Bakaric - Engineer certificate

DocuSign Envelope ID: 42A5B2DE-647A-40B2-B882-44F9DF5E044B




                     (c) the prescribed tidal work has been designed to comply with Schedule 3 – Code for
                          assessable development that is prescribed tidal works of the Coastal Protection and
                          Management Regulation 2017.
                 3. This certification does not cover the construction or installation of the works on site. The
                    Contractor shall confirm the adequacy of the site conditions during installation and shall advise
                    the Engineer if variation from details shown on the drawings occur. No detailed site
                    investigation or studies have been carried out by us or provided to us for consideration. The
                    design review has been carried out on the basis of limited enquiry only. Pile and land anchor
                    depths shown are applicable to founding in stiff clay or dense sand. There is some additional
                    risk of failure should the above design criteria be exceeded, or actual site conditions be inferior
                    to those assumed. If ground conditions other than those described above are encountered
                    during construction or seabed levels encountered are deeper than those shown on the
                    drawings, further advice should be sought. Safety in Design Considerations have been taken
                    into account as part of this design but are the ultimate responsibility of the contractor and end
                    user.




                                                                                    MARK KREUTS RPEQ 11007

            --------------------------------------------------      ----------------------------------------------------------------
                            Signed                                         Print name and RPEQ registration number
            (person making this declaration)


                       11/12/2023
            -------------------------------------------------
                            Dated