41SeaviewTce Op Works Form 6 · OPW17/0051

A statement about how the proposed development addresses the local                      Confirmed         Email
government’s planning schemes and any other planning documents relevant
to the application.

        The proposed development complies with all required outcomes
        of Division 15, Table 7.11 of the Noosa Plan (2013), except for
        “O5 – Setbacks” which is the subject of a separate Siting
        Application due to the property’s corner site location.


A statement addressing the relevant part(s) of the State Development                    Confirmed
Assessment Provisions (SDAP).                                                           Not applicable
Applications for building work (including extensions and demolition that is assessable development)
Floor plans drawn to an appropriate scale (1:50, 1:100 or 1:200 are                     Confirmed
recommended scales) which show the following:                                           Not applicable
   the north point
   the intended use of each area on the floor plan (for commercial, industrial
    or mixed use developments only)
   the room layout (for residential development only) with all rooms clearly
    labelled
   the existing and the proposed built form (for extensions only)
   the gross floor area of each proposed floor area.
Elevations drawn to an appropriate scale (1:100, 1:200 or 1:500 are                     Confirmed
recommended scales) which show plans of all building elevations and                     Not applicable
facades, clearly labelled to identify orientation (e.g. north elevation).
Plans showing the size, location, proposed site cover, proposed maximum                 Confirmed
number of storeys, and proposed maximum height above natural ground level               Not applicable
of the proposed new building work.
Plans showing the extent of any demolition that is assessable development.              Confirmed
                                                                                        Not applicable
Applications for operational work involving earthworks (filling and excavating)
Drawings showing:                                                                       Confirmed         Email
 existing and proposed contours                                                        Not applicable
 areas to be cut and filled
 the location and level of any permanent survey marks or reference
    stations used as datum for the works
 the location of any proposed retaining walls on the relevant land and their
    height
 the defined flood level (if applicable)
 the fill level (if applicable).
Applications for operational work involving roadworks
Drawings showing:                                                                       Confirmed
 existing and proposed contours                                                        Not applicable
 the centreline or construction line showing chainages, bearings, offsets if
  the construction line is not the centreline of the road and all intersection
  points
 information for each curve including tangent point chainages and offsets,
  curve radii, arc length, tangent length, superelevation (if applicable) and
  curve widening (if applicable)
 kerb lines including kerb radii (where not parallel to centreline) and

                                                                            IDAS form 6—Building or operational work assessable
                                                                                                     against a planning scheme
                                                                                                    Version 3.1—3 August 2015