Original source · versioned page text
Appendix C - Stormwater Management Plan
The original of this document is very large (31.5 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn3.2.2 Non-hinged pit grates
To remove a non-hinged pit grate:
1 Place lifting hooks beneath grate, where possible in the
four corners of the grate (see Photo 6). Concrete lids
may have Gatic lifting points, a key arrangement or holes
in the lid, which may require special equipment such as
Gatic lifters
2 Position each person either side of the grate
(see Photo 7)
3 Lift the grate, ensuring that good heavy lifting posture is
used at all times
4 Place the grate on an angle on the gutter, to allow for the
lifting hooks to be removed (see Photo 8)
Photo 6 Insert hook near edge of grate
5 For extremely heavy one-piece grates and concrete Gatic
covers, insert the lifters in place and slide the lids back.
Note some lids may still require two people
Photo 7 Position each lifter either side of the grate Photo 8 Lift grate and move grate to one side
Photo 9 Lift grate above the support frame Photo 10 Reinstated non hinged grate
10 Stormwater360 Operations and Maintenance
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalVery large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.