Original source · versioned page text
Attachment C_R.B23636.001.02.SEMP_final_lowres
Very large file (26.6 MB): the original may take a few minutes to open or download. The page text below is quick to read.
Noosa Spit SEMP Final Report 32
Numerical Modelling of Entrance Configurations
3.5.2 Laguna Bay Waves
The following wave parameter datasets were available for wave model development and calibration
(locations indicated in Figure 3-1):
• Mooloolaba Waverider Buoy operated by the Queensland Department of Environment and
Science (DES). The instrument is permanently installed in a depth of approximately 32 m; and
• Bottom-mounted ADCP within Laguna Bay. The temporary installation was in a depth of
approximately 9.5 m between 10/03/2019 and 30/04/2019.
Each dataset provides continuous recordings of significant wave height (Hs or Hsig), wave peak
period (Tp) and wave direction.
The model predictive skill for the ADCP deployment period is illustrated in Figure 3-5. The model
reproduces the recorded wave parameters well, noting the following trends:
• A tendency to slightly underpredict significant wave height peaks at the wave buoy and ADCP
locations;
• Accurate prediction of wave peak period at the wave buoy and ADCP locations; and
• A slight under prediction of refraction at Noosa Headland and wave direction at the ADCP
location.
G:\Admin\B23636.g.mpb.NoosaSpit_SEMP\R.B23636.001.02.SEMP_final.docx
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.