Original source · versioned page text
Attachment A revised plans
Attached to the e-mail Change to DA Revised Plans- 51994.1353.01.
Very large file: it may take a few minutes
The original of this document is very large (15.8 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn GRILL'D
SHOP5/50 HASTINGS STREET, NOOSA HEADS
ISSUE No. 1 2 3 4 5 ISSUE No.
CLIENT CLIENT CLIENT CLIENT
PURPOSE OF ISSUE APPROVAL APPROVAL APPROVAL APPROVAL
COUNCIL PURPOSE OF ISSUE
DATE 10.04.17 03.05.17 24.05.17 31.05.17 17.08.17 DATE
CURRENT CURRENT
DRAWING No. REVISION DRAWING TITLE REVISION STATUS DRAWING No. REVISION DRAWING TITLE REVISION STATUS
DA0000 E ISSUE SHEET A B C D E
DA0001 E FINISHES SCHEDULE - - C D E
DA0002 E LOCATION & SITE PLAN A B C D E
DA0003 E REFERENCE PHOTOS 1/2 - - C D E
DA0004 E REFERENCE PHOTOS 2/2 - - C D E
DA0005 E EXISTING PLAN A B C D E
DA0006 E MATERIALS BOARD - - C D E
DA0101 E LAYOUT PLAN - GROUND FLOOR A B C D E
DA0102 - DELETED - B C D -
DA0111 E LAYOUT PLAN - ROOF - - C D E
DA0112 - DELETED - - C D -
DA0201 E SHOPFRONT ELEVATIONS A B C D E
DA0301 - DELETED - - C D -
DA0401 A RENDER 1/2 - - - - A
DA0402 A RENDER 2/2 - - - - A
client notes E 17.08.17 PL FOR COUNCIL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
D 31.05.17 PL FOR CLIENT APPROVAL DA0000
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
ISSUE SHEET
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or C 24.05.17 PL FOR CLIENT APPROVAL scale NTS @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
B 03.05.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue E
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Very large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.
Full text of the other 11 pages
Page 2
CODE ITEM DESCRIPTION/ FINISH LOCATION SUPPLIER NOTES
CONCRETE BLOCKS BESSER BLOCK CENTER - STEVEN ESTIMATED QUANTITY:
BR1 EL RANCHO SCREEN WALL BREEZE BLOCK. 295 x 295 x 90mm. STANDARD GREY. SCREENS, FACADE, BANQUETTES
(02) 9982 2536 - EL RANCHO:
* QUANTITY FOR REFERENCE ONLY
- ALLOW FOR BREAKAGE
EP1 EPOXY NON-SLIP EPOXY FLOORING WITH R12 RATING, COLOUR - TBC FLOOR - KITCHEN/BAR CONTRACTOR
FA1 GREEN & WHITE STRIPED FABRIC CUSTOM STRIPED FABRIC - TBC UPHOLSTERY MATERIALISED - SAM FENTON SAMPLE TO BE APPROVED BY GIANT
0414 179 938 DESIGN PRIOR TO FABRICATION
BLUE FABRIC CUSTOM FABRIC - TBC AWNING SAMPLE TO BE APPROVED BY GIANT
FA2 TBC
DESIGN PRIOR TO FABRICATION
SILVER MIRROR FINISH
MI MIRROR WALLS WHERE NOTED CONTRACTOR
MIRROR PANELS ON SUITABLE SUBSTRATE, ANGLE TO ALL CORNER JUNCTIONS
ARROW METAL SYSTEMS - GRAHAM SAMPLE TO BE APPROVED BY GIANT
MT1 WELDED WIRE MESH DESIGN SIZE: 100x100MM, WIRE DIAMETER: 6MM WM1001006 SIGNAGE DESIGN PRIOR TO CONSTRUCTION
OLSSON (02) 9748 2200
WALLS & CEILING GENERALLY, KITCHEN
PN1 PAINT - WHITE SOUTHERN ALPES NZ9H1 - TO MATCH PC2 DULUX
PASS THRU BULKHEAD
PN2 PAINT - BLUE BLUE LOBELIA P41E9 - TO MATCH PC4 KITCHEN PASS THRU BULKHEAD DULUX
PC1 POWDERCOAT - BLACK BLACK MATT 260-9129M TABLE BASES & LIGHTBOX SIGNAGE DULUX
PC2 POWDERCOAT - WHITE WHITE SATIN 272-1139S (DLX0315) WHERE AS NOTED DULUX
PC3 POWDERCOAT - GREEN TRANSFORMER GREY GLOSS 984-32186 (DLX1016) TABLE BASES & FURNITURE DULUX
PC4 POWDERCOAT - BLUE INTENSITY STORM SATIN 900-89584 (DLX0317) JOINERY & FURNITURE DULUX
SP1 DELETED
SAMPLE TO BE APPROVED BY GIANT
SP2 STUCCO FINISH ACRA-TEX, ROLL ON, HIGH PROFILE - TBC WALLS THROUGHOUT (UNLESS NOTED) DULUX DESIGN PRIOR TO CONSTRUCTION
SS1 STAINLESS STEEL LINISHED FINISH, COMMERCIAL CATERING GRADE KITCHEN/BAR CONTRACTOR
ECO OUTDOOR - ASHLEY EVANS
ST1 STONE IRREGULAR CRAZY PAVING, 20mm, BLUESTONE FLOORING (02) 8976 2300
ECO OUTDOOR - ASHLEY EVANS
ST2 STONE BLUESTONE PAVERS SHOPFRONT ENTRY STAIRS
(02) 8976 2300
ECO OUTDOOR - ASHLEY EVANS
ST3 STONE FREE FORM, KORORA SHOPFRONT WALLS
(02) 8976 2300
DITO, WHITE, 12x92MM SKHEME - MARYLIN
TL1 TILE- KIT-KAT MOSAIC JOINERY & WALLS AS NOTED
GROUT: MAPEI - 136 ULTRACOLOUR PLUS (OR EQUIVALENT). GROUT LINES TO BE AS MINIMAL AS POSSIBLE 0424 696 624
DITO, TEAL, 12x92MM SKHEME - MARYLIN
TL2 TILE- KIT-KAT MOSAIC JOINERY & WALLS AS NOTED
GROUT: MAPEI - 136 ULTRACOLOUR PLUS (OR EQUIVALENT). GROUT LINES TO BE AS MINIMAL AS POSSIBLE 0424 696 624
BRASS + STONE, CARRARA C, 130 x 130MM, NON-RECTIFIED EDGES, HONED FINISH KITCHEN PASS COUNTER & WALLS AS SKHEME - MARYLIN PLAIN TILES ARE SOLD BY THE
TL3 TILE METRE. MIX TILES (WITH THE
GROUT: MAPEI - 103 ULTRACOLOUR PLUS (OR EQUIVALENT). GROUT LINES TO BE AS MINIMAL AS POSSIBLE NOTED 0424 696 624
BRASS STRIPE) ARE SOLD BY THE
PIECE. CONTRACTOR TO
CONFIRM QUALITIES
JAZZ BLACK GLOSS, 100 X 300MM SKHEME - MARYLIN
TL4 TILE KITCHEN WALLS AS NOTED
GROUT: MAPEI - 103 ULTRACOLOUR PLUS (OR EQUIVALENT). GROUT LINES TO BE AS MINIMAL AS POSSIBLE 0424 696 624
FOR INTERIOR USE. AMERICAN OAK OR TASMANIAN OAK. SEALED WITH MATT POLYURETHANE SEALANT JOINERY WHERE NOTED CONTRACTOR SAMPLE TO BE APPROVED BY GIANT
TM1 TIMBER
DESIGN PRIOR TO CONSTRUCTION
PARAPET FACADE STRUCTURE, PLANTER OUTDURE
TM2 TIMBER COMPOSITE RESORTDECK BOARD, SEA SALT, 138 X 4880MM
BOXES 02 9098 8250
TM3
DELETED
client notes drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
E 17.08.17 PL FOR COUNCIL DA0001
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
FINISHES SCHEDULE
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or
D 31.05.17 PL FOR CLIENT APPROVAL scale NTS @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
C 24.05.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue A
E
Page 3
N
N
SITE LOCATION (SHOWN PINK): NOOSA DRIVE
SHOP 5 / 50 HASTINGS STREET
NOOSA HEADS QLD 4567
TENANCY LOCATION (SHOWN PINK):
SHOP 5 / 50 HASTINGS STREET NOOSA
HEADS QLD 4567
LOCATION PLAN 1.0 SITE PLAN 1.0
NTS - NTS -
client notes E 17.08.17 PL FOR COUNCIL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
D 31.05.17 PL FOR CLIENT APPROVAL DA0002
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
LOCATION & SITE PLAN
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or C 24.05.17 PL FOR CLIENT APPROVAL scale NTS @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
B 03.05.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue E
Page 4
PHOTO ABOVE SHOWS EXISTING SHOPFRONT (NOOSA DRIVE) - FROM WEST PHOTO ABOVE SHOWS EXISTING SHOPFRONT (NOOSA DRIVE) - FROM NORTH
REFERENCE PHOTO 2.0 REFERENCE PHOTO 3.0
NTS - NTS -
client notes drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
E 17.08.17 PL FOR COUNCIL DA0003
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
REFERENCE PHOTOS 1/2
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or
D 31.05.17 PL FOR CLIENT APPROVAL scale NTS @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
C 24.05.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue E
Page 5
PHOTO ABOVE SHOWS EXISTING SHOPFRONT (NOOSA DRIVE) - FROM WEST PHOTO ABOVE SHOWS EXISTING SHOPFRONT - FROM EAST
REFERENCE PHOTO 4.0 REFERENCE PHOTO 5.0
NTS - NTS -
client notes drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
E 17.08.17 PL FOR COUNCIL DA0004
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
REFERENCE PHOTOS 2/2
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or
D 31.05.17 PL FOR CLIENT APPROVAL scale NTS @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
C 24.05.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue E
Page 6
EXISTING WALL EXISTING KITCHEN
DIVIDING TENANCIES - TO BE MODIFIED
SHOP 4 AND SHOP 5
PRO
THROUGH TO EXISTING BIN
PER
STORAGE, TOILETS &
CLEANERS SINK
TY B
OUN
DAR
Y
EXISTING PLANTER &
STONEWORK TO BE RETAINED
KITCH
COOL
ROOM
EN
ER
LOCK
EXISTING GLAZED SLIDING
DOORS TO BE RETAINED LOCK
ER
ER
LOCK
NING
CLEA
P.
EQUI
EXISTING STRUCTURAL
COLUMNS TO BE RETAINED
LOA
DIN
G ZO
NE
UP
BAR AREA
EXISTING CHAIR STORAGE
EXISTING STAIRS AT ENTRY TO TO BE RETAINED
TENANCY TO BE RETAINED
EXISTING BAR TO BE
EXISTING ROLLER SHUTTER REMOVED
TO REMAIN
NOO
EXISTING GAS BOTTLE
STORAGE TO REMAIN
SA
DRIV
PAR
K
ING
E
BAY
EXISTING UMBRELLAS
TO BE REMOVED
SAIL AWNING TO
ADJACENT PROPERTY
TO REMAIN AS IS
FLOOR PLAN 1.0
0 1 2 3M
SCALE 1:100 -
N
client notes E 17.08.17 PL FOR COUNCIL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
D 31.05.17 PL FOR CLIENT APPROVAL DA0005
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
EXISTING PLAN
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or C 24.05.17 PL FOR CLIENT APPROVAL scale 1:100 @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
B 03.05.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue E
Page 7
FA2 FA1 BR1 ST3 PC3 PC2 SP2 TM2
PHOTOS ABOVE SHOWS PROPOSED
BESSER BLOCK (BR1) DESIGN INSTALLED
TL1 TL2 TM1 TL3
REFERENCE PHOTO 4.0
NTS -
TL4 ST1
PHOTO ABOVE SHOWS EXISTING STONEWORK. PROPOSED
STONEWORK (ST3) TO SHOPFRONT IS TO MATCH THE TONE
OF EXISTING
NOTE:
MATERIALS 2.0 REFERENCE PHOTO 3.0
TO BE READ IN CONJUNCTION WITH FINISHES
SCHEDULE (DWG NO. 0001)
NTS - NTS -
client notes drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
E 17.08.17 PL FOR COUNCIL DA0006
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
MATERIALS BOARD
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or
D 31.05.17 PL FOR CLIENT APPROVAL scale NTS @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
C 24.05.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue E
Page 8
83 SEATS
INTERNAL FOH: 25m2
BOH: 38m2
EXTERNAL: 77m2
PRO
THROUGH TO EXISTING BIN
STORAGE, TOILETS &
PER
CLEANERS SINK
TY B
OUN
PREP FRIDGE
DAR
1286W
MENS STAFF
Y
0 TOILET
610x60
HEAT
LOCATION OF EXTERNAL
LAM
FREEZER/FRIDGE CUPBOARDS
460x13
P OV
UB AD
DRAW W
ER
1100
ING
O/H SHELV
TIER
ANDE
2
50
ERS
OL)
LCOH 00
U/B (A FRIDGE
310x12
TOAS
DRINKSW x 650 EXISTING COOLROOM TO
COOL
2015
2.0
0201
BE CONVERTED TO
460x10
EXHA
TE
FRIDGE
DRINKS 650 FREEZER ROOM 4m2
UST
R
3 DR
POS
x
460x13
SECURITY CAGE
1640W
FREE M
HOOD
ROOM
50
ORDER
450x1050
ROO
EXISTING GARDEN TO REMAIN.
OV
POINT / EXISTING STORAGE CUPBOARDS &
50
ER
POS
EXISTING PALM TREE TO BE RETAINED -
BAR LOCKERS TO REMAIN
Z ER
LIVE PLANTS FOR LOW LEVEL PLANTING
460x90
ER
LOCK
COLD
POS
DRES
450mm
INFILL
U/B
BIN
ER
SECURITY CAGE
0
LOCK
STOR W
POS
PROPOSED NEW COOLROOM
S FRID UNDER
1850
460x13
450x1050
LOCATION 4.9m2
AGE
ER
0x1200 LOCK
GE W
PROPOSED NEW COUNTER 31
50
/
NING
LOCATION CLEA
P.
50 EQUI
310x13 SECURE DRINKS STORAGE
SECURITY CAGE
O/H OP
450x1050
EN SH
EXISTING GLAZED SLIDING DOORS & SERVICE & BOH AREA TO HAVE
310x12
ELF
ROLLER SHUTTER DOOR TO BE RETAINED. ANTI-SLIP FLOOR TILES WITH
SIGNAGE TO CENTRAL COLUMN - REFER TO MATCHING 100mm HIGH COVING
00
LOA
ELEVATION (DWG NO. 0201) TILES TO WALL AND FLOOR
GAST
JUNCTIONS
. TRAY
DIN
240L
310x10
G ZO
3 DR
FRID
MEAT
EXISTING ENTRY STAIRS TO REMAIN HAND BASIN SET DOWN 50mm
2 TIER O/H SHELVING
50
UB
GE
NE
AND BE RE-FINISHED W/ NEW PAINT FROM BENCH LEVEL.
FINISH AUTOMATIC TAP WITH SOAP &
HWB
UB PR
UP PAPER TOWEL DISPENSER
EP FR
IDGE
EXISTING CHAIR STORAGE
TO REMAIN
DATA
EXHAUST STEAM HOOD
NEW ILLUMINATED MENU MEN
U
OVER
PLINTH - DOUBLE SIDED. TILE
RA
OIL TROLLEYS STORAGE
CK
DW
SAFE
FINISH
3 TIER O/H
3 TIER O/H SHELVING SHELVING 2 TIER O/H SHELVING
EX. CONCRETE SLAB TO BE RECLAD IN
COMPOSITE TIMBER PLANKS (EITHER SIDE OF NEW WALLS TO BE OF SOLID
ENTRY STAIRS). TIMBER CLAD PLANTER CONSTRUCTION. ALL GAPS TO
ADDED TO TOP (LHS ONLY) & TILED PLANTER BE FILLED IN WITH INJECTION
GAS BOTTLES
TIERED BEHIND. LIVE PLANTS TO BE USED. FOAM TO COMPLY WITH FOOD
STANDARD
NOO
BESSER BLOCK BALUSTRADE W/
TIMBER BREAKFAST BAR EXISTING GAS BOTTLE
STORAGE TO REMAIN
SA
PROPOSED NEW TERRACE
DRIV
SEATING
PAR
K
ING
E
BAY
EXISTING SLAB TO REMAIN AND BE
3.0 RE-FINISHED W/ NEW FLOOR PAVING
0201
EXISTING ADJACENT SAIL AWNING TO EXISTING RENDERED NEW IRREGULAR
PROPERTIES GARDEN TO ADJACENT PROPERTY BUILDING FACADE TO STONEWORK TO
REMAIN. NEW LIVE PLANTS TO REMAIN AS IS REMAIN - TO RECEIVE EXISTING WALLS -
INSTALLED NEW PAINT FINISH PROPOSED STONEWORK
TO MATCH EXISTING ON
SITE
NEW BESSER BLOCK
BALUSTRADE W/ COMPOSITE
TIMBER CAPPING TO SIDE FLOOR PLAN 1.0
FACADE. CLEAR BLINDS TO BE
INSTALLED TO ALLOW FOR
0 1 2 3M PROTECTION WHEN WEATHER IS
INCLEMENT SCALE 1:100 -
N
client notes E 17.08.17 PL FOR COUNCIL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
D 31.05.17 PL FOR CLIENT APPROVAL PROPOSED GROUND DA0101
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification. FLOOR PLAN
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or C 24.05.17 PL FOR CLIENT APPROVAL scale 1:100 @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
B 03.05.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue E
Page 9
PRO
PER
TY B
OUN
PREP FRIDGE
DAR
1286W
MENS STAFF
Y
2800mm AFFL HEIGHT OF EX. 610x60
0 TOILET
ROOF AT THIS POINT
460x13
UB AD
DRAW W
1100
ANDE
50
ERS
OL)
LCOH 00
U/B (A FRIDGE
310x12
TOAS
DRINKSW x 650
2015
460x10
TE
FRIDGE
DRINKS 650
R
3 DR
POS
x
460x13
SECURITY CAGE
EXISTING PLANTER ON GROUND 1640W
50
LEVEL SHOWN GREYED FOR
450x1050
REFERENCE
50
POS
ED
PITCH
460x90
ER
ROOF
LOCK EXISTING ROOF TO
COLD
POS
DRES
450mm
INFILL
REMAIN
U/B
BIN
ER
SECURITY CAGE
STOR W
0
POS LOCK
S FRID UNDER
1850
460x13
450x1050
AGE
ER
00 LOCK
GE W
310x12
50
PITCHED
/
ROOF NING
CLEA
P.
50 EQUI
310x13
COMPOSITE TIMBER USED TO CLAD
SECURITY CAGE
NEW SHOPFRONT PORTAL. WHITE
450x1050
LOUVRES SHUTTERS (SHOWN
310x12
DASHED) BETWEEN PORTAL &
AWNING
00
LOA
GAST
DIN
. TRAY
240L
ACCE R
LADD
310x10
G ZO
3 DR
FRID
SS
E
MEAT
50
UB
GE
NE
HWB
UB PR
PROPOSED ILLUMINATED SIGNAGE
UP
TO BE FIXED TO FRONT FACADE -
EP FR
ABOVE ENTRANCE
IDGE
U
MEN
DW
SAFE
RETRACTABLE FABRIC AWNING FIXED TO
FACADE (SHOWN DASHED) - LOGO TO
FRONT FACE. AWNING TO ASSIST WITH
AFTERNOON SUN SHADE TO
RESTAURANT DINING AREA. PROPOSED
AWNING TO ALIGN WITH HEIGHT OF
EXISTING LAGUNA JACKS AWNING
ROLL DOWN CLEAR BLINDS FROM
NOO
ROOF PITCHED UP ROOF PITCHED UP
UNDERSIDE OF AWNING FOR WEATHER TENSILE SHADE SAILS IN
PROTECTION & CLOSURE WHITE SECURED TO UNDESIDE
OF EX. EAVES FOR
ROOF PITCHED UP
WATERTIGHT PROTECTION OF
OUTDOOR SEATING AREA
SA
PROPOSED ILLUMINATED SIGNAGE
TO BE FIXED TO FRONT FACADE -
DRIV
PERPENDICULAR TO PORTAL
PAR
K
ING
E
BAY
EXISTING PLANTER ON GROUND
LEVEL SHOWN GREYED FOR
REFERENCE
FLOOR PLAN 1.0
0 1 2 3M
SCALE 1:100 -
N
client notes E 17.08.17 PL FOR COUNCIL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
D 31.05.17 PL FOR CLIENT APPROVAL DA0111
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
PROPOSED ROOF PLAN
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or C 24.05.17 PL FOR CLIENT APPROVAL scale 1:100 @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
B 03.05.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue E
Page 10
EXISTING BUILDING SHOWN EXISTING GLAZED
GREYED BEYOND FOR REFERENCE SLIDING DOORS
ONLY - TO REMAIN AS IS TO BE RETAINED
PROPOSED ILLUMINATED SIGNAGE
TO BE FIXED TO FACADE - ABOVE
ENTRANCE & PERPENDICULAR TO
PORTAL
TENSILE SHADE SAILS IN
WHITE SECURED TO UNDESIDE
OF EX. EAVES FOR
EX. SIGNAGE WATERTIGHT PROTECTION OF
OUTDOOR SEATING AREA
3550mm AFFL COMPOSITE TIMBER USED TO CLAD
NEW SHOPFRONT PORTAL. WHITE
1085
2950mm AFFL LOUVRES SHUTTERS BETWEEN
EX. SIGNAGE PORTAL & AWNING
1500 RETRACTABLE FABRIC AWNING FIXED TO
2460mm AFFL FACADE - LOGO TO FRONT FACE. ROLL
DOWN CLEAR BLINDS FROM UNDERSIDE OF
H EALT HY B UR G E RS
AWNING
BESSER BLOCK
BALUSTRADE W/
COMPOSITE TIMBER BENCH
FFL
EXISTING GARDEN TO
REMAIN - STONEWORK
EX. STAIRS
PAINTED GREY
SHOPFRONT - WEST ELEVATION 2.0
TO BE RETAINED
SCALE 1:100 0101
EXISTING BUILDING SHOWN PLANTS HUNG NEW ILLUMINATED EX. CONCRETE SLAB TO BE
GREYED BEYOND FOR FROM PORTAL MENU PLINTH - RECLAD IN COMPOSITE TIMBER
REFERENCE ONLY - TO REMAIN DOUBLE SIDED. TILE PLANKS (EITHER SIDE OF
AS IS FINISH ENTRY STAIRS) WITH LIVE
PLANTS IN PLANTERS ON TOP
COMPOSITE TIMBER USED TO CLAD
NEW SHOPFRONT PORTAL. WHITE
LOUVRES SHUTTERS BETWEEN
PORTAL & AWNING
RETRACTABLE FABRIC AWNING FIXED TO
FACADE - LOGO TO FRONT FACE. TENSILE SHADE SAILS IN
AWNING TO ASSIST WITH AFTERNOON WHITE SECURED TO UNDESIDE
SUN SHADE TO RESTAURANT DINING OF EX. EAVES FOR
AREA. PROPOSED AWNING TO ALIGN WATERTIGHT PROTECTION OF
WITH EX. LAGUNA JACKS AWNING OUTDOOR SEATING AREA
820
3550mm AFFL LOUVERS TO ALLOW
VENTILATION INTO SHADED
AREA
820
2950mm AFFL
NEW IRREGULAR STONEWORK TO
2460mm AFFL EXISTING WALLS. STONEWORK TO
MATCH THE TONE OF EX.
STONEWORK - REFER TO DWG NO.
EXISTING GARDEN & STONEWORK TO 0006
REMAIN. EXISTING PALM TREE TO BE
RETAINED - LIVE PLANTS FOR LOW POWDERCOATED STEEL GATE
LEVEL PLANTING TO GAS BOTTLE STORAGE
AREA. GATE TO LOCKABLE.
NEW PAINT FINISH
FFL
NEW ILLUMINATED MENU
SIDE ELEVATION SHOPFRONT - SOUTH ELEVATION 3.0
COMPLETELY
PLINTH - DOUBLE SIDED. OPEN ABOVE
TILE FINISH PROPOSED ILLUMINATED CLEAR BLINDS TO BE NEW BESSER BLOCK EXISTING RENDERED
SIGNAGE TO BE FIXED TO
SEAT HEIGHT
INSTALLED TO ALLOW BALUSTRADE (TO FORM BUILDING FACADE TO SCALE 1:100 0101
FACADE - ABOVE ENTRANCE FOR PROTECTION SEAT BACKREST OF BENCH REMAIN - TO RECEIVE
& PERPENDICULAR TO WHEN WEATHER IS SEAT) W/ COMPOSITE NEW PAINT FINISH
PORTAL INCLEMENT TIMBER CAPPING
client notes E 17.08.17 PL FOR COUNCIL drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
D 31.05.17 PL FOR CLIENT APPROVAL DA0201
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please
ask Giant for clarification.
SHOPFRONT ELEVATIONS
• Any variation from these drawings requires written approval from Giant.
• This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or C 24.05.17 PL FOR CLIENT APPROVAL scale 1:100 @ A3
project construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants SHOP 5/ 50 HASTINGS STREET • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
B 03.05.17 PL FOR CLIENT APPROVAL drawn by PL checked by CW
Surry Hills NSW 2010 NOOSA HEADS • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
T 8045 2950 E [email protected] issue date initials revision details client approval issue E
Page 11
INTERNALLY ILLUMINATED TENSILE SHADE SAILS IN
SIGNAGE ABOVE ENTRANCE WHITE SECURED TO
UNDERSIDE OF EXISTING
EAVES FOR WATERTIGHT
PORTECTION OF OUTDOOR
SEATING AREA
COMPOSITE TIMBER LIGHTBOX SIGN
DECKING USED TO CLAD PERPENDICULAR TO
NEW SHOPFRONT PORTAL PORTAL
WHITE LOUVRE SHUTTERS
BETWEEN PORTAL & FOLD NEIGHBOURING PORTICO
OUT AWNING
FOLD OUT FARBIC AWNING
IN NACY & WHITE WITH
'HEALTHY BURGERS' TEXT
TO FRONT APRON. SIDE ELVATION
COMPLETELY OPEN ABOVE
SEAT HEIGHT (ROLL DOWN
CLEATR BLINDS BETWEEN
EXISTING COLUMN CLAD IN POSTS FOR WEATHER
KIT KAT TILES PROTECTION & CLOSURE
NEW COLUMN TO SUPPORT UPLIGHTING TO PORTAL
PORTAL CLAD TOMATCH
EXISTING
TILE CLAD PLANTER BOX TO
SIT ON EXISTING SLAB
EXISTING STONE CLADDING
TO PLANTER TO BE
MATCHED WTIHIN FIT OUT
FOR WALL CLADDING NEIGHBOURS PLANTER BOX
ROLL DOWN CLEAR BLINDS DOUBLE SIDED MENU OPEN CIRCULAR BREEZE
FROM UNDERSIDE OF PYLON CLAD IN WHITE KIT BLOCK BALLUSTRADE
AWNING FOR WEATHER KAT TILES, LIGHT BOX MENU BEHIND PLANTER WITH
PROTECTIONS AND RECESSED WITHIN TIMBER BREAKFAST BAR &
CLOSURE GARDEN LIGHTING
EXISTING CONCRETE SLAB EXISTING STAIRS PAINTED
RECLAD IN COMPOSITE CHARCOAL GREY
TIMBER PLANKS COMPOSITE TIMBER CLAD
(WEATHERED GREY) WITH SLAB
TIMBER CLAD PLANTER
ADDED TO TOP & TILED
PLANTER TIERED BEHIND
client notes drawing drawing no.
GRILL'D • All works to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements.
DA0401
• Do not scale this drawing. All dimensions to be verified on site prior to construction. Any inconsistencies to be reported to Giant immediately. If in doubt please RENDER 1
ask Giant for clarification.
• Any variation from these drawings requires written approval from Giant.
project • This drawing has been produced to illustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or scale NA @ A3
construction. Contractor to confirm structural integrity, stability and feasibility of all units/components prior to manufacture.
Design Consultants NOOSA • Contractor to liaise with third party suppliers to confirm exact requirements, including electrical, data, comms & hydraulic requirements a & access points.
Ground Floor, 3 Little Collins St • Contractor to ensure consistency between similar materials is maintained.
A 17.08.17 CW FOR COUNCIL drawn by CW checked by EK
Surry Hills NSW 2010
SHOP 5 50 HASTINGS ST • Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied,
T 8045 2950 E [email protected] NOOSA HEADS reproduced, retained or disclosed to any unauthorised person either wholly or in part without the prior consent in writing of Giant. All rights reserved
A
issue date initials revision details client approval issue
Page 12
INTERNALLY ILLUMINATED SIGNAGE ABOVE ENTRANCE COMPOSITE TIMBER DECKING USED TO CLAD NEW SHOPFRONT PORTAL WHITE LOUVRE SHUTTERS BETWEEN PORTAL & FOLD OUT AWNING FOLD OUT FARBIC AWNING IN NACY & WHITE WITH "HEALTHY BURGERS' TEXT TO FRONT APRON. EXISTING WALL CLAD IN STONE TO MATCH EXISTING PALM TREE PLANTER EXISTING CONCRETE SLAB RECLAD IN COMPOSITE TIMBER PLANKS (WEATHERED GREY) WITH TIMBER CLAD PLANTER ADDED TO TOP & TILED PLANTER TIERED BEHIND (LIVE PLANTS) DOUBLE SIDED MENU PYLON CLAD IN WHITE KIT KAT TILES, LIGHT BOX MENU RECESSED WITHIN TILE CLAD PLANTER BOX TO SIT ON EXISTING SLAB, (LIVE PLANTS) EXISTING STAIRS PAINTED PLANTS HUNG FROM PORTAL TO SOFTEN FACADE & CREATE TIERED PLANTING CHARCOAL GREY LIGHTBOX SIGN PERPENDICULAR TO PORTAL NEIGHBOURING PORTICO TENSILE SHADE SAILS IN WHITE SECURED TO. UNDERSIDE OF EXISTING EAVES FOR WATERTIGHT PORTECTION OF OUTDOOR SEATING AREA TENSILE SAILS LOWER EDGE SECURED AT THIS HEIGHT BEHIND TIMBER CLAD PARAPET ROLL DOWN CLEAR BLINDS BETWEEN POSTS FOR WEATHER PROTECTION & CLOSURE, LOUVERS ABOVE ALLOW VENTILATION INTO SHADED AREA & ADD ‘NOOSA LOOK AND FEEL’ SIDE ELVATION COMPLETELY OPEN ABOVE BACKREST OF SEAT HEIGHT BETWEEN POSTS OPEN CIRCULAR BREEZE BLOCK BALLUSTRADE FORMS BACKREST OF BENCH SEAT NEIGHBOURS PLANTER BOX TILE CLAD PLANTER BOX TO SIT ON EXISTING SLAB giant Design Consultants Ground Ficor, 3 Little Collins St Surry Hilis NSW 2010 T 8045 2950 E studio@giantdesign .com client GRILL'D project NOOSA SHOP 5 50 HASTINGS ST NOOSA HEADS notes = Allworks to be in accordance with the Building Code of Australia, Australian standards, statutory regulations and local authority requirements + Do not scale this drawing. All mensions to be veriiad on site prior to construction . Any inconsistencies. to be reported to Giant immediately. If im doubt please ask Giant for clarification ‘+ Any varistion from these drawings requires written approval from Giant ‘= This drawing has been produced to ilustrate design intent. All shop drawings are to be submitted to and sanctioned by Giant prior to manufacture or construction Contractor to confirm structural integrity, stability and feasbilty of all units/components prior to manufacture * Contractor to fase with third party suppliers to confirm exact requirements. including electrical, data, comms & hyckaulic requirements a & access points ‘+ Contractor to ensure consistency between similar materials is maintained ‘© Copyright © Giant. This drawing is the property of Giant, design and copyright are reserved by them. The drawing is issued upon condition it is not copied, reproduced. retained or disclosed to any unauthorised person sither wholly or in pert without the prior consent in writing of Giant. All rights reserved drawing drawing no. RENDER 2 DANO2 scale NA@ AS A 17.08.17 cw FOR COUNCIL drawn by CW checked by issue date initials revision details client approval issue