Original source · versioned page text
Town Planning Assessment Report (1)
Very large file: it may take a few minutes
The original of this document is very large (12.6 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.
1. do not dominate the street maximum of 6 metres wide; and
or building design; 2. do not encroach into
2. visually integrates with the boundary setback areas.
residential building; and Editor's note—refer to figure 6.9.2
3. do not present as a storey
to the street.
PO15 AO15 Complies with AO15
Driveways have a maximum width The proposed driveway has a
Hardstanding driveways and
of 6 metres within the property and maximum width of 6 metres
manoeuvring areas are designed so
only one footpath crossing is within the property and only
as not to dominate the streetscape
provided per property as part of the one footpath crossing is
nor adversely impact on the low
driveway. provided.
density residential amenity.
Roof design AO16.1 Not applicable
PO16 With the exception of the reuse or The site is in the Coastal
renovation of an existing building Communities local plan area.
Roof designs: which does not comply, in areas
1. contribute positively to the other than the Coastal Communities
character of the streetscape; and Noosa Heads local plan areas:
2. incorporate eaves and roof 1. the main roof of buildings
overhangs; has a pitch no less than 5 degrees;
3. avoid boxy elevations on and
the front facade of the building; 2. eaves apply to at least 75%
4. do not present an of the perimeter of the roof.
appearance of excessive bulk to the
street or neighbouring properties;
Editor’s Note — 450 millimetre
5. do not create opportunities eaves will achieve AO16.1(b)
for residents or building users to provided a 150 millimetre gutter is
overlook the private open space or used.
view into habitable windows or
doors of neighbouring properties.
AO16.2
Not applicable
The total width of any parapet wall
does not exceed 50% of the width
of the front facade of a building.
AO16.3 Not applicable
Development does not include No rooftop terrace proposed.
rooftop terraces.
PO17 AO17.1 Complies with AO17.1
Development is designed to Boundary fences and walls are The front fence proposes a
maintain the safety and security of designed to allow for casual height of approximately 2m.
persons on the premises and surveillance from the property to The fence provides privacy
nearby premises and to avoid the street and any adjoining public and security, whilst allowing
significant adverse changes to the spaces. for casual surveillance
solar access, air quality, noise, opportunities to the street
accessibility or other conditions Editors note- Casual can be through the inclusion of
enjoyed by users of associated, achieved by using open semi-transparent fencing and
adjoining or nearby premises. construction where no more than gates.
17
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Very large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.