Council archive · source document
Table 3 - Waste Management Code [As Published] · 132007.2398
column 1 column 2 column 3
Specific Outcomes Probable solutions (if code assessable) Design Response/Comments
Water management for waste storage areas S7.1 The waste storage area — Waste storage areas will be designed to comply
O7 Waste storage areas are designed to contain a) is bunded and graded so that washwater and with the relevant design standards.
and appropriately dispose of leakage from bins bin leakage are drained to the sewer or an on-
and wastewater from bin washing. site effluent disposal system via a gully within
the storage area;
b) has a bund wall with a maximum height of
100mm;
c) is serviced by a conveniently located
hosecock and backflow prevention device,
and connected to a water supply; and
d) is roofed or otherwise covered if the storage
area is—
i) more than 1m2; or
ii) storing wet waste; or
iii) storing other waste with a high potential to
cause pollution if washed or leaked from
the bins, including waste oil or
putrescibles.
Table 3 – Code Compliance Checklist – Waste Management 4
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Table 3 - Waste Management Code [As Published]Related documentApplication case desk ↗
About this file
- File size
- 40 KB (small file)
- File type
No other editions are linked here.