Council archive · source document
Driveway Application and IDAS Forms - OPW14/0227
PAYS OR AT]
Standard Vehicle Crossover Application
Section 75 Local Government Act (2009)
lf access to your property is from a Queensland Government controlled road, you will require approval from the
Department of Transport and Main Roads to complete your crossover construction. Do not submit this application.
A vehicle crossover can only be classified as self-assessable providing that it complies with all of the attached conditions
and the appropriate standard drawings - SEQ R-050, or R-056. This is a free service.
If you answer ‘no’ to any of the following condition requirements, or are constructing a crossover that is in an urban area
and not concrete or asphalt/bitumen, this application will not be self assessable and an Operational Works approval is
required.
1. Applicant details (Applicant must be the property owner or provide written authority to act on behalf of the
owner)
Surname FEVTRELL Given Names Ro0keEet-
Postal Address 109__Coeo WAR <T
Suburb NOOSA HOR |State Os O jPostcode YS G~7
Business Phone A/H Phone Mobile 943 5SS2Z.0&°6
Email Address Ps Camfoutrell Ag mai licam Fax i
Street Address 104 COOYAR SI
Suburb MOOSA Hos | State Qin [Postcode SOT
Property Number (from Rates Notice) 170380 [Lot and RP 16 6 "
3. Type of crossover to be constructed
[A Urban residential crossover (removal/alteration of kerb) - must be constructed as per standard drawing SEQ R-050
O Rural crossover (pipe crossing) — must be constructed as per standard drawing SEQ R-056 (Gravel)
3. Checklist for works
Is the crossover to be constructed from concrete (includes plain, coloured or exposed aggregate concrete),
asphalt or bitumen? Stencilled or raised edges are considered as Non Standard, C1 Yes M1 No
Is this going to be the only crossover for this property? Aves O No
Is the crossover access located so as to provide a clear view of passing pedestrians and vehicles? Yes O No
Is the crossover in a location where there are no painted or concrete traffic islands on the road in
front of the crossover? eYes O No
|s the crossover at least 1.0 metre clear of the nearest stormwater pit or power pole? Yes 0 No
Is the crossover in a location where there are no road signs or trees in the way? 0 Yes BNo
Is the crossover in a location where its construction will not disturb a survey mark? Yes ONo
Is the crossover in a location where there are no water meters, fire hydrants or valves in the path
of the crossover? Yes 0 No
Is the crossover in a location where it will not cover the water supply pipe between the main and
the meter? a Yes ONo
Is the crossover in a location where there are no sewerage or stormwater manholes in the path
of the crossover? a Yes C1No
Will the crossover levels match the existing concrete footpaths (if presenij? —— _ Yes 0 OONo
Development ‘Gounter
bBo MAY 2016 au
www.ncosa. git. gov.
Tewantin -
NOOSA COUNC PO Box 141 P.{07)
ane ar sas oO TL TEWANTIN QLD 4565 F. (07)
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of the other 15 pages
Page 2
RPM Od tel im co mnolcl Is the crossover outside of a prohibited location as shown in Standard Drawings number SEQ R-050, or for rural crossover Standard Drawing number SEQ R-056? Yes 0 No Is the crossover in a location where it will not be within 10 metre of the approach side of a bus stop? Yes D No Is the crossover in a location where it will not be built over a council easement? Yes ONo Will the crossover be constructed in accordance with the appropriate Standard Drawings — SEQ R-050 or R-056 (including levels and grades)? Yes ONo For a residential crossover is it under 25 metres in Jength within the road reserve? Yes O No For a rural crossover is it under 45 metres in length within the road reserve? LebYes-EHNo t+ If you are on a corner, will the crossover be constructed in the road described in your street address? _--FT-Yés LI No | Note: If you have answered ‘ NO ’ to any of the above condition requirements, the application will not be self-assessable and an Operational Works approval is required. 4. Declaration of applicant (We have read, understood and hereby agree to comply with the attached conditions. (We understand that the construction of a crossover is the responsibility of the property owner. We understand that the construction of the crossover is at the risk of the owner. We understand that the removal and reinstatement of the impacted section of the kerb and channel is considered to be part of the construction of the crossover and therefore the responsibility of the property owner. We understand that if excavation is required IMve should contact “Dial Before You Dig” on 1100. We understand that any damage caused by my activity or damage not notified to council prior to commencing work will be repaired at my expense. IWe understand that Noosa Shire Council has the discretion to remove or modify any crossover not constructed or maintained to council’s satisfaction or if a reasonable objection is raised by a public utility provider or others and that any such modification will be at my expense. We understand that if Ive do not comply with the standard drawings, conditions and requirements, council may direct me to undertake modifications of the crossover at my expense. We understand that if I/we fail to comply with a direction from council regarding my crossover, council may attend to any modifications necessary to ensure compliance with its standard drawings, conditions and requirements at my expense. (We agree to indemnify Noosa Shire Council against any claims in negligence or breach of contract relating to the crossover that I/we construct and maintain. We understand where our crossover is required to be removed or modified by Noosa Shire Council or a public utility provider there is no expectation or requirement to reinstate the crossover as constructed but rather only to reinstate to a standard compliant with the standard drawings. We agree that if and when we sell the property, [AVe will advise the new owner of the conditions described in this document, which will then apply to the new owner. | agree to maintain the vehicular crossover in a safe condition to the satisfaction of the Noosa Shire Council's Civil Works Services Manager. If I/we fail to do so or a reasonable objection to the crossover is raised by others, Council may issue a direction to bring the vehicular access into compliance with Council's standards. Should there be further non-compliance; penalties under section 75 of the Local Government Act (2009) may apply. lWe, the applicant, declare that the above information is correct in all respects, at the time of lodgement of this application with the Noosa Shire Council. Should any of the details given in relation to this application be changed in the future, the applicant shall advise the Noosa Shire Council in writing prior to any such change being implemented. Signature Rt 2 Date ib /s| 14
Page 3
Terms and conditions:
For the purpose of constructing a crossover that is classed as self-assessable development, Noosa Shire Council grants
permission to carry out work on a Road Reserve or on Council Owned Land, subject to the following terms and
conditions:
(a) Adequate warning of the presence of works on a Road Reserve or Council Owned Land shall be given in
accordance with the Manual of Uniform Traffic Control Devices (MUTCD) *.
(1) Between sunset and sunrise such warning shall at least consist of a barrier with warning lights and a
reflectorised warning sign on each side of the works.
(2) Between sunrise and sunset such warning shall at least consist of a barrier with warning flags or a
warning sign on each side of the works.
(b) Any steps necessary for the protection of the public shall be taken by the applicant at the applicants’
expense.
(c) Work shall proceed without any interruption to traffic. If a traffic lane closure is required, the person carrying
out the works shall have the relevant road and footpath closure permit form approved prior to any road
closure occurring. Works shall be carried out in accordance with the MUTCD *.
(d) The works shall be backfilled, consolidated and the surface reinstated immediately after the works are
completed, or before this permission expires, whichever is the sooner.
(e) Any subsidence or other damage which occurs and is attributable to the work done under the application
shall be repaired by the applicant or the applicants’ agent within forty eight (48) hours of receiving notice to
do so by the Authorised Officer.
(f) The applicant shall be required to obtain a Public Liability Insurance Policy of not less than $20 million
covering any risk arising from the proposed work.
(g) Aminimum 1.5 metre pedestrian throughway shall be maintained at all times. This pedestrian throughway
shall be of equivalent standard to existing or to the satisfaction of the Authorised Officer.
(h) Ifrelocating an existing crossover, the old crossover must be removed and the kerb and channel reinstated.
(i) If the applicant constructs a non-conforming crossover and fails to get the appropriate approvals the
crossover may be removed by council at the owner's expense.
* The MUTCD is available free from the Main Roads website: www.mainroads.qid.gov.au/Business-and-
industry/Roadbuilders/Technical-publications/Manual-of-uniform-traffic-control-devices.aspx
Receipt no. ©:
[INA
FWY Ras
Initial - a Date stamp
Privacy
Council will use any personal information provided for the intended purpose only and for remaining in contact with you. Council is
authorised to collect this information in accordance with the Local Government Act 2009 and other Local Government Acts. Your
personal information is only accessed by persons authorised to do so. Your personal information is dealt with in accordance with
council’s privacy policy.
Page 4
; _ Please en Kebrev? Yor pagers 0 Ov
$315 60° _ fetta TATSTIAOON
ey
Department of State Development, infrastructure ‘vt tTe2
Hr \Y
IDAS form 1——Appiication details
(Sustainable Planning Act 2009 version 3.0 effective 1 July 2013)
This form must be used for ALL development applications.
You MUST complete ALL questions that are stated to be a mandatory requirement unless otherwise identified on this
form.
For all development applications, you must:
* — complete this form (DAS form 1—Application details)
* complete any other forms relevant to your application
* provide any mandatory supporting information identified on the forms as being required to accompany your
application.
Attach extra pages if there is insufficient space on this form.
All terms used on this form have the meaning given in the Sustainable Planning Act 2009 (SPA) or the Sustainable
Planning Regulation 2009.
| This form and any other IDAS form relevant to your application must be used for development applications relating to
_ strategic port land and Brisbane core port land under the Transport Infrastructure Act 1994 and airport land under the
Airport Assets (Restructuring and Disposal) Act 2008. Whenever a planning scheme is mentioned, take it to mean land
use plan for the strategic port land, Brisbane core port land or airport land.
PLEASE NOTE: This form is not required to accompany requests for compliance assessment.
This form can also be completed online using MyDAS at www.dsdip.gid.gov.au/MyDAS
Mandatory requirements
Name/s (individual or company name in full) Ro BER Row T2GELe
For companies, contact name
Mobile number (non-mandatory requirement)
Postal address {09 CLootAd ara
Suburb MVOOSA Heh os:
State Qe90 Postcode 145679
Country Aust
Contact phone number O4 3S SSLOBE - |
v7 |
Fax number (non-mandatory requirement) |
Great state. Great opportunity.
Queensland
Government #
Page 5
Email address (non-mandatory requirement) ram fe,tre! [email protected] wa Applicant's reference number (non-mandatory requirement) 1... What Is the nature of the development proposed and what type of approval is being sought? Table A—Aspect 1 of the application (If there are additional aspects to the application please list in Table B—Aspect 2.) a) What is the nature of the development? (Please only tick one box.) C] Material change of use C] Reconfiguring a lot LY Building work CT] Operational work b) What is the approval type? (Please only tick one box.) L] Preliminary approval [1 Preliminary approval [A Development permit Drivewausy under s241 of SPA under s241 and s242 of SPA c) Provide a brief description of the proposal, including use definition and number of buildings or structures where applicable (e.g. six unit apartment building defined as a multi-unit dwelling, 30 lot residential subdivision etc.) RE Place CROSSOVER WITH COMECRETE TO ROD GS 'OE OF FOOT PATH WWO SURE STONE OW HOUSE SIDE OF PATH To SAVE KARRY PIME TREE. d) | Whatis the level of assessment? (Please only tick one box.) (_] Impact assessment [Code assessment Table B—Aspect 2 of the application (If there are additional aspects to the application please list in Table C— Additional aspects of the application.) a) Whatis the nature of development? (Please only tick one box.) C Material change of use CL Reconfiguring a lot C] Building work CT Operational work b) What is the approval type? (Please only tick one box.) LJ Preliminary approval O Preliminary approval Cc Development under s241 of SPA under s241 and s242 permit of SPA c) Provide a brief description of the proposal, including use definition and number of buildings or structures where applicable (e.g. six unit apartment building defined as a multi-unit dwelling, 30 lot residential subdivision etc.) Re d) Whatis the level of assessment? LJ Impact assessment Oo Code assessment Table C—Additional aspects of the application (If there are additional aspects to the application please list in a separate table on an extra page and attach to this form.) CT] Refer attached schedule CL] Not required IDAS form 1--App Version 2.6
Page 6
2. Location of the premises (Complete Table D and/or Table. as applicable. Identify each lotin a separate row.) Table D—Street address and lot on plan for the premises or street address and lot on plan for the land adjoining or adjacent to the premises (Note: this table is to be used for applications involving taking or interfering with water). (Attach a separate schedule if there is insufficient space in this table.) CJ Street address and lot on plan (All lots must be listed.) L] Street address and lot on plan for the land adjoining or adjacent to the premises (Appropriate for development in water but adjoining or adjacent to land, e.g. jetty, pontoon. All lots must be listed.) Street address Lot on plan Local government area description (e.g. Logan, Cairns) Lot Unit Street Street name and official Post- Lot no. Plan type no. no. suburb/ locality name code and plan no. i) - ii) iii) Planning scheme details (If the premises involves multiple zones, clearly identify the relevant zone/s for each lot in a separate row in the below table. Non-mandatory) Lot Applicable zone / precinct Applicable local plan / precinct Applicable overlay/s i) ii) ili) Table E—Premises coordinates (Appropriate for development in remote areas, over part of a lot or in water not adjoining or adjacent to land e.g. channel dredging in Moreton Bay.) (Attach a separate schedule if there is insufficient space in this table.) Coordinates Zone Datum Local government (Note: place each set of coordinates in a separate row) reference area (if applicable) Easting Northing Latitude Longitude L] aGpas4 L] wessa CI other (indicate'square metres) sed 149 on 4. Curtent use/s of the premises (e.g. vacant land, House, apartment building, cane farm etc.) (FOUS&
Page 7
5.” Are there any current approvals (é g:'a preliminary. app val) associated with this application? (Non- S mandatory’ requirement). : [7 No [|] Yes—provide details below List of approval reference/s Date approved (dd/mm/yy) Date approval lapses (dd/mm/yy) .6. ls. owner’s.consent required for this application? (Refér to hotes at the end of this form for more information.) fy No C] Yes—complete.either Table F, Table G or Table H as applicable Table F Name of owner/s of the land |We, the above-mentioned owner/s of the land, consent to the making of this application. Signature of owner/s of the land Date Table G Name of owner/s of the land | The owner's written consent is attached or will be provided separately to the assessment manager. Table H Name of owner/s of the land CT By making this application, |, the applicant, declare that the owner has given written consent to the making of the application. 7... Adentity it any of the following apply to the premises (Tick applicable:bowes.) Adjacent to a water body, watercourse or aquifer (e.g. creek, river, lake, canal)—complete Table | On strategic port land under the Transport Infrastructure Act 1994—complete Table J In a tidal water area—complete Table K On Brisbane core port land under the Transport Infrastructure Act 1994 (No table requires completion.) OOOOO On airport land under the Airport Assets (Restructuring and Disposal) Act 2008 (no table requires completion) Table | Name of water body, watercourse or aquifer Table J Lot on plan description for strategic port land Port authority for the lot IDAS form 1--Appitcation Version 3.0-—-1 Jui
Page 8
Table K Name of local government for the tidal area (if applicable) Port authority for the tidal area (if applicable) 8. “Are there any. exi: mises? (e.g. for vehicular access; electricity, overland flow, “water etc) ve : , we x No [_] Yes—ensure the type, location and dimension of each easement is included in the plans submitted 9. Does the. proposal include new ‘building work or operational work on the premises? (Including: any services) ° us [] No A Yes—ensure the nature, Idcation and dimension of proposed works are included in plans submitted 10, Is: the payment of a portable. Jong. “service leave levy: applicable to this ‘application? (Refer to notes at the end of this form:for'more information.) [Hi No—go to question 12 [] Yes id? (Refer to notes at the end of:this form for more Yes—complete Table L and submit with this application the yellow focal government/private certifier’s copy of the receipted QLeave form Table L Amount paid Date paid QLeave project number (6 digit number (dd/mm/yy) starting with A, B, E, L or P) 12... “Has the local, government agreed to apply a Superseded planning Scheme: to this application under : section 96 of ‘the. Sustainable Planning.Act 2009? : en we [_] Yes—please provide details below Name of local government Date of written notice given | Reference number of written notice given by local government by local government (if applicable) (dd/mm/yy) IDAS form 1--~Appite: Varsion 3.6
Page 9
13. application
nelude:all IDAS
ftot i
Description of attachment or title of attachment Method of lodgement to
assessment manager
14: Applicant’s declaration
A By making this application, | declare that all information in this application is true and correct (Note: it is unlawful to
provide false or misleading information)
Notes for completing this form
¢ Section 261 of the Sustainable Planning Act 2009 prescribes when an application is a properly-made application.
Note, the assessment manager has discretion to accept an application as properly made despite any non-
compliance with the requirement to provide mandatory supporting information under section 260(1)(c) of the
Sustainable Planning Act 2009
Applicant details
* Where the applicant is not a natural person, ensure the applicant entity is a real legal entity.
Question 1
* Schedule 3 of the Sustainable Planning Regulation 2009 identifies assessable development and the type of
assessment. Where schedule 3 identifies assessable development as “various aspects of development” the
applicant must identify each aspect of the development on Tables A, B and C respectively and as required.
Question 6
¢ Section 263 of the Sustainable Planning Act 2009 sets out when the consent of the owner of the land is required for
an application. Section 260(1)(e) of the Sustainable Planning Act 2009 provides that if the owner's consent is
required under section 263, then an application must contain, or be accompanied by, the written consent of the
owner, or include a declaration by the applicant that the owner has given written consent to the making of the
application. If a development application relates to a state resource, the application is not required to be supported
by evidence of an allocation or entitlement to a state resource. However, where the state is the owner of the
subject land, the written consent of the state, as landowner, may be required. Allocation or entitlement to the state
resource is a separate process and will need to be obtained before development commences.
Question 11
e The Building and Construction Industry (Poriable Long Service Leave) Act 1997 prescribes when the portable long
service leave levy is payable.
¢ The portable long service leave levy amount and other prescribed percentages and rates for calculating the levy
are prescribed in the Building and Construction Industry (Portable Long Service Leave) Regulation 2002.
IDAS form 1-—Appiication ok
Version 3.0~--1 Jul
Page 10
Question 12 ¢ The portable long service leave levy need not be paid when the application is made, but the Building and Construction Industry (Portable Long Service Leave) Act 1991 requires the levy to be paid before a development permit is issued. * Building and construction industry notification and payment forms are available from any Queensland post office or agency, on request from QLeave, or can be completed on the QLeave website at www.qleave.qid.gov.au. For further information contact QLeave on 1800 803 487 or visit www.qleave.qid.gov.au. Privacy—The information collected in this form will be used by the Department of State Development, Infrastructure and Planning (DSDIP), assessment manager, referral agency and/or building certifier in accordance with the processing and assessment of your application. Your personal details should not be disclosed for a purpose outside of the IDAS process or the provisions about public access to planning and development information in the Sustainable Planning Act 2009, except where required by legislation (including the Right to Information Act 2009) or as required by Parliament. This information may be stored in relevant databases. The information collected will be retained as required by the Public Records Act 2002. OFFICE USE ONLY Date received Reference numbers Ofw |4/0anT NOTIFICATION OF ENGAGEMENT OF A PRIVATE CERTIFIER To HE WEB aS? Council. | have been engaged as the private certifier for the building work referred to in this application Date of engagement Name number BSA Certification license Building classification/s QLEAVE NOTIFICATION AND PAYMENT (For completion by assessment manager or private certifier if applicable.) Date receipted . . . : Name of officer aa QLeave project Amount paid . form sighted by . Description of the work number ($) Date paid assessment wino sighted the manager The Sustainable Planning Act 2009 is administered by the Department of State Development, Infrastructure and Planning. This form and all other required application materials should be sent to your assessment manager and any referral agency. Department of State Development, Infrastructure and Planning PO Box 15009 City East Qld 4002 tel 13 QGOV (13 74 68) [email protected] www.dsdip.qid.gov.au IDAS form 1-—Apg: Varsion 3.0-—-7
Page 11
ro oes] 27]
Department of State Development, Infrastructure and Planning
IDAS form 6—B8uilding or operational work assessable
against a planning scheme
{Sustainable Planning Act 2009 version 3.0 effective 1 July 2013)
This form must be used for development applications for building work or operational work assessable against a
planning scheme.
You MUST complete ALL questions that are stated to be a mandatory requirement unless otherwise identified on this
form.
For all development applications, you must:
* complete DAS form 1—Application details
* complete any other forms relevant to your application
* provide any mandatory supporting information identified on the forms as being required to accompany your
application.
Attach extra pages if there is insufficient space on this form.
All terms used on this form have the meaning given in the Sustainable Planning Act 2009 (SPA) or the Sustainable
Planning Regulation 2009.
This form must be used for building work or operational work relating on strategic port land and Brisbane core port land
under the Transport Infrastructure Act 1994 and airport land under the Airport Assets (Restructuring and Disposal) Act
2008 that requires assessment against the land use plan for that land. Whenever a planning scheme is mentioned,
take it to mean land use plan for the strategic port land, Brisbane core port land or airport land.
This form can also be completed online using MyDAS at www.dsdip.ald.gov.au/MyDAS
Mandatory requirements
1, .. What is the nature of the work that requires assessment against a planning scheme? (Tick all applicable
. boxes.) gatles Bey ania o
[[] Building work—complete Table A vA Operational work—complete Table B
Table A
a) Whatis the nature of the building work (e.g. building, repairing, altering, underpinning, moving or demolishing a
building)?
Altirpatiow To ORWEWA? ~ CROSSOVER
b) Are there any current approvals associated with this application? (e.g. material change of use.)
yy No [] Yes— provide details below
List of approval reference/s Date approved (dd/mm/yy) Date approval lapses (dd/mm/yy)
‘e
Great state. Great opportunity.
Queenstand
Government
Page 12
Table B a) Whatis the nature of the operational work? (Tick all applicable boxes.) [_] Road works [] Stormwater [[] Water infrastructure [-] Drainage works [-] Earthworks [[] Sewerage infrastructure [_] Landscaping [-] Signage [_] Clearing vegetation under the planning scheme “ [7] Other—provide details | @RaSSorTh ALTAWATION b) Is the operational work necessary to facilitate the creation of new lots? (E.g. subdivision.) [7] No [] Yes—specify the number of lots being created c) Are there any current approvals associated with this application? (E.g, material change of use.) ry No [_] Yes—provide details below List of approval reference/s Date approved (dd/mm/yy) Date approval lapses (dd/mm/yy) en 18 Soave Mandatory supporting information [ 4. . Confirm that the following mandatory supporting information accompanies this application | Mandatory supporting information Confirmation of | Method of lodgement lodgement All applications involving building work or operational work A site plan drawn to an appropriate scale (4:100, 1:200 or 1:500 are [7| Confirmed recommended scales) which shows the following: ¢ the location and site area of the land to which the application relates (relevant land) * the north point e ithe boundaries of the relevant land ¢ the allotment layout showing existing lots, any proposed lots (including the dimensions of those lots), existing or proposed road reserves, building envelopes and existing or proposed open space (note: numbering is required for ail lots) * any existing or proposed easements on the relevant land and their function © any access limitation strips * all existing and proposed roads and access points on the relevant land. IDAS form 6-—-Btiding or op: &
Page 13
A statement about how the proposed development addresses the local CJ Contirmed
government's planning schemes and any other planning documents relevant
to the application.
A statement addressing the relevant part(s) of the State Development C] Contirmed
Assessment Provisions (SDAP). FT Not applicable
Applications for building work (including extensions and demolition that is assessable development)
Floor plans drawn to an appropriate scale (1:50, 1:100 or 1:200 are C] Contirmed
recommended scales) which show the following: [+t Not applicable
¢ the north point
© the intended use of each area on the floor plan (for commercial, industrial
or mixed use developments only)
¢ the room layout (for residential development only) with all rooms clearly
labelled
e the existing and the proposed built form (for extensions only)
¢ the gross floor area of each proposed floor area.
Elevations drawn to an appropriate scale (1:100, 1:200 or 1:500 are CJ Confirmed
recommended scales) which show plans of all building elevations and N licabl
facades, clearly labelled to identify orientation (e.g. north elevation). [€] Not applicable
Plans showing the size, location, proposed site cover, proposed maximum C] Confirmed
number of storeys, and proposed maximum height above natural ground level N licabl
of the proposed new building work. [4 ot applicable
Plans showing the extent of any demolition that is assessable development. H Confirmed
Not applicable
Applications for operational work involving earthworks (filling and excavating)
Drawings showing: [_] Contirmed
* existing and proposed contours [7 Not applicable
* areas to be cut and filled
¢ the location and level of any permanent survey marks or reference
stations used as datum for the works
e the location of any proposed retaining walls on the relevant land and their
height
the defined flood level (if applicable)
the fill level (if applicable).
Applications for operational work involving roadworks
Drawings showing: (_] Contirmed
¢ existing and proposed contours [-fNot applicable
e the centreline or construction line showing chainages, bearings, offsets if
the construction line is not the centreline of the road and all intersection
points
¢ information for each curve including tangent point chainages and offsets,
curve radii, arc length, tangent length, superelevation (if applicable) and
curve widening (if applicable)
* kerb lines including kerb radii (where not parallel to centreline) and
tangent point changes (where not parallel to centreline)
¢ edge of pavement where kerb is not constructed
* position and extent of channelisation
* location and details of all traffic signs, guideposts, guardrail and other
street furniture
® pavement markings including details on raised pavement markers
IDAS form 6---Building of operati
Page 14
catchpit, manhole and pipeline locations drainage details (if applicable) cross road drainage culverts (if applicable) concrete footpaths and cycle paths location and details for access points, ramps and invert crossings changes in surfacing material. Applications for operational work involving stormwater drainage Drawings showing: * existing and proposed contours ¢ drainage locations, diameters and class of pipe, open drains and easements ¢ manhole location, chainage and offset or coordinates and inlet and outlet invert levels ¢ inlet pit locations, chainage and offset or coordinates and invert and kerb levels. Applications for operational work involving water reticulation Drawings showing: kerb lines or edge of pavement where kerb is not constructed location and levels of other utility services where affected by water reticulation works pipe diameter, type of pipe and pipe alignment water main alignments water supply pump station details (if applicable) minor reservoir details (if applicable) conduits location of valves and fire hydrants location of house connections (if applicable) location of bench marks and reference pegs. Applications for operational work involving sewerage reticulation Drawings showing: location of all existing and proposed services tocation of all existing and proposed sewer lines and manhole locations location of all house connection branches kerb lines or edge of pavement where kerb is not constructed chainages design sewer invert levels design top of manhole levels type of manhole and manhole cover pipe diameter, type of pipe and pipe alignment location of house connections (if applicable) sewer pump station details (if applicable). Applications for operational work involving street lighting Drawings showing: lacation of all light poles and service conduits location of all other cross road conduits type of wattage and lighting any traffic calming devices additional plans for roundabouts and major roads (if applicable) details of any variations to normal alignment L] Confirmed [A Not applicable L] Confirmed Not applicable LI] Confirmed [J Not applicable Not applicable
Page 15
© details of lighting levels. | Applications for operational work involving public utility services Drawings showing: [_] Contirmed ¢ any existing light poles and power poles 4 Not applicable ¢ any existing underground services e details of proposed services e alteration to existing services. Applications for operational work involving landscaping works Drawings showing: [_] Contirmed ¢ the location of proposed plant species LA Not applicable e aplant schedule indicating common and botanical names, pot sizes and numbers of plants ® planting bed preparation details including topsoil depth, subgrade preparation, mutch type and depth, type of turf, pebble, paving and garden edge the location and type of any existing trees to be retained construction details of planter boxes, retaining walls and fences the proposed maintenance period irrigation system details. Privacy—Please refer to your assessment manager, referral agency and/or building certifier for further details on the use of information recorded in this form. OFFICE USE ONLY Ht | AN ss ; Date received Reference numbers The Sustainable Planning Act 2009 is administered by the Department of State Development, Infrastructure and Planning. This form and all other required application materials should be sent to your assessment manager and any referral agency. Department of State Development, infrastructure and Planning PO Box 15009 Gity East Qid 4002 tel 13 QGOV (13 74 68) [email protected] www.dsdip.qid.gov.au
Page 16
| Le /IOUVSE. ; GAtate re.
i [pier oo os ~ we eee ROOD 4
z »
es
| Thaw
CAR A
PARK MAC 9
| S
CONMTREET |
i
t
i
{
TURE STONE
PAVING
\. Be
17g? fe 5
EOS m™ ‘
TURF STONE
tenet ete
PAVING
a>
D>
Bs
AD
ine
a A
fre,
em OO LE Am OCH me
HAR
\ witb hb TRACE
°
\neaet - - — \
St
an
A
Oy
icc OD
2° G3
ag ©
of |
1© i
< i
S|
' |
cea ent re
oF CooyaRk ST —p>
Mo0SA HOS. &S67
NEw CROSSOVER,
Used in these records
Driveway Application and IDAS Forms - OPW14/0227Related documentApplication case desk ↗
About this file
- File size
- 814 KB (small file)
- File type
No other editions are linked here.