Original source · versioned page text
RFI - Sustainable Design Code
Water efficiency and stormwater management Table 9.4.6.3 Criteria for assessment (part)
Performance outcomes Acceptable outcomes Applicants Response
Water efficiency and stormwater management
PO2 AO2.1 AO2.2 – The development is not for
Development maximises water efficiency If for accommodation activities, a minimum 3,000 accommodation activities.
on site by incorporating rainwater collection and litres of rain water storage is provided
reuse measures for non-potable purposes such as per dwelling and reused for non-potable
irrigation. purposes and incorporated into a stormwater
management plan for the development.
AO2.2
With the exception of accommodation activities,
rain water storage sufficient for the intended use
is captured and used on-site for non-potable
purposes and incorporated into a stormwater
management plan for the development.
Editor’s note—The Queensland Development
Code includes provisions for the installation of
rain water tanks and the reuse of stormwater.
PO3 AO3.1 The development proposes an on-site bio-basin to
Development reduces stormwater run-off by Development incorporates water sensitive urban treat collected surface and roof water prior to
minimising impervious areas and design measures to manage stormwater. discharge to the lawful points. The bio-basin
maximising site vegetation to absorb water adopts the use of a landscaped planting bed
on site. AO3.2 which will assist in capturing debris and sediments
Development incorporates porous pavements on from the stormwater. All pavement areas are
low trafficked areas such as footpaths and car designed to direct water to inlets within the
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original (RFI - Sustainable Design Code.pdf)
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.