OPW15/0113 Application for Boat Storage Device

 

A statement about how the proposed development addresses the local
government's planning schemes and any other planning documents relevant
to the application.

Cc] Confirmed

N/A

 

A statement addressing the relevant part(s) of the State Development
Assessment Provisions (SDAP).

Cl Confirmed
Xx Not applicable

 

Applications for building work (including extensions and demolition that i

is assessable development)

 

Floor plans drawn to an appropriate scale (1:50, 1:100 or 1:200 are
recommended scales) which show the following:
¢ the north point

¢ the intended use of each area on the floor plan (for commercial, industrial
or mixed use developments only)

¢ the room layout (for residential development only) with all rooms clearly
labelled

¢ the existing and the proposed built form (for extensions only)
e the gross floor area of each proposed floor area.

C] Confirmed
Not applicable

 

Elevations drawn to an appropriate scale (1:100, 1:200 or 1:500 are
recommended scales) which show plans of all building elevations and
facades, clearly labelled to identify orientation (e.g. north elevation).

| Confirmed
&X Not applicable

 

Plans showing the size, location, proposed site cover, proposed maximum
number of storeys, and proposed maximum height above natural ground level
of the proposed new building work.

C] Confirmed
xX Not applicable

 

Plans showing the extent of any demolition that is assessable development.

CE] Confirmed
Not applicable

 

Applications for operational work involving earthworks (filling and excavating)

 

Drawings showing:
* existing and proposed contours
° areas to be cut and filled

¢ the location and level of any permanent survey marks or reference
stations used as datum for the works

¢ the location of any proposed retaining walls on the relevant land and their
height

¢ the defined flood level (if applicable)

° the fill level (if applicable).

C] Confirmed
Xx Not applicable

 

Applications for operational work involving roadworks

 

 

Drawings showing:
¢ existing and proposed contours

* the centreline or construction line showing chainages, bearings, offsets if
the construction line is not the centreline of the road and all intersection
points

¢ information for each curve including tangent point chainages and offsets,
curve radii, arc length, tangent length, superelevation (if applicable) and
curve widening (if applicable)

° kerb lines including kerb radii (where not parallel to centreline) and
tangent point changes (where not parallel to centreline)

¢ edge of pavement where kerb is not constructed

* position and extent of channelisation

* location and details of all traffic signs, guideposts, guardrail and other
street furniture

¢ pavement markings including details on raised pavement markers

C] Confirmed
Not applicable

 

 

 

IDAS form 6