Skip to the record
Beware of cheap imitations.

Council archive · source document

Town Planning Report · MCU13/0102

of 26

Text shows just the words. Original shows the document exactly as it was published.

Check the original when the exact wording matters.

 

steeping of buildings.

 

Front Setbacks

All lots shall have a minimum front setback of
3 metres, with garages setback a minimum
of 4.5m, with minor intrusions permitted of
eaves, covered entrances and the like.
Where a lesser setback than 5.4m is
proposed to garages:

e Provision shall be given for visitor
parking on the driveway with a
minimum length of 5.4 metres,
measured form the garage and a 3.0
metre separation from the back of
kerb to the rear of a parked vehicle
maintained.

e The sightline requirements to the
footpath shall be maintained in
accordance with AS2890.1-2004, for
vehicles parked on the proposed
driveways.

e Front and side setbacks are to be
measured from the facade (face of
building) to the boundary.

Where the boundary alignment is non linear
or irregular, for example corner blocks or cul
de sac, the setback shall be calculated as an
average distance along the length of the
facade (face of the building) or garage
alignment, which ever applies.

Garages shall be setback in line with the
main dwelling facade or behind the main
dwelling facade.

Compliant

The proposed dwelling is in accordance with
requirements and includes a minimum 4m
setback measured from the footpath to the
front building line, and a 5.5m_ setback
measured from the boundary to the garage.
We confirm that the proposed garage is
setback behind with the main dwelling facade.

 

Secondary Frontage (corner allotments)
The minimum setback from the secondary
street frontage shall be 3.0m. Windows,
balconies, verandas and screening devices
are to be incorporated into elevations facing
street frontages to articulate building form.
Laundries and clothes-drying facilities are
not to be located along the primary or
secondary street frontage, unless suitable
screening is provided.

Compliant
The proposal is not for a corner allotment.

Notwithstanding this, the proposal includes
perimeter fencing and landscaped treatments.
Further, the proposal contains high quality
building design and materials to articulate the
building form, including the incorporation of
screening devices such as aluminium louvers
on the building facade, refer to Proposal
Plans prepared by AV Jennings located at
Appendix A.

 

 

Rear Setbacks

The minimum rear building setback shall be
2metres, with minor intrusions permitted for
eaves and the like.

Buildings shall be setback a minimum of 6m
from the Conservation Parkland boundary,
with minor intrusions permitted of eaves and
the like.

Swimming pools, pergolas, low decks and
garden structures shall be setback a
minimum of 2m from the Conservation
Parkland boundary, with minor intrusions

 

Compliant
The proposal includes a 3.4m_ setback

measured from the rear property boundary to
the building line.

The proposal is not sited adjacent to or abuts
the Conservation Parkland boundary.

 

Page 19 of 26

 

Used in these records

About this file

File size
1.3 MB (small file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Town Planning Report.pdf · 1.3 MB (small file)

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.