Skip to the record
Accept no substitutions.

Council archive · source document

Table 3 - Waste Management Code [As Published] · 132007.2398

of 4

Text shows just the words. Original shows the document exactly as it was published.

Table 3
Division 19—Waste Management Code
14.169 Waste Management Code
The provisions in this division comprise the Waste Management Code. They are—
•    compliance with the Waste Management Code (section 14.170);
•    overall outcomes of the Waste Management Code (section 14.171); and
•    specific outcomes and probable solutions for the Waste Management Code (section 14.172).
14.170 Compliance with the Waste Management Code
Development that is consistent with the specific outcomes in section 14.172 complies with the Waste Management Code.
14.171 Overall outcomes for the Waste Management Code
14.171.1 The overall outcomes are the purpose of the Waste Management Code.
14.171.2 The overall outcomes sought for the Waste Management Code are the following—
a)   The storage, disposal and management of solid and liquid waste are conducted in an safe and ecologically sustainable manner and without
     environmental nuisance;
b)   The on-site storage of waste does not create environmental nuisance or visual impact to adjoining property during the construction of a
     development; and
c)   Council and other licensed trade waste services are able to conveniently collect and dispose of waste generated by the development.
14.172 Specific outcomes and probable solutions for the Waste
Management Code
The specific outcomes sought for the Waste Management Code are included in column 1 of Table 14-57. Probable solutions for code assessable
development are included in column 2 of Table 14-57.
Table 14-57
                      column 1                                                   column 2                                            column 3
                  Specific Outcomes                               Probable solutions (if code assessable)                   Design Response/Comments
Waste separation                                             S1.1 Construction, operational and demolition        Matters relating to construction and operational
O1 Development that generates several classes                works are planned and managed in accordance          works will be addressed once building and civil
of waste is designed so waste is collected, stored           PSP1130;                                             contractors have been engaged.
and disposed of in a safe and ecologically                   AND
sustainable manner29.                                        S1.2 Adequate area is provided for on-site for
O2 Waste storage areas provide for adequate                  the collection and separate storage of recyclable,
separation of all recyclable and non-recyclable              non-recyclable, vegetative and hazardous
materials.                                                   materials in their specific waste streams during
29
  Any proposal for the disposal of liquid trade waste to     construction, operational and demolition works;
Council’s sewer must be in accordance with Noosa Council’s   AND
Environmental Health Section’s Trade Waste Policy.




Table 3 – Code Compliance Checklist – Waste Management                                                                                                               1
Full text of the other 3 pages

Page 2

                   column 1                                             column 2                                                      column 3
               Specific Outcomes                         Probable solutions (if code assessable)                             Design Response/Comments
                                                  S2.1 Waste storage areas allow for the separate
                                                  storage of different waste materials for reuse or
                                                  recycling by—
                                                  a) providing sufficient area to store all recyclable
                                                     material and recycling containers required,
                                                     and
                                                  b) sign posting the types of waste stored.
                                                  30
                                                     PSP 11 requires Waste Management Plans to be prepared
                                                  as part of certain types of development applications to ensure
                                                  proper consideration is given to waste minimisation,
                                                  segregation and reuse.

Design and location of waste storage areas        S3.1 Waste storage areas are designed and                        Bulk bin storage areas will be designed in
O3 Waste storage areas are located so that they   maintained in accordance with PSP 9;                             accordance with PSP 9.
are convenient and safe to use and provide for    AND
convenient and safe collection by service         S3.2 Waste storage areas are designed and                        The occupancy and use of the site presents a
vehicles;                                         located so they—                                                 number of different variables with regard to waste
AND                                               a) are easily accessed and convenient to use;                    storage and collection.
                                                  b) have unobstructed access for the collection of                Wheelie bins (80 l) for general refuse will be
                                                      the waste by service vehicles;                               provided to each detached unit and duplex unit.
                                                  c) provide for sufficient space for safe entry and               In lieu of separate recycle bins, common bins are
                                                      exit and servicing by Council’s contractor                   provided at the nodal points as detailed in
                                                      without the need for manual handling;                        section 5.3 of the planning report.
                                                  d) are clear of carparking bays, loading bays and                A bin storage area will be provided within the
                                                      similar areas;                                               basement of the apartment buildings.
                                                  e) are clear of footpaths and pedestrian access;                 A bulk storage bin area will be provided adjacent
                                                                                                                   to the care facility as shown on the site layout
                                                  f) are capable of being serviced by the collection
                                                                                                                   plan.
                                                      vehicle without impeding traffic flow; and
                                                                                                                   The movement and washing of bins on the site
                                                  g) have a level area provided for the storage of
                                                                                                                   will be undertaken by on-site staff.
                                                      waste and recyclable materials in standard
                                                      waste containers;
                                                  AND
                                                  S3.3 For uses that do not comprise a caretaker’s
                                                  residence or central management, the maximum
                                                  distance between waste storage areas and the
                                                  kerbside is—
                                                  a) for Multiple housing Type 3 – 40m;
                                                  b) for other uses – 70m; and

Table 3 – Code Compliance Checklist – Waste Management                                                                                                            2

Page 3

                   column 1                                              column 2                                            column 3
               Specific Outcomes                          Probable solutions (if code assessable)                   Design Response/Comments
                                                     S3.4 Pathways used to transport bins—
                                                     a) have a maximum grade of 1:15; and
                                                     b) are free of steps, stairs or other impediments;
                                                     AND
O4 The location and methods of waste storage         S4.1 Waste storage areas are—                        Waste storage and collection will be undertaken
minimises any adverse impacts on adjoining or        a) integrated with the building design, where        so as not to cause any nuisance to adjoining
nearby properties;                                      possible;                                         residential uses.
AND                                                  b) setback a minimum of 2m from side and rear
                                                        property boundaries;
                                                     c) screened so that bins are not visible from
                                                        neighbouring properties or passing vehicular
                                                        and pedestrian traffic; and
                                                     d) not located directly adjacent to dwelling units
                                                        on the site on neighbouring properties;
                                                     AND
O5 Waste storage areas are designed for ease                                                              Waste storage areas will be designed for ease of
                                                     S5.1 Waste storage areas are constructed of
of maintenance and ease of access for cleaning;                                                           maintenance and access to bins where such bins
                                                     impermeable, durable and non-textured materials
AND                                                                                                       are required to be moved to the kerbside for
                                                     and surfaces so that they are easily cleaned;
                                                                                                          collection.
                                                     AND
                                                     S5.2 A minimum distance of 0.5m distance is
                                                     provided between and around waste storage bins
                                                     to allow for manoeuvring and washing of bins.
O6 Waste storage areas provide a safe and            AND
secure environment for users through–                S6.1 No solution provided.                           Waste disposal areas will be properly illuminated
                                                                                                          and located for ease of use by residents but not
a) appropriate siting and access;
                                                                                                          readily open to the public.
b) the provision of lighting; and
c) restricting access to the general public by
   making the area clearly identifiable as private
   space (eg. through landscaping, change of
   paving material or fencing, rather than
   locking the area.




Table 3 – Code Compliance Checklist – Waste Management                                                                                                   3

Page 4

                  column 1                                           column 2                                              column 3
              Specific Outcomes                       Probable solutions (if code assessable)                     Design Response/Comments
Water management for waste storage areas         S7.1 The waste storage area —                          Waste storage areas will be designed to comply
O7 Waste storage areas are designed to contain   a) is bunded and graded so that washwater and          with the relevant design standards.
and appropriately dispose of leakage from bins      bin leakage are drained to the sewer or an on-
and wastewater from bin washing.                    site effluent disposal system via a gully within
                                                    the storage area;
                                                 b) has a bund wall with a maximum height of
                                                    100mm;
                                                 c) is serviced by a conveniently located
                                                    hosecock and backflow prevention device,
                                                    and connected to a water supply; and
                                                 d) is roofed or otherwise covered if the storage
                                                    area is—
                                                      i) more than 1m2; or
                                                     ii) storing wet waste; or
                                                    iii) storing other waste with a high potential to
                                                         cause pollution if washed or leaked from
                                                         the bins, including waste oil or
                                                         putrescibles.




Table 3 – Code Compliance Checklist – Waste Management                                                                                               4

Used in these records

About this file

File size
40 KB (small file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Table 3 - Waste Management Code [As Published].pdf · 40 KB (small file)

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.