Skip to the record
Noosa's #1 Council Tracker.

Council archive · source document

Decision Notice [As Published] · 142006.530

of 6

Text shows just the words. Original shows the document exactly as it was published.

NOOSA COUNCIL IDAS Development Application Decision Notice                                                         3




                                       Noosa Council Conditions
                                       INTEGRATED PLANNING ACT 1997, IDAS DEVELOPMENT APPLICATION


1.     Approved plan/s comprise drawings 06/33-1 and 06/33-2 prepared by John Norden and Associates and
       dated February 2006 and drawing D15 prepared by Superior Jetty Constructions dated 19/05/03. Copies
       are attached.

2.     Structures should be designed and constructed such that they are free standing within the waterway and
       are not connected to or behind the revetment wall.

3.     Jetties should have a level-walking surface of R.L 1.000 A.H.D or be level with the top of the revetment
       wall.

4.     A rigid handrail shall be fitted on one side of the walkway.

5.     No posts or vertical supports of the proposed jetty are to extend vertically from the structure unless they
       provide support for the handrail.

6.     The boat lifting devices are to be located in conjunction with the approved jetty and shall not extend
       beyond the end of the approved jetty and with an overall width no greater than 4.0m.

7.     The boat lifting devices are to be fixed to the approved jetty as such they form part of the structure and
       generally perpendicular to the revetment wall.

8.     There shall be no electrical reticulation system carrying electricity in excess of 24 volts beyond the
       revetment wall.

9.     Rock scour protection, wrapped in geotextile, extends 3000 mm from the face of the revetment wall in this
       locality. Prior to driving piles, the rocks are to be removed to expose the geotextile and the geotextile cut
       neatly to allow it to be turned back. During pile driving, care is to be taken to ensure the geotextile is not
       damaged. At the completion of pile driving, the fabric is to be turned down around the pile and the rocks
       replaced around the piles.

10.    The jetty is to be used for private purposes only with no commercial operations to be undertaken.

11.    Boat repair activities will not be permitted on site.

12.    Wastewater and sullage shall only be disposed of at approved pumpout facilities.

13.    The mooring facility shall not be utilised for live-aboard purposes.

14.    Any construction and post construction activity is not to impact on the condition of the waterway, and is to
       be conducted so as not to breach the Environmental Protection Act EPA (1994) and the Environmental
       Protection (Water) Policy 1997.

15.    The approval or conditions do not constitute a ruling on structural safety and the applicant must make
       their own arrangement to ensure adequacy of design and work. Also any approval granted does not
       warrant that such plans and specifications have been checked in detail, nor does not warrant that such
       plans and specifications have been checked in detail, nor does it absolve the owner of the land from
       complying with all the conditions of this approval and/or relevant Council By-Laws and Policies and/or
       relevant statues and/or statutory regulations in the execution and/or performance of said works. The
       Council does not accept any responsibility for the accuracy of such plans

16.    Certification by a Registered Professional Engineer of Queensland that states that the jetty and boat lift
       are constructed in accordance with best practice methods and are structurally sound shall be submitted to
       Council prior to the return of any bond monies held by Council. A final inspection and approval of the
       structures by Council’s Inspector is also required prior to the return of any bond monies held by Council.
       Please contact Council’s Land Development Section to arrange the inspection.

17.    Lighting associated with the use is designer, installed, operated and maintained in accordance with
       Section 3 AS4282 The Control of the Obtrusive Effects of Outdoor Lighting.



J c:\docume~1\jpalmer\locals~1\temp\bcl technologies\easypdf 5\@bcl@0c028582\@[email protected]

Used in these records

About this file

File size
26 KB (small file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Decision Notice [As Published].pdf · 26 KB (small file)

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.