Skip to the record
The definitive source for everything Noosa Council.

Original source · versioned page text

Further information from consultant MCU12/0184

of 40

Page text shows just the words. Original shows the document exactly as it was published.

Page text read automatically using OCR, there may be inaccuracies

Very large file: it may take a few minutes

The original of this document is very large (35.8 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.

    SUMMARY OF MODEL UPDATES TO ADDRESS SCRC TECHNICAL REVIEW
               MATTERS RAISED BY PACIFIC ENVIRONMENT LTO (PEL)


TAPM


       Radius of influence of Nambour observation station set to 5km (as per PEL request)


CALMET


       updated to apply the MM5toGrads algorithm (ICOULD=4)as per request from PEL
       (per email 25 November 2013)
       updated the Radius of Influence of Terrain Features (TERRAD)from 2km to 5km to
       match the range of suitable values in accordance with the NSW CALPUFF Modelling
       Guidance Document


CALPUFF


       WSCALM was set to a value of 0.5m/s (as per PEL request)

       Model representation of poultry shed emissions amended to buoyant point sources
       (as per PEL request), specifically:
          o   16-16.5m source diameter offset 30m from the ventilation end of each shed

          o   Note momentum flux factor set to 0 (rain hat function)

          o   Effective emission velocity calculated for each hour based upon the
              ventilation rate

          o   Emission temperature set in accordance with the Best Practice Guidance for
              the Poultry Industry document

       Set the minimum turbulence velocities (SVMIN)set to 0.2 over land for each stability
       class in accordance with the NSW CALPUFF Modelling Guidance Document

       Set the Probability Density Function (PDF)used for dispersion under convective
       conditions to 1 in accordance with the NSW CALPUFF Modelling Guidance
       Document



       A sensitivity test was undertaken to evaluate the impact of changing SIGZI for 1.5m
       high litter stockpiles from 0.35 to 0.7 for ground level sources (as per review
       requested by PEL). No change in the overall concentrations was identified for the
       discrete receptor model at the sensitive receptors, therefore this was not adopted in
       running the gridded receptors.

EMISSION RATES



       ’K Factor’ of 2.2 applied in accordance with the Best Practice Guidance for the
       Poultry Industry document
       Maximum ventilation rate set at 10m3/hour/bird in accordance with the Best Practice
       Guidance for the Poultry Industry document
Log in to download the original file

Further information from consultant MCU12_0184.pdf · 35.8 MB (very large file)

Very large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.

Searchable page text hides email addresses. Original files are unchanged and may show email addresses.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.