Original source · versioned page text
2018-08-07 S&O Agenda - Att 5 to Item 7 - Local Law Amendments
The original of this document is very large (12.1 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Text sections have not been matched to the original PDF pages. Use the original document to check page numbers.
Noosa Shire Council Subordinate Local Law No. 1 (Administration) 2015 59
(b) the gate and/or grid will not unduly obstruct pedestrian or vehicular traffic;
and
(c) the gate and/or grid will not prejudice the safety of pedestrian or vehicular
traffic; and
(d) the gate and/or grid will not prejudice the proper maintenance of the road; and
(e) the matters which are the subject of the conditions specified in section 6(2) of
this schedule which are relevant to the installation of the gate or grid can be
adequately addressed by the imposition of those conditions.
(3) Additional criteria for approvals to carry out work or interfere with the operation of a
road other than (1) and (2) include the following –
(a) the work is required to improve traffic or pedestrian safety; and
(b) the work is required as a result of an emergency situation that must be
resolved as soon as possible.
5 Conditions that must be imposed on approvals
As determined by an authorised person.
6 Conditions that will ordinarily be imposed on approvals
(1) For approvals to install a vehicular access to premises, the conditions that will
ordinarily be imposed on an approval are that the approval holder must ensure that –
(a) if an allotment is located on a corner–the vehicular access to the premises is
not constructed along the arc of the kerb return into the side street; and
Example for paragraph (a) –
A vehicular access to the premises cannot lie between the tangent points of the turnout arc.
(b) the vehicular access to the premises is –
(i) 600 millimetres clear of stormwater drainage and catchpits; and
(ii) 800 millimetres clear of power poles or light poles; and
(b) the vehicular access is not built over hydrants or other services; and
(c) where a vehicular access is built over a service cover, the cover is
altered and reconstructed to the level of the new driveway; and
(e) the vehicular access is constructed in accordance with the engineering
guidelines adopted by the local government.
(2) For approvals to install or operate gates or grids on a road, the conditions that will
ordinarily be imposed are that the approval holder must ensure that –
(a) the gate or grid and the approaches to the gate or grid are erected and/or
installed in accordance with the following requirements –
(i) a grid or gate must be erected/installed –
(A) at locations approved by the local government; and
(B) as directed by the local government; and
(ii) a grid is constructed at a skew of 1 in 12 to the centreline of the road;
and
ECM_20665727_v1_ATTACHMENT 5 (4of 8) - Subordinate Local Law No 1 (Administration) Consolidated
Version.doc722181_1
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalVery large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.