OPW13/0072 Application for permit to damage vegetation 22 Noosa Parade Noosa Heads

    ’,jr




to the application.


Applications for building work (including extensions and assessable demolition)

Floor plans drawn to an appropriate scale (1:50, 1:1 00 or 1 :200 are                          D Confirmed
recommended scales) which show the following:
                                                                                               D Not appl.icable_
.          the north point
.          the intended use of each area on the floor plan (for commercial, industrial
           or mixed use     developments only)
.          the room layout (for residential development only) with all rooms clearly
           labelled
.          the existing and the proposed built form (for extensions only)
.          the gross floor area of each proposed floor area.

Elevations drawn to an appropriate scale (1:100,1:200 or 1:500 are                             D Confirmed
recommended scales) which show plans of all building elevations and
facades, clearly labelled to identify orientation (e.g. north elevation).
                                                                                               D Not applicable
Plans showing the size, location, proposed site cover, proposed maximum                        D Confirmed
number of storeys, and proposed maximum height above natural ground level
of the proposed new building work.
                                                                                               D Not applicable
Plans showing the extent of any assessable demolition.                                         D Confirmed
                                                                                               D Not applicable
Applications for operational work involving earthworks (filling and excavating)

drawings showing:                                                                              D Confirmed
.
           existing and proposed contours                                                      D Not applicable
.areas              to be cut and filled
.          the location and level of any permanent survey marks or reference
           stations used as datum for the works
.          the location of any proposed retaining walls on the relevant land and their
           height
.          the defined flood level (if applicable)
.          the defined fill level (if applicable).

Applications for operational work involving roadworks

Drawings showing:                                                                              D Confirmed
.
           existing and proposed contours                                                      D Not applicable
.          the centreline or construction line showing chainages, bearings, offsets if
           the construction line is not the centreline of the road and all intersection
           points
.          information for each curve including tangent point chainages and offsets,
                 length, tangent length, superelevation (if applicable) and
           curve radii, arc

       widening (if applicable)
           curve

.kerb lines including kerb radii (where not parallel to centreline) and
 tangent point changes (where not parallel to centreline)
.
           edge of pavement where kerb is not constructed
.          position and extent of channelisation
.          location and details of all traffic signs, guideposts, guardrail and other
           street furniture
.
           pavement markings including details on raised pavement markers
.          catch pit, manhole and pipeline locations
.
           drainage details (if applicable)
.cross              road drainage culverts (if applicable)
.          concrete footpaths and cycle paths
.          location and details for access points, ramps and invert crossings


3                                                            IDAS form 6-Building or operational work assessable against a planning scheme
                                                                                                            Version 2.017 December 2012