131001 Minor Change Request · 132006.268.03

     (iv) -
     (V) -

     (vi) Washing plant, equipment or vehicles shall be undertaken off-site. If on-site
           washing of any plant or equipment is necessary, all wastewater shall be
           collected in a sump and disposed of off-site as trade waste by a registered
           operator.

     (vii) -
     (viii) Rehabilitation of the waterway of the site, as indicated by the 1997 Strategic Plan
             (Open Space-Conservation & Waterway Protection) is to be undertaken in
             addition to replanting as detailed in Drawing HJ0085.1.2 of the Conceptual Site-
           Based Stormwater Management Plan.

18B. -

Erosion & Sediment Control

19. Any person acting on this permit shall prevent erosion and sediment export from
     leaving the site. Site control measures such as silt fencing, controlled gravel access to
     the site and controlled disposal of waste, will be necessary. In this regard plans
     detailing the methods of controlling erosion and sediment are required to be submitted
     to the Council for approval prior to obtaining a Development Permit for Operational
     Works.

General

20. For the following classes of work associated with development, a Development Permit
     for Operational Works must be obtained prior to commencement of works relating to
     that class of work. The application may combine any or all of these classes of work:-

           Access and/or Carparking.
           Roadworks.
           Stormwater Drainage.

           Frontage Works.
           Erosion & Sediment Control
21. A suitably qualified Registered Professional Engineer shall prepare engineering
     drawings and specifications for all engineering works that will become Council
     infrastructure, which shall be submitted in conjunction with an application for a
     Development Permit for Operational Works. In this regard a DXF/DWG file on GDA94
     zone 56 grid of the proposed cadastre layout is to be submitted in conjunction with any
     application for Operational Works.

22. Digital detailed designs including drawings, calculations, specifications and a schedule
      of works, shall be submitted with any application for a Development Permit for
      Operational Works in respect of roadworks and stormwater drainage works. The
      design shall be in accordance with Council's Planning Scheme Policy PSP05 -
      Engineering Design Standards - Roads, Drainage and Earthworks. To avoid conflict
      with underground pipes or services, all existing and proposed services required by the
      development shall be shown on the plans.

23. To facilitate production of As Constructed drawings it is suggested that all design
     drawings are submitted in the Asset Design and As Constructed (ADAC) digital format.
     (Guidelines on the use of ADAC are available at www.adac.com.au).




                                                                                                  4