Skip to the record
Beware of cheap imitations.

Original source · versioned page text

2309-36932 SRA - Information request

Attached to the e-mail MCU23/0101 - SARA information request - 561 Gympie Kin Kin Road, Kin Kin.

of 3

Page text shows just the words. Original shows the document exactly as it was published.

                                                                                              2309-36932 SRA



              approximately 100 - 110m sight lines available between a vehicle in the through lane and
              vehicle attempting to turn out of the driveway. The posted speed at this section is 90km/h
              with a design speed of 100km/h. The absolute min Extended Design Domain (EDD) values
              are:
                    Safe Stopping Distance (SSD) = 142m
                    Safe Intersection Sight Distance (SISD) = 183
                    Minimum Gap Sight Distance (MGSD) = 140m.

              Action:
              Provide a traffic impact assessment which demonstrates that the access to the State-
              controlled road can operate safely. The assessment should, at a minimum:
                   demonstrate that visibility at the proposed access point achieves the minimum
                       SISD and MGSD in the Department of Transport and Main Roads’ Road Planning
                       and Design Manual (RPDM) and relevant sections of the AUSTROADS ‘Guide to
                       Road Design, Part4A - Unsignalised and Signalised Intersections’, for a 100km/h
                       design speed (to suit the posted speed of 90km/h). A speed survey of Gympie Kin
                       Kin Road is recommended, to be undertaken in accordance with Department of
                       Transport and Main Roads, Queensland Manual of Uniform Traffic Control Devices,
                       Part 4: Speed controls, March 2022.
                   provide an annotated concept plan demonstrating the access can be updated to the
                       standard SD1807 type A - sealed for 10m from edge of road.
              The assessment is required to be RPEQ certified and be submitted in accordance with the
              Department of Transport and Main Roads’ Guide to Traffic Impact Assessment (GTIA).



How to respond
You have three months to respond to this request and the due date to SARA is 16 January 2024.
You may respond by providing either: (a) all of the information requested; (b) part of the information
requested; or (c) a notice that none of the information will be provided. Further guidance on responding to
an information request is provided in section 13 of the Development Assessment Rules (DA Rules).

It is recommended that you provide all the information requested above. If you decide not to provide all
the information requested, your application will be assessed and decided based on the information
provided to date.

You are requested to upload your response and complete the relevant tasks in MyDAS2.

As SARA is a referral agency for this application, a copy of this information request will be provided to the
assessment manager in accordance with section 12.4 of the DA Rules.

If you require further information or have any questions about the above, please contact Timothy
Ainsworth, Planning Officer, on 5352 9714 or via email [email protected] who will be
pleased to assist.




State Assessment and Referral Agency                                                              Page 2 of 3
Log in to download the original file

2309-36932 SRA - Information request.pdf · 191 KB (small file)

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.