Skip to the record
Noosa’s premier civic archive.

Council archive · source document

Town Planning Report · MCU13/0102

of 26

Text shows just the words. Original shows the document exactly as it was published.

Check the original when the exact wording matters.

 

measured from the facade (face of
building) to the boundary.

Where the boundary alignment is non linear
or irregular, for example corner blocks or cul
de sac, the setback shall be calculated as an
average distance along the length of the
facade (face of the building) or garage
alignment, which ever applies.

Garages shall be setback in line with the
main dwelling facade or behind the main
dwelling facade.

 

Secondary Frontage (corner allotments)
The minimum setback from the secondary
street frontage shall be 3.0m. Windows,
balconies, verandas and screening devices
are to be incorporated into elevations facing
street frontages to articulate building form.
Laundries and clothes-drying facilities are
not to be located along the primary or
secondary street frontage, unless suitable
screening is provided.

Compliant
The proposal is not for a corner allotment.

Notwithstanding this, the proposal includes
perimeter fencing and landscaped treatments.
Further, the proposal contains high quality
building design and materials to articulate the
building form, including the incorporation of
screening devices such as aluminium louvers
on the building facade, refer to Proposal
Plans prepared by AV Jennings located at
Appendix A.

 

Rear Setbacks

The minimum rear building setback shall be
2metres, with minor intrusions permitted for
eaves and the like.

Buildings shall be setback a minimum of 6m
from the Conservation Parkland boundary,
with minor intrusions permitted of eaves and
the like.

Swimming pools, pergolas, low decks and
garden structures shall be setback a
minimum of 2m from the Conservation
Parkland boundary, with minor intrusions
permitted where footings do not adversely
impact on vegetation within the Conservation
Parkland to the reasonable satisfaction of the
Manager Land Use.

Compliant

The proposal includes a 3m_ setback
measured from the rear property boundary to
the building line.

The proposal is not sited adjacent to or abuts
the Conservation Parkland boundary.

 

 

Built to Boundary Walls and_ Side
Setbacks

All lots containing built to boundary walls
shall provide a minimum side setback of 3m
measured for the building fagade to one of
the boundaries to ensure open space is
maintained between each of the dwelling
units.

Where no built to boundary walls are
identified by the building envelope on the lot,
buildings shall be setback a minimum of
1.5m from one side boundary.

The maximum length of Built to Boundary
walls is 8.0m, built within a maximum of 15m
from the front boundary alignment.

The maximum height of a built to boundary

 

Compliant

A 1.5m side setback is provided to the
northern boundary, whist a 6.2m side setback
is provided to the southern boundary tapering
down to 1.3m at the south-western corner of
the site. This is considered to be a minor non-
compliance and applies approximately to 1m
of the wall length.

 

Page 12 of 26

 

Used in these records

About this file

File size
1.3 MB (small file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Town Planning Report.pdf · 1.3 MB (small file)

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.