Council archive · source document
08/0890 - MCU - Retail Business - Type 2 - Shop & Salon [As Published] · 132008.890
Ken Hicks & Associates Specific Outcomes 14.18 Amenity _ _ deed] delay May 2008 Proposal Noise 03 Development is designed and sited to avoid Noise emissions that unreasonably diminish the amenity of the area or surrounding uses. No solution provided Complies — The development will not result in any adverse noise emissions. Mechanical plant and equipment and storage areas 04 Mechanical plant and equipment (including air conditioning equipment) and storage areas are designed and located to— a) avoid adverse visual impacts when viewed from the street and adjoining Properties; and b) visually integrate with the building design. $4.1 Mechanical plant and equipment are— 8) located more than 2m from any property boundary; b) where located at ground level, screened by fencing 1.5m in height or dense vegetation of at least 1.5m in width incorporating grouped trees and shrubs with maximum separation distance of 1m measured from the centre of the tree or scrub; and ¢) are visually integrated into the line and plane of the building and roof design and do not project beyond the height or width of the building when viewed from the street and adjoining properties; AND $4.2 For Industrial business and Retail business Type 3, materials stored outside of a building do not exceed 4m in height or half the height of the on-site buildings whichever is the greater. N/A N/A Safety and security OS All property boundaries are clearly identifiable with public and private spaces Clearly defined, O6 All premises and access routes are clearly identifiable to all persons, particularly emergency services personnel. O7 All building entries are designed to be obvious and easily identifiable. $5.1 Boundaries are identified by such means as - fencing; or changes in surface materials or levels; or landscape treatments. $6.1 All premises are identified by the provision of the street number in a Prominent location, preferably near the site entry, (i.e. on the kerb or letterbox or by signage on the building or site). $7.1 The number of entrances and exits are limited and main building entrances/exits are located at the front of the site, in view of the street. Where this is not possible, due to site or existing building constraints, a well defined path is provided to the entrance/exit; and $7.2 All entrances/exits to buildings, are lit and signed, and signage includes hours of operation; and $7.3 Entrances/exits are located to provide a direct link to driveways and carparking areas; and $7.4 Recessed doorways are avoided where the recess is of sufficient size to conceal a person. Where recessed doorways are unavoidable, measures are used to enhance safety, as follows— a) good lighting installed; b) strategically placed mirrors Complies — site boundaries will be retained as they currently exist. Complies - A street number will be clearly identifiable from the Noosa Drive Frontage. Complies - The main entrances to the building are visible at a street level on Noosa Drive. Complies - All entrances/ exits will be lit, and signed, including hours of operation N/A Complies - There are no recessed doorways proposed or existing. Town Planning Report Material Change of Use — Retail business Type 2 Shop & Salon 15 Noosa Drive, Noosa Heads Page 15
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
08/0890 - MCU - Retail Business - Type 2 - Shop & Salon [As Published]Related documentApplication case desk ↗
About this file
- File size
- 2.9 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.