06/0823 - Applicant's Response to Information Request including Attachments [As Published] · 132006.823

24. Each driveway has a minimum width of 5.5 metres. Long-sections for each basement
carpark entrance are included in Attachment 12. It is noted that all basement entry ways
have been checked in detail and it can be confirmed that all accesses comply with normal
grading and clearance requirements.

25.

25.

it is noted there are some garages/carpark spaces that do not appear to comply with the
manoeuvring requirements of AS.NZS2890.1-2004. The following examples were noted for

non-compliance:-

25.1 The last garage in B Block for unit B-1d;

25.2 The access for D-15a;

25.3 Space 17 under E Block;

25.4 The entry to both E Block and the Health Spa parking;

25.5 Garages for G Block are difficult to reverse out of:

25.6 The dimensions of the “small car’ spaces under K Block are incorrect:

25.7 Entry to carpark spaces 1 and 2 under N Block will require reversing in and
25.8 The access for Q-168a.

The garages and carpark spaces identified in parts 1 to 8 of Item 25 have been reviewed and
the following amendments have been made. It is noted that turning circles for sections 1, 2,
4, 5 and 8 are provided in Attachment 13.

25.1
25.2

25.3

25.4

25.5

25.6

25.7

25.8

A 2 metre reversing bay has been provided and the bins have been shifted north.
Access to C15a (D15a) has been revised to include a reversing bay.

The width of carpark bay 17 under Building D (E) has been widened to increase
manoeuvrability.

A turning circle of 7.5 metres radius has been used to provide access to the
parking area of Building D (E).

The garages associated with Building E (G) have been reduced to a single car
garage.

The width of the ‘small car' spaces under Building G (K) have been revised and
are now compliant.

It is not considered a reasonable request to require all 220 internal spaces
provided on the site to be able to be entered via a forward motion. A 6.8 metre
aisle width has been provided to assist with manoeuvrability (1 metre in excess of
minimum).

It is considered that Council's request refers to the access for Q-186a, rather

than the stated Q-768a. Turning circles included in Attachment 13 demonstrate
the compliance of this space.

Page 16