Skip to the record
The gold standard in government transparency.

Original source · versioned page text

Code assessment

of 25

Page text shows just the words. Original shows the document exactly as it was published.

  1. the setting of the site      1% AEP (1:100 year ARI) water
     within an urban or           surface levels or where not
     non-urban context;           modelled, above the highest
  2. any              natural     known flood level.
     environmental     values
     present on, or adjoining     AO7.2 Flood immunity for              Can comply with AO7.2
     the site;                    development    areas is not
                                  achieved by filling land below
  3. any     natural  hazards     the 1% AEP (1:100 year ARI)
     affecting the site or        flood level.
     adjoining land such that
     the number of properties     AO7.3 All reconfigured lots on        Not applicable
     or persons at risk is not    land subject to a constraint or       There is sufficient area on each
     increased;                   valuable feature identified on an     lot outside of mapped areas to
  4. the terrain of the land,     overlay map contains a building       accommodate a building.
     minimising the need for      envelope marked on a plan of
     earthworks;                  development that demonstrates
  5. any places of cultural       that there is an area sufficient to
     heritage significance or     accommodate       the    intended
     character areas present      purpose of the lot, that is not
     on, or adjoining the site;   subject to the constraint or
     and                          valuable     feature    or     that
  6. any important landmarks,     appropriately responds to the
     views, vistas or other       constraint or valuable feature.
     areas of high scenic
     quality present on, or       AO7.4 New lots with a site area       Not applicable
     able to be viewed from,      less than 4,000m² in area have        Lot sizes are        greater   than
     the site.                    a slope not exceeding:                4,000m2.
                                     1. 10%          side   slope
Editor’s Note— Development of            (crossfall); or
land affected by constraints         2. 5% lengthwise          slope
shown on overlay maps will be           (longitudinal fall).
subject to overlay codes
                                  AO7.5 Lot boundaries, services,
                                                                        Alternate solution
                                  utilities and roads are aligned to
                                                                        Refer report.
                                  avoid traversing ecologically
                                  important areas and ecological
                                  linkages.

                                  AO7.6 Development does not
                                                                        Complies with AO7.6
                                  result in significant modification
                                  to natural landform or landscape
                                  features including:
                                     1. waterways and drainage
                                          lines;
                                     2. native    vegetation   or
                                        significant     character
                                        trees;
                                     3. understorey vegetation;
                                     4. slope;
Log in to download the original file

Code assessment.pdf · 339 KB (small file)

Searchable page text hides email addresses. Original files are unchanged and may show email addresses.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.