2407-41400 SRA Response with conditions

                                                                                                    2407-41400 SRA




Attachment 1—Referral agency conditions
(Under section 56(1)(b)(i) of the Planning Act 2016 the following conditions must be attached to any development
approval relating to this application) (Copies of the documents referenced below are found at Attachment 5)


No.     Conditions                                                                       Condition timing
Material change of use – Function facility
10.9.4.2.4.1 – Material change of use of premise near a state transport corridor—The chief executive
administering the Planning Act 2016 nominates the Director-General of the Department of Transport and
Main Roads to be the enforcement authority for the development to which this development approval
relates for the administration and enforcement of any matter relating to the following condition(s):
1.      (a)   The road access location is to be located at the existing access           (a) At all times.
              location, generally in accordance with the plan titled Site Master
              Plan, prepared by Blackburne Jackson, dated 24 June 2024,                  (b) and (c) Prior to the
              Reference 5785-DA02, Issue 04                                              commencement of use.

        (b)   Road access works must be provided at the road access location
              comprising rural property access.

        (c)   The road access works must be designed and constructed in
              accordance with:
              i.    Department of Transport and Main Roads, Standard
                    Drawing No. 1807, dated 11/2021, Rev B
              ii.   Department of Transport and Main Roads’ Road Planning
                    Design Manual – 2nd Edition, Volume 3 – Guide to Road
                    Design.
2.      (a)   Road works comprising Basic Right Turn (BAR) and Basic Left                Prior to the
              Turn (BAL), must be provided generally in accordance with the              commencement of use
              plan titled Functional Layout Plan, prepared by Morgan
              Consulting Engineers, dated 19 August 2024, Drawing No.
              24080/SK20, Revision C.

        (b)   The road works must be designed and constructed in accordance
              with:
              i.    Department of Transport and Main Roads' Road Planning
                    and Design Manual, 2nd Edition, Volume 3 – Guide to Road
                    Design
              ii. Department of Transport and Main Roads' Supplement to
                    Austroads Guide to Road Design (Parts 3, 4-4C and 6)
              iii. Austroads Design Vehicles and Turning Path Templates
              iv. Queensland Manual of Uniform Traffic Control Devices, Part
                    13: Local Area Traffic Management and AS 1742.13-2009
                    Manual of Uniform Traffic Control Devices – Local Area
                    Traffic Management.
3.      Vegetation removal and benching must be carried out to ensure sight              Prior to the
        visibility from the existing driveway meets SISD 160m to the east and            commencement of use
        SISD 240m to the west, generally in accordance with plan titled Sight            and to be maintained at
        visibility from existing driveway SK01 – Aerial View, dated August               all times.
        2024, prepared by Hayes Traffic Engineering.




State Assessment and Referral Agency                                                                    Page 4 of 7