7.5 The length of a cul-de-sac does not exceed 200m in It is considered that the layout is compliant with current
k) has regard to the potential for conflict between urban areas and 500m in rural areas; Engineering standards for rural residential development.
vehicles, pedestrians and cyclists; and AND
l) incorporates on-road cycling facilities. S7.6 The layout uses street and road design, including Subsequent Operational Works application is required to
variations in carriageway width, as a traffic calming be lodged and assessed against current local laws and
measure to encourage lower traffic speeds. (Note: policies applying at the time of lodgement.
Carriageway widths are identified in Section 2.3 of PSP5
Engineering Design Standards – Roads, Drainage and
Earthworks.)
AND
S7.7 On-road cycling treatment is utilised to provide safe
and continuous movement of cyclists along a roadway
such as--
a) sealed shoulders;
b) wide kerbside lane;
c) exclusive or peak period bicycle lane;
d) advisory treatments such as Bicycle Awareness Zone;
e) shared parking / bicycle lane;
f) contra flow bicycle lane; or
g) bus/bicycle lane;
AND
JFP Ref: M1775 Page 25
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.