Original source · versioned page text
Approved Plans - MCU6/-0088
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawnNOTE - CONSTRUCTION:
ROOM SCHEDULE
ALL CONSTRUCTION SHALL COMPLY WITH
THE BCA / NCC VOLUME 1 FOR CLASS 2-9 APPROVED PLANS NAME AREA
BUILDINGS
ALL DETAILS TO BE READ IN CONJUNCTION
MCU16/0088 INTERNAL DINING
GELATO DINING
11.1 m²
19.5 m²
WITH SPECIFICATION, ARCHITECTURAL
DRAWINGS, SCHEDULES & CONSULTANT NOOSA COUNCIL MAIN DINING
GELATO QUEUE
28 m²
7.4 m²
20 OCTOBER 2016
DRAWINGS MAIN QUEUE 14.3 m²
ENTRY 10.1 m²
BUILDER TO CONFIRM THE SET OUT AND
ALL LEVELS AND DIMENSIONS ON SITE MAIN SERVICE 10.1 m²
2 GELATO SERVICE 10.2 m²
PRIOR TO THE COMMENCEMENT OF THE
BUILDING WORKS WD.50 NEW R12 NON-SLIP VINYL KITCHEN 21.4 m²
FLOORING - COVED AT ALL WASHLINE 6.4 m²
ALL SIZES TO BE CONFIRMED ON SITE TERMITE BARRIER TO ALL SLAB
VERTICAL JUNCTIONS STORE / HALL 10.3 m²
PRIOR TO THE FABRICATION OF ANY ITEM TRENCHES / PENETRATIONS
BUILT 'OFF SITE' GELATO CLEANING 5.2 m²
7 QUEUE HALL 25.7 m²
7 m² 450 X 25mm WHITE DECORWOOD ALL EXITS TO NCC SECTION E
THE SIZES AND SPECIFICATIONS OF ALL SHELVES ON WALL MOUNT STRIP PART 4 AND AS2293 COLD ROOM 3.6 m²
EQUIPMENT TO BE CONFIRMED BY BRACKETS EXTENDED COLD ROOM 2.9 m²
ELECTRICIAN, PLUMBER, JOINER AND GELATO 6 WD.40
FREEZER 6.3 m²
BUILDER DINING
20 m² GELATO STORE 2.7 m²
SERVICE STORE 3.7 m²
10 m² STORE NEW R12 NON-SLIP VINYL
3 m² STORE 1.9 m²
NOTE - SLAB CHASING / TRENCHING: FLOORING - NO COVING
CONTRACTOR TO LIASE WITH CENTRE REQUIRED IN DRY AREAS STORE 3.3 m²
2
OPERATIONS MANAGER FOR APPROVAL WC-PWD 5.5 m²
WD.50
OF CHASING OR TRENCHING TO SLAB WC 2 m²
450H PLANTER BOX GE IN NEW COLD ROOM PANELLING -
1000
CHAN RING
FLOO UPGRADE CONDENSER AS
ENTRY
10 m² REQUIRED
NOTE - SLAB CORE HOLES:
50
NEW LOCKABLE JOINERY DOORS
10
CONTRACTOR TO LIASE WITH CENTRE
IN <LA04>
OPERATIONS MANAGER FOR APPROVAL UP
OF CORE HOLES TO SLAB CH
1 FL ANG
OO E
NEW R10 NON-SLIP WD.40 RI IN
NG
TILES - REFER FINISHES 3 STORE
INTERNAL
NOTE - ENGINEERING: SCHEDULE DINING STORE / HALL HALL 2 m² 450 X 25mm WHITE DECORWOOD
DRAWINGS TO BE READ IN CONJUNCTION 2 11 m²
10 m² 26 m² SHELVES ON WALL MOUNT STRIP
F.F. POL. CONC.
WITH ENGINEERING DRAWINGS BRACKETS
EXTENDED
WC
REFER TO ENGINEERING DRAWINGS FOR COLD ROOM 2 m²
3 m² STORE
STRUCTURAL DESIGN, FOOTING AND SLAB, 3 m²
CHAN RING
FLOO
TIE DOWN, BRACING AND ALL
30
MAIN DINING COLD ROOM
12
GE IN
STRUCTURAL DETAILS. 28 m² 4 m²
KITCHEN PWD TOILET AND WASHROOM
WC-PWD
FIXTURES TO AS1428.1
1170
21 m² 5 m²
NOTE - ACCESS AND EGRESS: BUILDER TO PROVIDE SIGNAGE FOR
AS PER CLAUSE D1.6 OF THE BCA: 5 EMERGENCY EXIT DOOR
THE UNOBSTRUCTED WIDTH OF EACH MAIN SERVICE 'STAFF AND EMERGENCY EXIT
10 m² FREEZER ONLY' IN 50mm HIGH CONTRAST TEXT
EXIT OR PATH OF TRAVEL TO AN EXIT, VERIFY FIXED 6 m²
EXCEPT FOR DOORWAYS, MUST NOT BE WD.40 MAIN QUEUE FREE LEVER TYPE HANDLE TO
FURNISHING SET OUT 4 STORE
LESS THAN 1M 14 m² CLEANING COMPLY WITH BCA SECTION D
PRIOR TO MANUFCATURE 4 m²
5 m²
EGRESS REQUIREMENTS -
AS PER CLAUSE D2.21 OF THE BCA/NCC: REFER NOTES
ALL DOOR HANDLES TO BE READILY
OPENABLE WITHOUT A KEY FROM THE
SIDE THAT FACES A PERSON SEEKING NEW R12 NON-SLIP VINYL
EGRESS, BY A SINGLE HAND DOWNWARD FLOORING - NO COVING
NEW R12 NON-SLIP VINYL
OR PUSHING ACTION ON A SINGLE DEVICE REQUIRED IN DRY AREAS
FLOORING - COVED AT ALL
WHICH IS LOCATED BETWEEN 900mm AND VERTICAL JUNCTIONS
2 2
1100mm FROM THE FLOOR
WD.50 WD.50
PART D3 OF THE BCA REQUIRES ACCESS PROPOSED FLOOR PLAN
FOR PEOPLE WITH DISABILITIES TO
COMPLY WITH AS1428.1-2009 AND AS1428.4 2 1 : 100
SITE DATA: CLIENT: DRAWING NO: JOB NO: NOTES
MATTHEW GEORGE - TWX PTY LTD WD.20 E Q1609 CHECK ALL DIMENSIONS AND LEVELS ON SITE BEFORE
LOT No. 1 ON: BUP106812 CONSTRUCTION.
PARISH: NOOSA PROJECT:
SCALE AT A3: DRAWN:
COUNTY: MARCH A LITTLE BIRDIE DO NOT SCALE OFF DRAWINGS. NOMINATED DIMENSIONS TAKE
As indicated KBC PRECEDENCE OVER SCALE.
ADDRESS:
LOCAL GOVT: NOOSA SHIRE COUNCIL E REVISED: S/S SHEETING, 04/07/16 KBC ALL CONSTRUCTION AND MATERIALS IN STRICT ACCORDANCE WITH
'OFFSHORE' COMPLEX ISSUED FOR: ISSUE DATE:
QBCC LICENCE
FLOORING, DATA, PLANTER.
THE BCA / NCC, LOCAL AUTHORITIES AND ALL RELATIVE REGULATIONS
ADDED: STRIP SHELF, LEVER T3 / 287 GYMPIE TERRACE AND STANDARDS.
TENANCY AREA: 153m² HANDLE TENDER 22/06/16
NOOSAVILLE, QLD 4566
UCA 75m² C REVISED: KITCHEN LAYOUT, 27/06/16 KBC
1284073
© 2016 CAB ROTO. ALL RIGHTS RESERVED. NO PART OF THIS
SHELF SIZES DRAWING TITLE: REVISION: REVISED DATE: DOCUMENT MAY BE REPRODUCED IN ANY FORM OR BY ANY MEANS
REV DESCRIPTION DATE ISSUED PROPOSED FLOOR PLAN E 04/07/16 WITHOUT THE WRITTEN PERMISSION OF CAB ROTO.
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.
Full text of the other 1 page
Page 2
AREA USE SCHEDULE
APPROVED PLANS USE AREA
MCU16/0088 ACCESS
AMENITIES
59 m²
13 m²
NOOSA COUNCIL DINING
KITCHEN
67 m²
39 m²
20 OCTOBER 2016 SERVICE
STORE
25 m²
32 m²
AREA USE LEGEND
ACCESS
DINING AMENITIES
17 m²
DINING
SERVICE
12 m²
STORE KITCHEN
4 m²
SERVICE
STORE
ACCESS
47 m²
DINING
49 m²
STORE
8 m²
STORE AMENITIES
15 m² 13 m²
KITCHEN
39 m²
SERVICE
13 m²
ACCESS STORE
12 m² 5 m²
AREA PLAN
1 1 : 100
NOTES
CLIENT: DRAWING NO: JOB NO:
MATTHEW GEORGE - TWX PTY LTD WD.03 J1609 CHECK ALL DIMENSIONS AND LEVELS ON SITE BEFORE
CONSTRUCTION.
PROJECT:
SCALE AT A3: DRAWN:
A LITTLE BIRDIE DO NOT SCALE OFF DRAWINGS. NOMINATED DIMENSIONS TAKE
1 : 100 KBC PRECEDENCE OVER SCALE.
ADDRESS:
'OFFSHORE' COMPLEX ALL CONSTRUCTION AND MATERIALS IN STRICT ACCORDANCE WITH
ISSUED FOR: ISSUE DATE:
QBCC LICENCE
THE BCA / NCC, LOCAL AUTHORITIES AND ALL RELATIVE REGULATIONS
T3 / 287 GYMPIE TERRACE AND STANDARDS.
TENDER 11/0716
NOOSAVILLE, QLD 4566
1284073
© 2016 CAB ROTO. ALL RIGHTS RESERVED. NO PART OF THIS
DRAWING TITLE: REVISION: REVISED DATE: DOCUMENT MAY BE REPRODUCED IN ANY FORM OR BY ANY MEANS
REV DESCRIPTION DATE ISSUED AREA PLAN WITHOUT THE WRITTEN PERMISSION OF CAB ROTO.