Council archive · source document
Development Application part 2 Application Forms REC11/0145
Very large file (24.3 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.
LANDPARTNERS
storage area;
b) has a bund wall with a maximum height
of 100mm;
c) is serviced by a conveniently located
hosecock and backflow prevention
device, and connected to a water
supply; and
d) is roofed or otherwise covered if the
storage area is-
1) more than 1 m2; or
ii) storing wet waste; or
iii) storing other waste with a high potential to
cause pollution if washed or leaked from the
bins, including waste oil or putrescibles.
Compliance
07 Not Applicable - The proposal is for a residential subdivision
C: Water Sensitive Design Code
1cobmr l column 2
Specific Oukort M 6 - Rut 4:;; 1 t 0 L' 2 z. - - 1 14.'^ "*I., abteIso it ans. of coafer a able)
Water reuse S1. 1 Development complies with the water
01 Development uses a combination of quality standards in Table 2 of the SEQ
detention and retention systems to capture run- Regional Plan Implementation Guideline No.
off from areas on the site; 7 for Water Sensitive Urban Design;
Compliance
S1.1 Not Applicable - Table 2 of the SEQ Regional Plan Implementation Guideline No. 7 for Water
Sensitive Urban Design does not apply to the proposed development given that it is for very low-
density development.
02 Water storage devices must have sufficient 52. 1 No solution provided
capacity having regard to local rainfall pattern
and the catchment area of roof or other hard
standing surface;
Compliance
02 Not Applicable - The development is for an infill subdivision and water storage devices will be
included as part of future development.
03 Captured water is utilised for all non-potable 53. 1 Captured water is plumbed to be
uses on site; available for all external uses including
gardening, irrigation, ponds, filling swimming
pools and outdoor cleaning, as well as all
ground floor toilet cisterns and washing
machine cold taps;
AND
53.2 Where the captured water is used for
toilet flushing and/or laundry use, an
automatic or manual interchange device that
allows alternate use of captured water or the
reticulated water supply is installed to
ensure that there is a continual supply of
water for sanitary flushing and laundry use.
Compliance
03 Not Applicable - The development is for an infill subdivision and water storage devices will be
included as part of future development.
04 On-site detention does not adversely impact S4. 1 No solution provided
on water requirements downstream of the site
where the water is required to sustain the ecology
BRSS6220.000 Report for Lodgement 58
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Development Application part 2 Application Forms REC11/0145Related documentApplication case desk ↗
About this file
- File size
- 24.3 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.