Council archive · source document
Code Assessments · MCU21/0015
CODE ASSESSMENTS
Flood Hazard Overlay Code
Flood Hazard Overlay Code
Performance outcomes Acceptable outcomes Response
Floodplain protection, immunity and safety - for development areas
PO1 AO1 Complies
Development provides that for all flood events The finished flood level is not less than the
up to and including the DFE : minimum design levels specified in Table 8.2.6.4 The proposal has a flood level of 2.4 m AHD, a finished
ground surface level of 2.4 m AHD, and a habitable
floor level of 2.7 m AHD
1. the safety of people on the site is
protected; and
2. the risk of damage to property on
the site is avoided or minimised as
far as practicable.
PO2 AO2 N/A
All lots have sufficient area that is The minimum area above flood level (flood free area) for The proposal is not a proposal for subdivision
above the DFE flood level or where modelling is not each lot, is in accordance with Table 8.2.6.5.
available, the highest recorded flood level, to safely
and adequately accommodate the intended use.
PO3 AO3 N/A
For reconfiguring a lot or operational works, Development areas are not filled to reduce flood risk. The proposal is not a proposal for subdivision
development is undertaken in a manner that
ensures:
1. natural hydrological systems are
protected from erosion, scour or flood
damage on the premises or other
premises;
2. natural landforms and drainage lines
are maintained to protect the
hydraulic performance of waterways
and flood plain; and
3. development integrates with the
natural landform rather than
Page | 72
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Code Assessments.pdfRelated documentApplication case desk ↗
About this file
- File size
- 886 KB (small file)
- File type
No other editions are linked here.