Minor Change Existing Approval - MCU17 0024 03 (As Publihed) · MCU17/0024.03

                      The following plans require amendment.

                        Plan No.         Re    Plan/Document Name                                        Date
                                         v.

                        SD-01            1     ROOF CLOSURE CONCEPT – PAGE 01                            JULY 22

                        SD-03            -     ROOF CLOSURE CONCEPT – PAGE 03 – JULY 22
                                               SECTION

                        Amendments       The envelope of the proposed roof is shown outside the site/ lease area
                                         and is not approved.
                                         Provide an amended plan and section which shows the roof within the
                                         site /lease area.

                      *(Refer to Advisory Note)
                      Building Height
               3.     The maximum height of the development must not exceed 11 metres above the finished
                      ground level and the natural ground level.
               4.     Certification must be submitted to Council from a Licensed Surveyor which certifies that the
                      building does not exceed the maximum height requirement of this Decision Notice.
                      Performance Bond
               5.     Security in the form of a cash bond or trading bank guarantee to the sum of $15,000 must
                      be submitted to Council, to secure performance of all conditions of this approval, prior to the
                      issue of a Development Permit for Operational Works. The cash bond or trading bank
                      guarantee will be returned on performance of the conditions of approval less any costs
                      incurred by Council in respect of enforcing performance of this permit. Council reserves the
                      right to call upon the bond or guaranteed sum to effect compliance with conditions.
                      Building appearance
               6.     Roof materials must be non-reflective and the building must be finished with muted earth
                      tones to minimise the visual impact of the development and blend in with the sites natural
                      setting, and be in accordance approved plan 4001 & 4002 Revision A, drawn by Andrew
                      Bock, dated February 2017.
               7.     The building must be finished in a mix of light-weight materials reflective of the sites natural
                      setting and be in accordance with approved plan 4002 Revision A, drawn by Andrew Bock,
                      dated February 2017.
                      NOISE
               8.     All amplified noise at the premises must be conducted through a sound limiting device at all
                      times to ensure that noise does not exceed the Office of Liquor and Gaming Liquor Licence
                      noise limits for the premises.
               9.     The sound limiting device is to have a locking mechanism, which is to be locked at all times
                      except for inspection or maintenance work on the device.
               10.    Access to the sound limiting device, except for maintenance work, is restricted to the
                      licensee, nominee and the person in charge of the premises at the time.
               11.    The sound limiting device must be checked and if necessary calibrated by a qualified acoustic
                      engineer at least every 12 months to ensure compliance with the conditions of the license.
                      Evidence of the sound limiting device calibration must be made available to an investigator
                      or police on request.




                                                                                                       Page 4 of 10
Document Set ID: 24552745
Version: 6, Version Date: 25/02/2026