Council archive · source document
Part 17 of 37 Appendix 15 - Groundwater Assessment MCU12/0208
Very large file (60.3 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.
www.ac ss.gs +GILtEHI
SUT1-ERI.AN)
Table 4.4.1 Rising and falling head test results 4.5 Recharge and evaporation
Borehole Permeability (m/s) Table 4.5.1 describes the application of Cooks
GW1 1.98 x 10-7 method to estimate recharge using the
established range of probable rainfall chloride
GW2 1.27 x 10-5
concentrations for the site of 3.01 to 6.1 Omg/L and
GW4 1.25 x 10-6
an average runoff fraction of 0.2. The estimate
GW5 3.32 x 10-6 suggests that average groundwater recharge may
BH20 1.3 x 10-5
vary across the site from -176 to -356mm/year.
This equates to between -10 and -20% of the
BH58 2.31 x 10-3 annual rainfall total.
It can be seen from the results that permeability The MEDLI water balance model indicated a
varies across the site from 2.31 x 10-3 in the similar range for recharge, varying between 6%
south-west up to 1.98 x 10-7 in the central portion and 32% of average annual rainfall. In this case, a
of the site.
groundwater recharge level of 300mm/year was
used in the MODFLOW model. This level lies
Table 4.5.1 Recharge estimate (mm/yr)for the within the ranges calculated using Cook’s Method
’bl . f’ f II hi ’d t at’o s and the MEDLI model and was selected during
I Location Groundwater Rainfall CI- mg/L the calibration trials to gave the best fit with
cr mg/L measured groundwater results at the site.
I 3.01 6.10
Groundwater recharge 4.6 Steady-state calibration results
mm/year
A summary of residuals analysis of the steady
GW1 98 43 86
state calibrated versus measured (observed)
GW2 231 18 37 ground water is provided in Table 4.6.1.1.
GW3 36 116 235
The calibrated model was then used to assess
GW4 92 45 92 groundwater levels, flow paths and velocities for
the pre and post developed site.
GW5 218 19 39
GW6 148 28 57
Table 4.6.1.1. Residuals analysis
BH4 13 322 652
Parameter Result
BH9 14 299 605
Number of data points 17
BH23 9 464 941
Number of residuals with non- 17
BH26 28 149 303
zero weight
BH28 13 322 652
Residual mean -0.281 m
BH40 25 167 339
Absolute residual mean 0.34m
BH43 22 190 385
Maximum weighted residual -1.196m (GW4)
BH45 16 261 529
Minimum weighted residual -0.014m
BH48 40 105 212 (BH43A)
BH65 16 261 529 Normalised root mean 5.244%
176 356 squared
Average
Standard error of weighted 0.079m
Percent of average
residuals
annual rainfall using 10% 20%
Cooks Method Correlation coefficient 0.993
24 AGRICULTURE WATER ENVIRONMENT
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Part 17 of 37 Appendix 15 - Groundwater Assessment MCU12/0208Related documentApplication case desk ↗
About this file
- File size
- 60.3 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.