Development Application for permit to damage vegetation - OPW13/0122

to the application.


Applications for building work (including extensions and assessable demolition)

Floor plans drawn to an appropriate scale (1:50, 1 :100 or 1 :200 are                   D Confirmed
recommended scales) which show the following:
                                                                                        ~tapplicable
.   the north point
.   the intended use of each area on the floor plan (for commercial, industrial
    or mixed use    developments only)
.   the room layout (for residential development only) with all rooms clearly
    labelled
.   the existing and the proposed built form (for extensions only)
.   the gross floor area of each proposed floor area.

Elevations drawn to an appropriate scale (1:100,1:200 or 1:500 are                      D Confirmed
recommended scales) which show plans of all building elevations and
facades, clearly labelled to identify orientation (e.g. north elevation).
                                                                                        ~tapplicable
Plans showing the size, location, proposed site cover, proposed maximum
number of storeys, and proposed maximum height above natural ground level
of the proposed new building work.
                                                                                        ~firmed
                                                                                             Not applicable


Plans showing the extent of any assessable demolition.

                                                                                        ~nfirmed
                                                                                         .

                                                                                             Not applicable

Applications for operational work involving earthworks (filling and excavating)

drawings showing:
.
    existing and proposed contours                                                      ~firmed
                                                                                              ot applicable
.areas      to be cut and filled
.   the location and level of any permanent survey marks or reference
    stations used as datum for the works
.   the location of any proposed retaining walls on the relevant land and their
    height
.   the defined flood level (if applicable)
.   the defined fill level (if applicable).

Applications for operational work involving roadworks

Drawings showing:
.
    existing and proposed contours                                                      BZirmed
                                                                                              ot applicable
.   the centreline or construction line showing chainages, bearings, offsets if
    the construction line is not the centreline of the road and all intersection
    points
.   information for each curve including tangent point chainages and offsets,
                 length, tangent length, superelevation (if applicable) and
    curve radii, arc

       widening (if applicable)
    curve

.kerb lines including kerb radii (where not parallel to centreline) and
 tangent point changes (where not parallel to centreline)
.
    edge of pavement where kerb is not constructed
.
    position and extent of channelisation
.   location and details of all traffic signs, guideposts, guardrail and other
    street furniture
.
    pavement markings including details on raised pavement markers
.   catch pit, manhole and pipeline locations
.
    drainage details (if applicable)
.cross       road drainage culverts (if applicable)
.   concrete footpaths and cycle paths
.   location and details for access points, ramps and invert crossings


3                                                     IDAS form 6-Building or operational work assessable against a planning scheme
                                                                                                     Version 2.0 17 December 2012