Skip to the record
The first. The best. The only NoosaWatch™.

Council archive · source document

OPW16/0150 - Refer to Operational Works Application 1fo2 this scaned incomplete

of 13

Text shows just the words. Original shows the document exactly as it was published.

Check the original when the exact wording matters.

avale: %
sed oT eNpiberanasi Governnrehtand Planning

| 12 JUL 2016
IDAS form 1—Application detailg |

(Sustainable Planning Act 2009 version 4.2 effective 3 August 2015)

 

This form must be used for ALL development applications.

You MUST complete ALL questions that are stated to be a mandatory requirement unless otherwise identified on this
form.

For all development applications, you must:
° complete this form (IDAS form 1—Application details)
e complete any other forms relevant to your application

e provide any mandatory supporting information identified on the forms as being required to accompany your
application.

Attach extra pages if there is insufficient space on this form.

All terms used on this form have the meaning given in the Sustainable Planning Act 2009 (SPA) or the Sustainable
Planning Regulation 2009.

This form and any other IDAS form relevant to your application must be used for development applications relating to
strategic port land and Brisbane core port land under the Transport Infrastructure Act 1994 and airport land under the
Airport Assets (Restructuring and Disposal) Act 2008. Whenever a planning scheme is mentioned, take it to mean land
use plan for the strategic port land, Brisbane core port land or airport land.

PLEASE NOTE: This form is not required to accompany requests for compliance assessment.

 

Mandatory requirements

 

 

 

Applicant details (Note: the applicant is the person responsible for making the application and need not be the owner
of the land. The applicant is responsible for ensuring the information provided on all IDAS application forms is correct.
Any development permit or preliminary approval that may be issued as a consequence of this application will be issued
to the applicant.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Name/s (individual or company name in full) GRAVATT? BROWN

For companies, contact name

Postal address P.©. 20x 89
Suburb NoosA HEADS
State Qzp Postcode 4A<5E ma
Country

Contact phone number O40C0/F/ ZnO

Mobile number (non-mandatory requirement) at

Fax number (non-mandatory requirement) v/, A

 

   

Queensland

 

Government
Full text of the other 12 pages

Page 2

Department of Infrastructure, Local Government and Planning

 

 

2. Location of the premises (Complete Table D and/or Table E as applicable. Identify each lot in a separate row.)

 

 

Table D—Street address and lot on plan for the premises or street address and lot on plan for the land adjoining or
adjacent to the premises (Note: this table is to be used for applications involving taking or interfering with water. )
(Attach a separate schedule if there is insufficient space in this table.)

 

C] Street address and lot on plan (All lots must be listed.)

LI Street address and lot on plan for the land adjoining or adjacent to the premises (Appropriate for
development in water but adjoining or adjacent to land, e.g. jetty, pontoon. All lots must be listed.)

 

 

 

 

 

Street address Lot on plan Local government area
7 HENDERSON ST., SUNSHINE BEACH] description (e.g. Logan, Cairns)
Lot Unit Street Street name and official Post- Lot no. Plan type
no. no. suburb/ locality name code _| and plan no.
i)
ii)
iii) ls

 

 

 

 

 

 

 

Planning scheme details (If the premises involves multiple zones, clearly identify the relevant zone/s for each lot in a
separate row in the below table. Non-mandatory)

 

Lot Applicable zone / precinct Applicable local plan / precinct Applicable overlay/s

 

i)
ii)
il)

 

 

 

 

 

 

 

Table E—Premises coordinates (Appropriate for development in remote areas, over part of a lot or in water not
adjoining or adjacent to land e.g. channel dredging in Moreton Bay.) (Attach a separate schedule if there is insufficient
space in this table.)

 

 

 

Coordinates Zone Datum Local government
(Note: place each set of coordinates in a separaté-row) reference area (if applicable)
Easting Northing Latitude Longitude
[] cGpag4
mL] wess4
| other

 

 

 

 

 

 

 

 

3. Total area of the premises on which the development is proposed (indicate square metres)

 

 

N/A

 

 

4. Current use/s of the premises (e.g. vacant land, house, apartment building, cane farm etc.)

 

 

 

rl /4

 

 

IDAS form 1—Application details

Version 4.2—3 August 2015

Page 3

Department of Infrastructure, Local Government and Planning

 

 

 

 

 

 

 

Table J

Lot on plan description for strategic port land Port authority for the lot

Table K

Name of local government for the tidal area (if applicable) Port authority for the tidal area (if applicable)

 

 

 

 

8. Are there any existing easements on the premises? (e.g. for vehicular access, electricity, overland flow,
water etc)

 

EN [_] Yes—ensure the type, location and dimension of each easement is included in the plans submitted

 

9. Does the proposal include new building work or operational work on the premises? (Including any
services)

 

[}—No C] Yes-—ensure the nature, location and dimension of proposed works are included in plans submitted

 

10. [s the payment of a portable long service leave levy applicable to this application? (Refer to notes at the
end of this form for more information.)

 

No—go to question 12 [] Yes

 

 

11. Has the portable long service leave levy been paid? (Refer to notes at the end of this form for more
information.)

 

 

cee

Yes—complete Table L and submit with this application the yellow local government/private certifier’s copy of the
receipted QLeave form

 

Table L

 

Amount paid Date paid QLeave project number (6 digit number
(dd/mmiyy) starting with A, B, E, L or P)

 

 

 

 

 

 

12. Has the local government agreed to apply a superseded planning scheme to this application under
section 96 of the Sustainable Planning Act 2009?

 

 

[.] No

[_] Yes—please provide details below

 

Name of local government Date of written notice giver PReference number of written notice given
by local government by local government (if applicable)
(dd/mm/yy)

 

 

 

 

 

 

IDAS form 1-—Application details
Version 4 2-3 Auqust 2015

Page 4

Department of Infrastructure, Local Government and Planning

 

Question 12

¢ The portable long service leave levy need not be paid when the application is made, but the Building and
Construction Industry (Portable Long Service Leave) Act 1991 requires the levy to be paid before a development
permit is issued.

* Building and construction industry notification and payment forms are available from any Queensland post office or
agency, on request from QLeave, or can be completed on the QLeave website at www.qleave.qid.gov.au. For
further information contact QLeave on 1800 803 481 or visit www.qleave.qld.gov.au.

Privacy—The information collected in this form will be used by the Department of Infrastructure, Local Government
and Planning (DILGP), assessment manager, referral agency and/or building certifier in accordance with the
processing and assessment of your application. Your personal details should not be disclosed for a purpose outside of
the IDAS process or the provisions about public access to planning and development information in the Sustainable
Planning Act 2009, except where required by legislation (including the Right to Information Act 2009) or as required by
Parliament. This information may be stored in relevant databases. The information collected will be retained as
required by the Public Records Act 2002.

 

OFFICE USE ONLY

 

 

 

 

 

Date received Reference numbers

 

 

NOTIFICATION OF ENGAGEMENT OF A PRIVATE CERTIFIER

 

To Council. | have been engaged as the private certifier for the
building work referred to in this application

 

 

 

 

BSA Certification license Building

Date of engagement | Name number classification/s

 

 

 

 

 

QLEAVE NOTIFICATION AND PAYMENT (For completion by assessment manager or private certifier if
applicable.)

 

Date receipted
form sighted by
assessment
manager

Name of officer
who sighted the
form

QLeave project Amount paid

Description of the work number ($)

Date paid

 

 

 

 

 

 

 

 

 

The Sustainable Planning Act 2009 is administered by the Department of Infrastructure, Local Government and
Planning. This form and all other required application materials should be sent to your assessment manager and any
referral agency.

IDAS form 1—Application deiels
Version 4 o--3 Arqust 2075

Page 5

 

te}

Department of InfraStiictuiré, LogahGovernment ahd Planning

 

  

Building or operati
cheme

(Sustainable Planning Act 2009 version 3.1 effective 3 August 2015)

 

This form must be used for development applications for building work or operational work assessable against a
planning scheme.

You MUST complete ALL questions that are stated to be a mandatory requirement unless otherwise identified on this
form.

For all development applications, you must:
e complete DAS form 1—Application details
e complete any other forms relevant to your application

° provide any mandatory supporting information identified on the forms as being required to accompany your
application.

Attach extra pages if there is insufficient space on this form.

All terms used on this form have the meaning given in the Sustainable Planning Act 2009 (SPA) or the Sustainable
Planning Regulation 2009.

This form must be used for building work or operational work relating on strategic port land and Brisbane core port land
under the Transport Infrastructure Act 1994 and airport land under the Airport Assets (Restructuring and Disposal) Act
2008 that requires assessment against the land use plan for that land. Whenever a planning scheme is mentioned,
take it to mean land use plan for the strategic port land, Brisbane core port land or airport land.

 

Mandatory requirements

 

 

1. What is the nature of the work that requires assessment against a planning scheme? (Tick all applicable

 

 

 

 

boxes.)
[-] Building work—complete Table A oa Operational work—complete Table B
Table A
a) What is the nature of the building work (e.g. building, repairing, altering, underpinning, moving or demolishing a
building)?

 

PRIVEWAY RENEWAL

 

 

 

 

b) Are there any current approvals associated with this application? (e.g. material change of use.)
[7 No []  Yes— provide details below

 

List of approval reference/s Date approved (dd/mm/yy) Date approval lapses (dd/mm/yy)

 

 

 

 

 

 

 

 

 

 

 

 

land
Government

Page 6

Pa

Department of Infrastructure, Local Government and Planning

 

 

A statement about how the proposed development addresses the local [Confirmed
government’s planning schemes and any other planning documents relevant
to the application.

 

 

 

 

 

A statement addressing the relevant part(s) of the State Development [] Confirmed
Assessment Provisions (SDAP). TKt applicable
Applications for building work (including extensions and demolition that is assessable development)
Floor plans drawn to an appropriate scale (1:50, 1:100 or 1:200 are CL] Confirmed
recommended scales) which show the following: lot applicable
e the north point
e the intended use of each area on the floor plan (for commercial, industrial

or mixed use developments only)
e the room layout (for residential development only) with all rooms clearly

labelled
« the existing and the proposed built form (for extensions only)
e the gross floor area of each proposed floor area.
Elevations drawn to an appropriate scale (1:100, 1:200 or 1:500 are C] ‘onfirmed
recommended scales) which show plans of all building elevations and two applicable
facades, clearly labelled to identify orientation (e.g. north elevation).
Plans showing the size, location, proposed site cover, proposed maximum CL] Confirmed

number of storeys, and proposed maximum height above natural ground level ot applicable
of the proposed new building work. Lh PP

 

Plans showing the extent of any demolition that is assessable development. (] confirmed
not applicable

 

Applications for operational work involving earthworks (filling and excavating)

 

Drawings showing: [Confirmed
¢ existing and proposed contours EC] Not applicable

¢ areas to be cut and filled

e the location and level of any permanent survey marks or reference
stations used as datum for the works

e the location of any proposed retaining walls on the relevant land and their
height

e the defined flood level (if applicable)

«the fill level (if applicable).

 

Applications for operational work involving roadworks

 

 

Drawings showing: EJ infirmed
e existing and proposed contours Trt applicable
e the centreline or construction line showing chainages, bearings, offsets if

the construction line is not the centreline of the road and all intersection
points

e information for each curve including tangent point chainages and offsets,
curve radii, arc length, tangent length, superelevation (if applicable) and
curve widening (if applicable)

e kerb lines including kerb radii (where not parallel to centreline) and
tangent point changes (where not parallel to centreline)

edge of pavement where kerb is not constructed
position and extent of channelisation

e location and details of all traffic signs, guideposts, guardrail and other
street furniture

® pavement markings including details on raised pavement markers

 

 

 

 

   

IDAS form 6-~8urlding ar operational work assessable
angeunst & planning s
Version 3. t--F August 2078

Page 7

Department of Infrastructure, Local Government and Planning

 

 

e details of lighting levels. |

 

Applications for operational work involving public utility services

 

Drawings showing: L] Confirmed

e any existing light poles and power poles [et Not applicable
e any existing underground services

e details of proposed services

e ajlteration to existing services.

 

Applications for operational work involving landscaping works

Drawings showing: [_] Contirmed
e the location of proposed plant species Clot applicable

® aplant schedule indicating common and botanical names, pot sizes and
numbers of plants

« planting bed preparation details including topsoil depth, subgrade
preparation, mulch type and depth, type of turf, pebble, paving and garden
edge

the location and type of any existing trees to be retained

construction details of planter boxes, retaining walls and fences

the proposed maintenance period

irrigation system details.

 

 

 

 

 

 

Privacy—Please refer to your assessment manager, referral agency and/or building certifier for further details on the
use of information recorded in this form.

 

OFFICE USE ONLY

 

 

Date received Reference numbers

 

 

 

 

 

 

The Sustainable Planning Act 2009 is administered by the Department of Infrastructure, Local Government and
Planning. This form and all other required application materials should be sent to your assessment manager and any
referral agency.

IDAS form 6-- Buiieling or operational work assessabie
against a plannines sc
Version 3. 1-3 Aucuist 2018

 

 

Page 8

 

 

am Xs sing 134

 

892799135

832799136,

&.
‘SS2789137

 

 

 

 

 

 

 

 

 

as |
Pio | 4neat 4244
41 13/14
Ls
$$2802714
ae |
the map ‘on this plan for the purpose of determining sare /
whether eny particular facts or circumstances exist and Unitywater ee f9sareet4 9 |
(end ls officers and agents) expressly disclaim responsiblity for sny @ q ° |
loss or damage suffered as a result of placing reliance upon this information. |

 

 

 

Page 9

 

Develow cr. Counter
Page 1 of 1
© 12 JUL 2016
Unitywater DIPS Asset Report si
Date:1 1/07/2016 TimE247 PND

 

 

 

No Water Pressure Mains found...

No Recycled Water Pressure Mains found...

No Sewer Pressure Mains found...

 

Asset SubType Material Nominal Pipe Length |USIL DSIL

 

 

 

 

 

 

 

Number Diameter

2533694 naa PVC-U 150 11.6 33.58 33.34
2533695 peace PVC-U 150 52 32.19 31.85
2533697 Retain PVC-U 150 20.5 38.51 33.62
2533723 Retain PVC-U 150 43.4 37.02 34.36
2533864 Retain PVC-U 150 24.7 41.78 41.54
2533866 Retouation PVC-U 150 20.8 41.5 38.6
2533869 Retain PVC-U 150 30.2 34.03 33.66

 

 

 

 

 

 

 

 

 

Number SubT
7

    

M

M
Manhole

srVvICesS

Asset Sub Type |Connection |OB Surface Invert level |HBC 10 Distance

 

 

 

 

Number Type Distance _|level Length

2799134 _|Service UNK No Info 43.8 43.1 No Info 2
2799136 ___|Service UNK No Info 36.2 34.9 No Info 5.9
2799137 Service UNK No Info 42.2 41.3 No Info 10.2

 

 

 

 

 

 

 

 

 

 

No Sewer Connection Points found...

 

This document may not, in whole or part, be copied, photocopied, reproduced or Page 1of1
translated without prior consent from the CEO, Unitywater.
Printed copies are uncontrolled.

Page 10

 

 

 

    

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tos soe me —— —— ——— as ne
| 1 ae LINDSAY CONSULTING {7
| 4 Lu THs ORAWING RERAING/E PROPERTY OF
LINDSAY CONSULTING PTY LTD AND IS FOR
“ THE SOLE USE OF THE CLIENT. NO PART
Beco LL MAY BE USED IN PART OR WHOLE WITHOUT
| PRIOR EXPRESS WRITTEN CONSENT OF
LINDSAY CONSULTING PTY LTD
| ‘ Ow CLIENT AND PROJECT DESCRIPTION
; - GRAHAM BROWN
, Fs PROPOSED DRIVEWAY
| y EB ~Y NO.17 HENDERSON STREET
ws “e SUNSHINE BEACH
| or g | 9 ‘
Lu ae Es
O a Ss g
> | 2° ob‘) DRAWING TITLE
Lu wb i ee DRIVEWAY DESIGN
Q | is a q 4 O
” Saw cuts every 4.5m . ‘ %
WI crs and Key Joints | a ~ SCALES
mw every 3 saw cut. ay Y
9 | 0 1 2 3 4
<4 m
- a LU
FE a Orig. 1100
wo <x OQ
< ws $ z
Lu : SURVEY DATUM
On “yy DRIVEWAY
PS on yy LONGSECTION 1
< i civawey vaca thick - ASSOCIATED CONSULTANTS
Ow SL72 fabric centrally
| New Concrete
driveway 125mm thick.
| SL72 fabric centrally
OO oO oO Existing Neighbouring aan
Existing timber retaining wall to be Timber retaining wall by, « 4 On
replaced with new Blockwork ko 40 ©
retaining wall to builders “Existing-Felstra Ritto— z
specifications and continue out to beHocated-in « J
the footpath. accordanee-with ‘ ‘ 8 [ORAL BSUE 06/07/16
e ist ‘@-SPech eat rons re *
. b . All AHD levels provided are
S | I E P L A N Nove: 5 z existing levels provided by
SCALE 1:100 water ; a, owner.
wel. | 2 +
ALL LEVELS HAVE BEEN PROVIDED BY THE OWNER. ee
16-0884-01 t/a

 

 

 

 

 

Page 11

 

 

Telstra Line- Relocation of
line to Telstra's specifications

SEWER DEPTH
UNKNOWN. TO
BE CONFIRMED.
400mm min cover

TOK 34.83

 

Se

din

 

Tin 40
Footpath

din 6

TL

Tin 4&

125mm THICK CONCRETE
DRIVEWAY, N25

—

roperty \

nl

ALL SERVICES HAVE BEEN LOCATED
BY ALL UNDER GROUND PIPE &
CABKLE LOCATORS AND CONFIRMED
BY RELEVANT SERVICES

1 in 8.7

LINDSAY CONSULTING 7;

Giructural § Gvji Engineers)
7 LT reas avi8

OFF. 20782 PARKER ATREET, MARODYAYOORE PH Sk 792 118

     

 

 

THIS DRAWING REMAINS/THE PROPERTY OF
LINDSAY CONSULTING PTY LTD AND IS FOR
THE SOLE USE OF THE CLIENT. NO PART
MAY BE USED IN PART OR WHOLE WITHOUT
PRIOR EXPRESS WRITTEN CONSENT OF
LINDSAY CONSULTING PTY LTD

 

 

DATUM 30.00

CLIENT AND PROJECT DESCRIPTION
GRAHAM BROWN
PROPOSED DRIVEWAY

NO.17 HENDERSON STREET
SUNSHINE BEACH

 

 

EXIST. LEVEL

DRAWING TITLE
DRIVEWAY SECTIONS

 

 

DRIVE. LEVEL

 

CHAINAGE

00.00 | 34.690 34.690
1.350 |34.864)34.920

 

 

 

1.850 |34.914|35.086

 

2.850 | 35.080) 35.419

 

4.900 | 35.593} 36.100

6.574 | 36.179| 36.293
7.574 | 36.346] 36.408}
10.510 |36.746]36.746

 

15.840] 37.360) 37.360

 

 

 

 

 

LONGITUDINAL SECTION 1
SCALE 1:100

 

SCALES

0 1 2 3 Am
Ld
Orig. 1:100

 

SURVEY DATUM

 

ASSOCIATED CONSULTANTS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REVISION LIST
A [ORIGINAL ISSUE 06/07/16
‘onputer File
1608B4DW.DWG
DRAWING NUMBER SHEET] REV.

16-0884-D2 2|A

 

 

 

 

Page 12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

    
  

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

ALLOWABLE NUMBER AND WIDTH OF RESIDENTIAL DRIVEWAYS rECEND
ee tema oes oe SPECIAL CONDITIONS APPLICABLE (DRIVEWAY PROHIBITED LOCATIONS)
RI 0. i j i
TYPE DESCRIPTION CROSSINGS INVERT w2 BOUNDARY (All driveways subject to relevant council
approval.) NKL nominal kerb line
(wt) (w3) (face of kerb)
4 1 Single garage | 4.0m 3.0m 3.0m Tp Tangent point on NKL
2 2 | Double garage or more | 4.0m 3.0m 5.0m Prohibited locations shown in a
; heavy line, based on AS 2890.1
4 3 Double garage or more 2 4.0m 3.0m 5.0m 1, min 40.0m frontage; : : fyi :
S 2. min 12.0m between two crossings. X The points marked X are either
a“ at the median on a divided road,
4 pours garage eet 1 5.0m 4.0m 6.0m Subject to carport/garage approval. or at the intersection of the main
boundary. propery road centreline and the
y prolongation of the side road NKL
3 5 Duplex with frontage | 5.0m 4.0m 6.0m line on an undivided road.
= 20.0m or less
3
a 6 Duplex with frontage 2 5.0m 4.0m 5.0m min 7.0m between crossings.
greater than 20.0m
| General 4000 verge
Existing/future concrete path Stormwater kerb inlet Typical carpark bay
Dowelled expansion joint 2
Kerb 5 1.0m clear of
Kerb and channel apa refer to RS-065 S local area traffic
_ garage alignment ie management
V // Property boundary 2 devices
°
S|.¢ o 1.0m clearance
| Sle Z = from pit lintel 8
—T < £ Z Z
S P 5 Zz Zz
3 - NOTE: 8
5 1. Services & road furniture will & es
< e not be moved for driveways. TP ° TP ofo 0 fore
A 7 ae 3 2. This drawing to be read in & - e
S S| $ = = conjunction with RS—050. NKL
& a sel tl cae ea ey |i
& Refer sections A+B on fom X ein san ae
S drawing number RS-050 Median Centreline of main road
— th NKL NKL
500 max vertical 4
transition length | |
6.0m 6.0m
Sawcut to allow clean removal | 1500 |
of back of kerb and channel. Existing path to be saw cut and removed
prior to crossing construction COLLECTOR ACCESS
4 ni anak
Existing/future concrete path 12 JUL 2016
refer note 23 on RS-050
rawantin
SETOUT REQUIREMENTS hewanitin DRIVEWAY PROHIBITED LOCATIONS
These drawings have been developed in consultation between the participating Councils.
BEFORE USE, the user shall confirm that the drawing has been adopted by the appropriate Council.
TE OF PUBLIC WORKS ENGINEERING AUSTRALASIA ee
INSTITU W RESIDENTIAL DRIVEWAYS -
B| 06/14 | Review STANDARD DRAWINGS PLAN 1 OF 2 RS—049 B
A| 10/12 | ORIGINAL ISSUE __ A

 

 

 

 

Page 13

 

Kerb WN

 

 

 

 

 

 

 

 

 

 

   
 

 

 

 

 

 

 

 

  

 

% >
HEIGHT ABOVE INVERT] G 9 19 2 3
OF CHANNEL (mm) }|S ae NN 3
Control joint DISTANCE FROM INVERT | o ” o -
0 OF CHANNEL (m) | © T an B 1500, 1500 _, ___ 1500
gl | | Roll over Raragey
1500min Slope may vary | Leaman sinh
- Road surface 3 1500 refer note 13 | 500 refer note 12 in
= Transition Path zone 1
s 1 in 40 tinf 20 |"
Reinforced SL72 fabric min a 1 in 207
Roll under | Garage/
=

 

 

 

 

 

 

 

 

 

 

 

 

Sand blinding layer 50 max

~Galvanised/stainless
steel dowels 400 long
R16 @ 450 centres

 

Saw cut all kerbs to /

allow clean removal of
back of kerb and

——

Control nd

  
 

Control joint
(If required)

 

Carport slab

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BREAKOUT TYPE channel TYPICAL PROFILE DRIVEWAY ACCESS
SECTION A SECTION B
Refer drawing Refer drawing !ewant
RS—049 RS—049 —____

NOTE:

1. All appropriate permits must be obtained from relevant council, specifying crossing type, 13. Path zone width may vary to match existing concrete pathways and verge profiles.
construction materials, location, levels, surface finishes and dimensions, prior to any excavation. Path earthworks adjoining concrete must be well compacted.

2. Alternative materials for construction, other than reinforced concrete, refer to relevant council 14. Earthworks cut and fill batters from edge of driveway or path to natural surface to be
for approval. maximum grade at 1 in 10 and fully turfed prior to council inspection.

3. Crossing to be constructed square to the street alignment, wholly contained within the site 15. Existing path to be longitudinally transitioned to new driveway at a maximum grade of 1 in 10.
frontage from invert of channel to property boundary. 16. Plain concrete surfaces to be heavy broom finished.

4. One access to be constructed per allotment unless otherwise approved by relevant Council. 17. Decorative surfaces are subject to relevant council approval, where approved, to have a Smm

5. To reduce impact on available street parking, consideration is to be given to visitor's and max depth variation in the finished surface profile. All finished surfaces of driveways are to
neighbouring property's parking needs when selecting a crossing location. comply with the requirements of AS/NZS 3661.1 slip resistance of pedestrian surfaces.

6. Crossing to be located clear of existing gully pits. where this cannot be achieved, the gully pit Exposed aggregate finish subject to relevant council approval due to environmental reasons.
and pipework may be relocated at the property owner’s expense, subject to approval of the 18. Expansion joints to be 10mm thick full depth closed cell cross linked polyethylene foam (85 —
relevant council. 150 kg/m), or 8.5mm thick bitumen impregnated compressed granulated corkboard, installation

7. Crossing to be located clear of all service authority's fittings, manholes and pits. Subject to to manufacturers’ instructions. Seal surface of joint with a suitable polyurethane sealant.
relevant Council approval, where this cannot be achieved, existing service pits are to be 19. Concrete surface tolerance to be,*8™™over 3 metre sections.
contained within the area of new driveway, pit surface to match approved driveway finished 20. Concrete to be minimum grade N32 in accordance with AS 1379 and AS 3600.
levels. 21. Concrete construction to comply with the requirements of AS 3600, concrete code.

8. Kerb adaptors and associated roofwater drainage to be located clear of vehicular crossings. 22. Reinforcement fabric to AS 1304, 50 top and edge cover, lap fabric 250.

9. Council will not relocate traffic islands or provide breaks in traffic islands to allow driveway 23. Control joints are to be sealed with a low modulus self priming sealant to the manufacturers
access. specification. refer RS—065.

10. For water sensitive urban design verges, the vehicular crossing is subject to relevant council 24. Formwork and reinforcement shall be in place and inspected and approved by the relevant
design and approval. council prior to placement of concrete.

11. **Driveways must achieve a high point of 250mm above invert of kerb to ensure stormwater is 25. Maintenance of the crossings are the responsibility of the property owner.
contained within the road reserve as per requirement of Q.U.D.M. (Queensland Urban Drainage 26. Drawing to be read in conjunction with RS—049.
manual). This constraint may be varied upon the approval of the relevant Council. 27. Cross fall of existing pavement adjacent to the driveway to be checked. If cross fall exceeds

12. Under special circumstances Council may approve a rising grade of 1:6 max or falling grade 3%, relevant Council will decide if driveway needs to be re-designed to ensure satisfactory
of 1:20 min Longitudinal grades along property boundary must allow for free drainage and clearance for vehicles. .
pedestrian safety. 28. All dimensions are in millimetres unless shown otherwise.

These drawings have been developed in consultation between the participating Councils.
BEFORE USE, the user shall confirm that the drawing has been adopted by the appropriate Council.
E | 06/714 | Review DRIVEWAYS rE |
DI 10/12__| Review
ct 06/10 Rev INSTITUTE OF ee ae. AUSTRALASIA RESIDENTIAL DRIVEWAYS RS-050  {¢
A 05/08 | ORIGINAL ISSUE a PLAN 2 OF 2 iN

 

 

 

 

 

Used in these records

About this file

File size
4.5 MB (large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

OPW16_0150 - Refer to Operational Works Application 1fo2 this scaned incomplete.pdf · 4.5 MB (large file)

The download may take up to a minute.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.