MCU14/0028 IDAS Forms 1 & 5

 

 

A statement addressing the relevant part(s) of the State Development
Assessment Provisions (SDAP).

CL] Confirmed
| Not applicable

 

When the application involves the reuse of existing buildings

 

Plans showing the size, location, existing floor area, existing site cover,
existing maximum number of storeys and existing maximum height above
natural ground level of the buildings to be reused.

C Confirmed
C] Not applicable

 

When the application involves new building work (including extensions)

 

Floor plans drawn to an appropriate scale (1:50, 1:100 or 1:200 are
recommended scales) which show the following:
e the north point

* the intended use of each area on the floor plan (for commercial, industrial
or mixed use developments only)

© the room layout (for residential development only) with all rooms clearly
labelled
the existing and the proposed built form (for extensions only)
the gross floor area of each proposed floor area.

Cl Confirmed

 

Elevations drawn to an appropriate scale (1:100, 1:200 or 1:500 are
recommended scales) which show plans of all building elevations and
facades, clearly labelled to identify orientation (e.g. north elevation)

Cl Confirmed

 

Plans showing the size, location, proposed site cover, proposed maximum
number of storeys, and proposed maximum height above natural ground level
of the proposed new building work.

C] Confirmed
[_] Not applicable

 

When the application involves reuse of other existing work

 

Plans showing the nature, location, number of on-site car parking bays,
existing area of landscaping, existing type of vehicular cross-over (non-
residential uses), and existing type of vehicular servicing arrangement (non-
residential uses) of the work to be reused.

C] Confirmed
C] Not applicable

 

When the application involves new operational work

 

Plans showing the nature, location, number of new on-site car parking bays,
proposed area of new landscaping, proposed type of new vehicle cross-over
(non-residential uses), proposed maximum new vehicular servicing
arrangement (non-residential uses) of the proposed new operational work.

 

 

LI Confirmed
CL] Not applicable

 

 

 

Privacy—Please refer to your assessment manager, referral agency and/or building certifier for further details on the

use of information recorded in this form.

 

OFFICE USE ONLY

 

 

Date received Reference numbers

 

 

 

 

 

 

The Sustainable Planning Act 2009 is administered by the Department of State Development, Infrastructure and

Planning. This form and all other required application materials should be sent to your assessment manager and any

referral agency.

Department of State Development, Infrastructure and Planning
PO Box 15009 City East Qld 4002

tel 13 QGOV (13 74 68)

IDAS form 5—Material change of use assessable
[email protected]

against a planning scheme

www.dsdip.qld.gov.au Version 3.0—1 July 2013