RFI - Klaus Vario Product Data

Loading schedule
                  The systems are dowelled into the ground. The drill hole depth in the floor plate is approx. 15 cm, in the walls approx. 12 cm.
                  The floor plate and walls must be from concrete (quality min. C20/25).
                  The dimensions for the bearing points have been rounded. If the precise figures are required, please consult KLAUS Multiparking.

                  Column bases can be variably selected (short or long configuration). Always observe the corresponding forces.


Variant 1 (V1): short column bases




Variant 2 (V2): long column bases




     Parking space load         F1             F2             F3             F4

             2000 kg          + 30.0 kN       + 1.1 kN        - 7.4 kN      ± 1.0 kN
 V1
             2600 kg          + 36.0 kN       + 1.4 kN       + 9.3 kN       ± 1.0 kN
             2000 kg          + 30.0 kN       + 0.5 kN       + 7.7 kN       ± 1.0 kN
 V2
             2600 kg          + 36.0 kN       + 0.7 kN       + 9.8 kN       ± 1.0 kN


 1    Width dimension B1 (see "Width dimension without door", page 6)
 2    The system must be supported on both sides. An additional stand may be installed if there are no walls at the sides. A floor area of 50 x 30 cm is
      required for these stands (concrete quality min. C20/25, drill hole depth approx. 15 cm).
 3    Marking in accordance with DIN ISO 3864 (illustration colour not consistent with DIN ISO 3864)




Product data       SingleVario 2061       584.69.890-012      04/2023      English                                                                     7