Skip to the record
Every meeting, every word.

Original source · versioned page text

SUPERSEDED Reference Document - MCU22/0202

of 48

Page text shows just the words. Original shows the document exactly as it was published.

Page text read automatically using OCR, there may be inaccuracies

                                                                        Bushfire Hazard Assessment and Management Plan



                potential fireline intensity greater than 4,000 kW/m (i.e. medium, high or very high bushfire
                hazard/potential bushfire intensity). This mapping triggers assessment against the State Planning Policy
                Assessment Benchmarks.

                An excerpt from the SPP Assessment Benchmark – BPA mapping published on the SPP Interactive
                Mapping System (IMS) is provided in Figure 2. The site is mapped as containing areas of Very High
                Potential Bushfire Intensity and Potential Impact Buffer.




                         Figure 2 Excerpt from DSDMIP SPP IMS – Bushfire prone area (Source: DSDMIP SPP IMS).

                2.2 Noosa Plan 2020

                The site is located within the Noosa local government area and is subject to the provisions of the Noosa
                Plan 2020. The planning scheme’s Bushfire hazard overlay maps the site as containing areas of High
                Potential Bushfire Intensity and Potential Impact Buffer. An excerpt from the overlay map identifying the
                mapped bushfire hazard areas in relation to the proposed development site is shown in Figure 3.

                Noosa Shire Council’s Bushfire hazard overlay mapping designates bushfire prone areas for the
                purposes of Section 12 of the Building Regulation 2006. The provisions of the Building Code of Australia
                (BCA) or Queensland Development Code (QDC) are applicable to any building assessment work in a
                designated bushfire prone area.

                The Noosa Plan 2020 Bushfire overlay code notes that a site-based assessment may be used to ground-
                truth the extent of hazardous vegetation and the extent and nature of the bushfire hazard area (bushfire
                prone area), but does not specify acceptable methodologies. The site-specific bushfire assessment




                                                                PR22428_BHAMP_199 Beddington Road, Doonan         Page 6
Document Set ID: 22623753
Version: 1, Version Date: 17/10/2023
Log in to download the original file

SUPERSEDED Reference Document - MCU22_0202.pdf · 4.7 MB (large file)

The download may take up to a minute.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.