Original source · versioned page text
UPDATED DA - Attachment 6 - Bushfire Management Plan
Plans and drawings: the text below has words only, no drawings.
Very large file (28.4 MB): may take a few minutes to open.
21
Options for fuel reduction burning may be safely undertaken during the
day.
Fuel reduction can be accomplished at this
Back burns should be initiated from a well-
site with either prescribed burning or
defended fire trail. If the fire trails as
mechanical fuel reduction.
identified in this plan are developed to
ensure all weather access is maintained they
Mechanical fuel load reduction is practical for
should be suitable for both controlled and
regrowth and grassed areas within the
wildfire suppression operations.
Landfill area and the road and track verges,
however it is impractical for the rest of the
Fire trails and firebreaks
site.
Fire trails and firebreaks provide the basis for
The only practical way to manage fuel loads
conducting controlled burns or wildfire
within the Conservation Zone is too
suppression from. This fire management
undertaken controlled burns.
plan specifies the development of a number
of fire trails and firebreaks.
This plan provides the basis for conducting
controlled burn via the fire management
The fire trails and firebreaks have been
units.
located throughout the Landfill site too
breakup the site into discrete fire
Fire Suppression
management units not only to provide a
strategy to reduce fuel loads and manage the
Back burning
reserves biodiversity but also by establishing
Back burning is undertaken to remove the a mosaic of burn patches which will
influence the spread of a wildfire through the
fuel from a vegetated area in the path of a
site.
fire so that when the fire reaches the burnout
area it has no fuel available and self-
The purpose of a fire trail is to identify those
extinguishes.
tracks which have been developed to enable
In both controlled burning and wildfire access for bushfire suppression appliances
whether they are Council or Qld Fire and
suppression operations, back burning is the
Rescue Service appliances.
major method of controlling the fire.
Temperature and humidity trends must be
The purpose of a firebreak is to protect
monitored carefully to determine the safest
infrastructure and vegetated areas from a
times to implement back burns.
low to medium intensity burn, however it
As controlled burns would generally not be may not be necessary or suitable to permit
vehicles to traverse a firebreak.
undertaken when the fire danger index is
above high, back burning would not be
It is noted that QFD urban appliances are not
necessary. However, in wildfire suppression
normally taken onto earthen tracks and
operations and a wildfire would potentially
therefore fire trails will mostly be utilised by
only threaten the Landfill site and
Rural and Council appliances.
neighbouring vegetation properties when the
Fire Danger Index (FDI) is greater than high,
back burning should commence when the
humidity begins to rise in the late afternoon
or early evening. With a lower FDI back
RFA24-059 – Noosa Land Fill and Waste Management Facility – Bushfire Management Plan
Rob Friend & Associates Pty Ltd 10th of October 2024
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.