SUPERSEDED Compiled Plans OPW20/0145.02

4. Fauna Management
  4.1. Occupational Health and Safety

  Before commencement of work on the site all inductions including client, inductions must be
  completed; all onsite requirements outlined in the inductions must always be adhered to. Before
  handling any venomous snakes, you must have completed a Venomous snake relocation coarse
  and an acceptable level of attainment must have been achieved.

     4.1.1. Personal Protective Equipment (PPE)

     The PPE required on site must always be worn. As a minimum long sleeve high visibility work
     shirt, long work pants, hard hat with sun brim, lace up work boots, safety glasses and suitable
     gloves for your planned task are to be worn.

     4.1.2. First Aid

     It is a requirement of your position as a Fauna Handler that you have a current first aid
     certificate and first aid kits have been placed in every vehicle for your use. If working in the
     field and are situated away from your site vehicle you must carry a snake bit kit.

     4.1.3. Working around plant

     Placement
     When working besides plant (Bulldozers and Excavators) a clear line of sight to the machine
     operator is required. For the operator to maintain line of sight it is important to be on the
     correct side of the machine, for excavators this is the left side (operator cabin side). For
     bulldozers, the correct place is on either side, not in front or behind the machine and always
     maintain positive communication with the operators. When vegetation is being felled it is
     important to stand well clear (but still within sight of the operator). If further inspection of a
     tree is required, the operator must be contacted and place the machine in the “safe” position
     (Stationary with the bucket or blade on the ground) before you can approach the tree.

     Clearing zone
     Clearing zone is defined as that area within two tree lengths (50 Meters) from the operating
     machine. This zone is a hazardous area, care must always be taken while working within this
     zone. The clearing zone is where most of the spotter/catcher’s work occurs.

     Communication
     Communication with the plant operator is to be made via hand help UHF radios. Radios must
     always be charged and carried on your person. Clear communication with the operator is
     essential to ensure safety and the required co-operation is achieved. The operator must be
     informed upon the sighting of any wildlife and of your intentions to catch the animal; you
     require positive communication before approaching the machinery.




                                                                                           18 | P a g e