SUPERSEDED Reference Document - MCU22/0202

                                                                              Bushfire Hazard Assessment and Management Plan



                 Table 6: Determination of Bushfire Attack Level (BAL) minimum separation distances for bushfire-prone
                                                               vegetation.


                   Bushfire              BAL-
                    Attack              Flame        BAL-40        BAL-29          BAL-19          BAL-12.5         BAL-10
                 Level (BAL)           zone (FZ)


                 East              0 - < 21.7m     21.7 - < 27m   27 - < 35.2m   35.2 - < 44.6m   44.6 - < 50.3m   50.3- <100m


                 South-east        0 - < 19.8m     19.8-< 24.9m   24.9- < 2.6m   32.6 - < 41.6m   41.6 - < 47m     47 - < 100m


                 North-east        0 - < 19.8m     19.8-< 26.2m   26.2-<36.8m    36.8 - < 49.8m   49.8 - < 57.7m   57.7 -<100m


                 South-west        0 - < 26.8m     26.8-< 32.9m   32.9-<42m      42 - < 52.7m     52.7 - < 59.2m   59.2 -<100m




                The ‘QFES BRC Document 2019’ (section 9.4) specifies that vulnerable uses (i.e. Hospices, Age Care
                Facilities, child care etc.) in bushfire prone areas must not be exposed to a radiant heat flux level of
                greater than 10 kW/m2 at all development footprint boundaries. To comply with AO1.2 of the Bushfire
                Overlay Code in the Noosa Plan 2020 the development will be required to maximise the setback from
                hazardous vegetation to achieve an acceptable risk therefore the development is required to have a
                setback from the hazardous vegetation in accordance with the distances in Table 6 above for BAL 10.
                The proposed new building can comply with this requirement.




                                                                   PR22428_BHAMP_199 Beddington Road, Doonan           Page 19
Document Set ID: 22623753
Version: 1, Version Date: 17/10/2023