Viridian III Technical Specification OPW1 [As Published] · 142008.256

                                                                      VIRIDIAN III - Landscape Works

5.     EDGING


5.1    TIMBER EDGING

5.1.1 GENERAL
Set edging’s flush with adjoining surfaces to define planting, grass areas or both. Fix to pegs
using galvanized nails, two per fixing. Drive pegs into the ground at 1500 mm centres
maximum on the planting side of the edging and on both sides of joints between boards, with
peg tops 15 mm below the top of the edging.

Joins: Join timber edging where required and reinforce with 75x15x450mm long HW timber
joiner fixed with four galvanized nails.

Supply and install timber structures, furniture and fixtures as following and as per detailed
drawings.


MEMBER                  SIZE                   GRADE                      FINISH
Timber Garden Edge      19 x 90mm              CCA Pine                   Sawn
Timber Stake            45 x 45 x 600 mm       CCA Pine                   Sawn




                                     END OF SECTION




EDAW Aust                            Page 15                        February 2008