Council archive · source document
Operational Works Application OPW17-0561 · OPW17/0561
Very large file (26.8 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.
MYLES BALDWIN DESIGN CAVEATS, LIMITATIONS, AND DEFINITIONS The findings of this Tree Protection Plan are based on observations made at the time of inspections prior to this Tree Protection Plan being prepared and from the information contained within plans / documentation provided by the project team of consultants. The Tree Protection Plan reflects the subject trees as found on the day of inspection. There is no warranty or guarantee, expressed or implied, that problems or deficiencies with the site or the subject trees may not arise in the future. Any changes to the developmen proposal or tree management works beyond those recommended in this Tree Protection Plan may alter the findings and recommendations of the Tree Protection Plan. The methodology used in this Tree Protection Plan follows the procedures detailed in Australian Standard: AS 4970—2009 Protection Of Trees On Development Sites. This Tree Protection Plan also references the British Standard BS: 5837 (2005) Trees In Relation To Construction - Recommendaiions. The references used in this Tree Protection Plan provides the following information: Tree species - botanical and common name, referenced on plan with a corresponding number. D8H — Diameter at breast height (mm) SRZ - Structural Root Zone radius (m) TPZ ~ Tree protection Zone radius (m} DBH (Diameter at Breast Height) - Stem /trunk diameter measured at 1.4m above ground level. On sloping ground, measuremenis will be taken at the mid slope point at the base of the tree. Where a tree stem / trunk begins to branch at a point that is less than 1.4m above ground, a combined siem diameter is calculated using the formula: Tofal DBH = ¥ DBH2+ DBH2 + DBH2 SRZ (Structural Root Zone) — The area around the base of a tree required for the tree's stability in the ground. The woody root growth and soil cohesions in this area are necessary to hold the tree upright. The SRZ is nominally circular with the trunk at its centre and is expressed by ifs radius in metres. TPZ (Tree Protection Zone} ~ A specified area above and below ground and at a given distance from the trunk set aside for the protection of a tree's roots and crown to provide for the viability and stability of a tree to be retained where it is potentially subject to damage by development. 12 PARK ROAD 1A / 357 ~ 359 Cleveland Street, Redfern, NSW, 2016 | PH +61 29699 2622 NOOSA HEADS [email protected] | www.mylesbaidwin.com | ABN 68 139 176 328
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Operational Works Application OPW17-0561.pdfRelated documentApplication case desk ↗
About this file
- File size
- 26.8 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.