MCU14/0028 Appendix 3 chicken-meat-guidelines

A 2.3.3       Surface roughness factor S2

The surface roughness factor varies according to the roughness of the land surface between the
meat chicken farm and the relevant feature (closest sensitive land use). The principal elements that
determine surface roughness are vegetation density and surface topography. Recommended values
of surface roughness are provided in Table 3. The values presented in this table are not to be
summed (i.e. only the value for the single category which best represents the site conditions should
be selected).

The roughness factors given in Table 3 assume that the selected roughness is continuous between
the meat chicken farm and the sensitive land use. Where roughness is variable or non-continuous,
judgement should be used in selecting an appropriate composite factor.

The values in Table 3 should be used with care, and a number of qualifications apply to their use. For
sensitive land uses located at larger distances, multiple surface roughness factors may apply over
different sections of the separation distance. In this instance, the surface roughness factor applied
should be selected after considering the relative weighting of the different factors. When selecting
factors based on the presence of vegetation, some consideration should be given to the potential for
the vegetation to be cleared during the life of the meat chicken farm. For example, off-site vegetation
is beyond the control of the meat chicken farm but may be regarded as permanent depending on the
owner of the land (e.g. national park/state forest where no timber harvesting is undertaken).

Table 3 – Values of surface roughness factor S2


          Surface roughness features                                                        Notes        Factor

          Cropland or grass, few trees                                                        1           1.00
          Undulating hills                                                                    2           0.93
          Level wooded country                                                                3           0.85
          Heavy timber                                                                        4           0.77
          Significant hills and valleys                                                       5           0.68

Notes:
1. Open country with few or scattered trees. Topography would be predominantly flat to slightly undulating.
2. Situations where topography consists of continuous rolling, generally low level hills and valleys, but without sharply
    defined ranges, ridges or escarpments (assumes minimal vegetation).
3. Open forest country with tree density not sufficient to provide a continuous canopy but sufficiently dense to influence air
    movement. There would be little or no lower storey vegetation. The density is such that the vegetation can be considered
    as a continuous belt.
4. Generally tall forests with dense timber stands, providing a continuous canopy. There is limited understorey vegetation
    mainly associated with regrowth.
5. Situations where one or more lines of hills sufficiently large enough to influence air movement exist between the relevant
    feature and the meat chicken farm.

A 2.3.4       Terrain weighting factor S3

The terrain weighting factor (S3) relates to the potential for an odour plume to be exaggerated in
particular directions depending on local topography. A variety of terrain weighting factors have
been developed in recent years, based on both modelling (e.g. Pacific Air & Environment (2003c))
and more subjective judgement. Work conducted by PAE Holmes as background to this version of
the formula used more refined model inputs than in past work. The results, taken with other work,


Queensland Guidelines Meat Chicken Farms                                                                            50