RFI - Klaus Vario Product Data

Performance specification
Description                                                                     Hydraulic system comprising:

Multiparking system for dependent parking of 2 vehicles one on top of the         Hydraulic cylinders
other. The lower vehicle parks directly on the floor plate. The lower vehicle     Magnetic valves
must exit before the platform is lowered.                                         Hydraulic lines
The height of the platform can be flexibly adjusted (including subsequently).     Bolted connections
Upweighting to 2600 kg can be performed retrospectively.                          High-pressure hoses
Dimensions in accordance with the underlying building, width and height di-       Attachments
mensions.
Access to the parking spaces horizontally (installation tolerance ± 1%).        Electrical system comprising:
Vehicle positioning in the upper parking space by positioning aid mounted
on one side (to be adjusted in accordance with the operating instructions).       Operating element (emergency-stop, key, 1 simultaneous key per parking
Control via an operating element with automatic reset by means of simulta-        space)
neous key.                                                                        Junction box on wall valve
Operating element usually installed in front of the support or on the outside     Electrical locking
of the door reveal.                                                               Chain monitoring
Concise instructions at each operating point.
Special dimensions must be observed in buildings with door.                     Hydraulic unit comprising:

                                                                                  Hydraulic unit (low-noise, fitted to bracket and bearing mounted on rub-
Multiparking system comprising:
                                                                                  ber-metal block)
   2 columns with column bases secured to the floor                               Hydraulic oil tank
   (short or long base configuration can be variably selected)                    Oil filling
   2 sliders (with sliding guides secured to the columns)                         Internal gear pump
   1 platform                                                                     Pump holder
   1 mechanical synchronisation system (for synchronised operation of the         Coupling
   hydraulic cylinders when lifting and lowering)                                 Three-phase motor
   1 hydraulic cylinder                                                           Circuit protection (with thermal overload relay and control fuse)
   Dowels, screws, connectors, bolts, etc.                                        Test pressure gauge
   The platforms/parking spaces are continuously accessible.                      Pressure relief valve
                                                                                  Hydraulic hoses (to attenuate noise transmission to the hydraulic pipes)
Platform comprising:

   Platform profiles
   Adjustable positioning aid
   Chamfered ramp
   Side beams
   Crossbeams
   Screws, nuts, washers, spacers, etc.




Product data      SingleVario 2061        584.69.890-012      04/2023      English                                                                  12