Original source · versioned page text
Appendix F - Landscape plans
Plans and drawings: the text below has words only, no drawings.
DATE PLOTTED: 23 July 2019 8:31 AM BY : SAMUEL VANKAN
NOOSAVILLE BOAT SHED
FOR OPERATIONAL WORKS
TREE SET OUT NOTES
SEEK CLARIFICATION FROM LANDSCAPE ARCHITECT IF PROPOSED LOCATION
CONFLICTS WITH THE BELOW DIMENSIONS. LEGEND
NOOSA RIVER THE LANDSCAPE CONTRACTOR IS TO ENSURE THAT THE FOLLOWING NSC TURF
STREET TREE DESIGN CRITERIA IS FOLLOWED:
MINIMUM HORIZONTAL DISTANCES FROM MATURE TREE CANOPY/DRIP LINE: TU Refer to Detail - 01/200
· 2 METRES TO A POWER POLE.
MASS FEATURE PLANTING
· 3 METRES TO A STREET LIGHT (REFER RELEVANT SERVICE PROVIDER Refer to Detail - 02/200
N
SE
SE
FOR MANAGEMENT AND MAINTENANCE STANDARDS). Refer to Plant Schedule
SE
SE
SE
01
xxx
xxx XXX
XXX
XXX
10.000TEXT10TEXTxxx
10
10
XXX
10
01
xxx
XXX
10
xxx
XXX
SPLAT DIMENSION STYLE @ 1:5
10
xxx
XXX
10
xxx
XXX
10
xxx
XXX 1:100
1:200
1:250
1:500
1:1000
1:50
1:25
1:20
1:10 TEXT
TEXT
TEXT
TEXT
TEXT
XXX
TEXT
XXX
TEXT
XXX
XXXXXXXXX
XXX
MINIMIM HORIZONTAL DISTANCES FROM TREE TRUNK:
MRP
PROPOSED TREE
· 3 METRES TO A 110kV CONCRETE POLE. Refer to Details - 03/200
· 1 METRE TO ENERGEX UNDERGROUND CABLES (INCLUDES VERTICAL
DISTANCE OF 1M).
GARDEN GROVE · 2 METRES TO A FIRE HYDRANT, VALVE BOX OR TELSTRA INSPECTION PIT. RETAINED TREE
· 1.5 METRES TO A HOUSE SEWER OR WATER MAIN CONNECTION.
MAPLE DRIVE
RUSSELL STREET
RUSSELL STREET
GREVILIA DRIVE
· 2 METRES TO A DIRECTLY BURIED FIBRE OPTIC CABLE.
SPADED EDGE
· 2 METRES EITHER SIDE OF A DRIVEWAY. SE
Refer to Detail - 04/200
· 15 METRES FROM THE APPROACH SIDE OF A PEDESTRIAN CROSSING
AND 5 METRES ON THE DEPARTURE SIDE.
CONCRETE PATH
· 20 METRES FROM THE APPROACH SIDE OF A BUS STOP AND 5 METRES
ON THE DEPARTURE SIDE. (By others)
· 15 METRES FROM THE CENTRE OF AN INTERSECTION ON A LOCAL,
COLLECTOR OR TRUNK COLLECTOR ROAD WITH APPROPRIATE EXTENT OF WORKS
CONSIDERATION OF INTERSECTION SIGHT LINES.
SCHEDULE
01 LOCATION PLAN
100 NTS LA181001 - 100 COVERSHEET
LA181001 - 101 SAFETY IN DESIGN SCHEDULE
LA181001 - 102 SPECIFICATION AND NOTES
LA181001 - 110 LANDSCAPE PLAN
LA181001 - 110
NOOSA RIVER LA181001 - 200 LANDSCAPE DETAILS
SE
SE
SE
SE
SE
NEW BOAT
SHED
CAD File: I:\2018 Jobs\10 Noosaville Boatshed VIA (BNE job)\Drawings\Current Drawings\LA181001_100-110.dwg
XREF's: LA181001_landscape base; LA_2001; AC_LA181001Landscape concept plan base
02 SHEET LAYOUT - STREETSCAPE PLANS
100 NTS
Drawn Date Client
SV 28/02/2019 DEPARTMENT OF HOUSING AND PUBLIC WORKS
© Cardno Limited All Rights Reserved. ® Checked Date Project Status
NOOSAVILLE BOAT SHED
This document is produced by Cardno Limited solely for the
TM
Designed
28/02/2019
Date
PRELIMINARY
benefit of and use by the client in accordance with the NOT TO BE USED FOR CONSTRUCTION PURPOSES
H
TM 28/02/2019
T
OR
terms of the retainer. Cardno Limited does not and shall not Scale Size
Verified Date
N
assume any responsibility or liability whatsoever to any third Cardno (Qld) Pty Ltd | ABN 57 051 074 992
Level 11, 515 St Paul’s Terrace
NC Title
COVERSHEET AND PLANTING SCHEDULE NTS A1
party arising out of any use or reliance by third party on the Approved
Fortitude Valley, QLD 4006 Drawing Number Revision
content of this document.
A 22/07/2019 FOR OPW APPROVAL TM NC NC Tel: 07 3369 9822 Fax: 07 3369 9722
Rev. Date Description Des. Verif. Appd. Web: www.cardno.com.au NC
LA181001 - 100 A
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take up to a minute.
Full text of the other 4 pages
Page 2
DATE PLOTTED: 22 July 2019 3:33 PM BY : SAMUEL VANKAN
CAD File: \\Aubnecfs06\splattst$\splat\2018 Jobs\10 Noosaville Boatshed VIA (BNE job)\Drawings\Current Drawings\LA181001_100-110.dwg
XREF's: LA181001_landscape base; LA_2001; AC_LA181001Landscape concept plan base
Drawn Date Client
SV 28/02/2019 DEPARTMENT OF HOUSING AND PUBLIC WORKS
© Cardno Limited All Rights Reserved. ® Checked Date Project Status
NOOSAVILLE BOAT SHED
This document is produced by Cardno Limited solely for the
TM
Designed
28/02/2019
Date
PRELIMINARY
benefit of and use by the client in accordance with the
TM 28/02/2019 NOT TO BE USED FOR CONSTRUCTION PURPOSES
terms of the retainer. Cardno Limited does not and shall not Scale Size
Verified Date
assume any responsibility or liability whatsoever to any third Cardno (Qld) Pty Ltd | ABN 57 051 074 992
Level 11, 515 St Paul’s Terrace
NC Title
SAFETY IN DESIGN SCHEDULE NTS A1
party arising out of any use or reliance by third party on the Approved
Fortitude Valley, QLD 4006 Drawing Number Revision
content of this document.
A 22/07/2019 FOR OPW APPROVAL TM NC NC Tel: 07 3369 9822 Fax: 07 3369 9722
Rev. Date Description Des. Verif. Appd. Web: www.cardno.com.au NC
LA181001 - 101 A
Page 3
DATE PLOTTED: 23 July 2019 8:37 AM BY : SAMUEL VANKAN
SPECIFICATION
1.1 SOFTWORKS 1.2.3 Topsoil Depths and Application 1.5 PLANTING
Spread topsoil to the following consolidated typical depths: (refer to drawings for specific 1.5.1 Plant Material Quality Specification - Nursery Stock
Planting beds details)
Excavated: Trim excavation to bring the subsoil to soil depths specified below finished design Figure 1-3 All plants shall be true to scheduled nomenclature, well formed, hardened off and
levels. Shape the subsoil to fall to subsoil drains where applicable. Break up the subsoil to a disease free nursery stock. They shall be container grown in potting soil with root system
1.3 FERTILISER firmly established but with no large roots growing out of the container. No plant shall be pot
further depth of 100 mm. bound.
Cultivation Provide proprietary fertilisers, delivered to the site in sealed bags marked to show
Cultivation depths (mm): manufacturer or vendor, weight, fertiliser type, N:P:K ratio, recommended uses and
· Turfed and seeded areas in natural ground: min.100mm application rates. Store in a dry secure environment. Apply according to manufacturer's All trees supplied shall comply with AS 2303's “Criteria For Tree Stock Assessment”
recommendations (rate/reapplication/watering).
· Planting areas in natural ground: min. 200mm
The condition of plant stock shall be such that future growth shall be strong and typical of the
species. Stock that shows signs of latent conditions evident of defective nursery practices
Services and roots: Do not disturb services or existing required plant stock roots; if necessary 1.4 TURFING (such as 'spiralling') shall be deemed unacceptable.
cultivate these areas by hand. 1.4.1 Supply
Cultivation: Thoroughly mix in materials required to be incorporated into the subsoil. Obtain turf from a specialist grower of cultivated turf. The Landscape Contractor shall allow for an independent Horticultural certification of all
Cultivate manually within 300 mm of paths or structures. Prevent disturbance to footings of · Areas designated as “Turf” on drawings shall be freshly cut and of the following specification: stock prior to delivery to site that confirms the stock complies with AS 2303:2015 Tree
buildings and landscape retaining walls. Remove stones exceeding 25 mm, clods of earth Stock for Landscape Use.
exceeding 50 mm, and weeds, rubbish or other deleterious material brought to the surface
during cultivation. Trim the surface to design levels after cultivation. Particular attention · Turf to be free from nutgrass or other noxious weeds or any other material deleterious to The certification shall confirm the following:
needs to be made with cultivating and removing of road base with car park planters. Grade plant growth. · stock is disease free and healthy;
sub-grade to sub-soil drains. · Deliver the turf within 24 hours of cutting, and lay it within 36 hours of cutting. Prevent it from · rootball has adequately grown into the container appropriate to the specified size;
Additives · Stock shows no evidence of spirally, being pot bound, or other undesired outcomes of growth
drying out between cutting and laying.
General: Apply additives after ripping or cultivation and incorporate into the upper 100 mm
at the nursery.
layer of the subsoil. 1.4.2 Fertilising
Gypsum: Incorporate *Natural Gypsum at the rate of 2t/Ha and lightly manually water into Primary
subsoil sufficient to begin chemical reaction. Before turfing, apply fertiliser of 14:15:10 N.P.K. or approved similar composition at the rate 1.6 MULCHING
of 100g per m2 and rake into the prepared soil. Mulch
1.2 TOPSOIL General: Provide mulch which is free of deleterious and extraneous matter such as soil,
1.2.1 Planting Areas Secondary weeds and sticks.
General: Imported Premium Grade topsoil for all new planting areas shall be: In the last week of the Establishment Period and after mowing, apply Ammonium Sulphate Standard: To AS 4454.
· “Premium Organic Garden Soil” by Centenary Landscapes or similar approved equivalent to fertiliser (20:0:0) NPK at the rate of 12g per m2 or other approved fertiliser at an equivalent 1.6.1 Organic Mulch Types
comply with AS 4419 (1998).
rate of nitrogen. Prepare as a solution not stronger than 25g of fertiliser per litre of water and
apply evenly to the turfed area. Lightly water after application. · Organic Mulch: Hoop Pine mulch
Up to date pH testing and compliance with this standard is required prior to installation. 1.4.3 Laying Material not permitted: Leaf and plant matter from any other species (especially weed
Furnish Superintendent with written test for approval. species such as privet, camphor laurel, coral tree, poplar, willow, pine and other noxious
General: Lay the turf in the following manner:
1.2.2 Placement weeds).
· In stretcher pattern with the joints staggered and close butted.
General: Spread the topsoil on the prepared subsoil and grade evenly, making the necessary 1.6.2 Placing Mulch
allowances to permit the following: · Parallel with the long sides of level areas, and with contours on slopes.
General: Place mulch to the required depth, clear of plant stems. Spread mulch so that after
· Required finished levels and contours may be achieved after light compaction. · To finish flush, after tamping, with adjacent finished surfaces of ground, paving edging, or settling it is smooth and evenly graded between design surface levels sloped towards the
· Grassed areas may be finished flush with adjacent hard surfaces such as kerbs, paths and grass seeded areas. base of plant stems in plantation beds, and not closer to the stem than 50 mm in the case of
· Strip turf laying: Close butt the end joints and space the strips 300 mm apart. Apply a layer of gravel mulches.
mowing strips.
top dressing between the strips of turf. Finish with an even surface. Extent: To surrounds of plants planted in riplines and grass areas, provide mulch to 1000 mm
Contamination: Where diesel oil, cement or other phytotoxic material has been spilt on the diameter. Mulch areas to Ex-ground trees to be 1800 diameter.
subsoil or topsoil, excavate the contaminated soil, dispose of it off the site, and replace it 1.4.4 Tamping Spread mulch to the following depths:
with imported topsoil to restore design levels. Lightly tamp to an even surface immediately after laying.
Spreading: On steep batters, if using a chain drag, ensure there is no danger of batter
1.4.5 Pegging
disturbance.
Finishing: Feather edges into adjoining undisturbed ground or against adjoining surfaces. On steep slopes peg the turf to prevent down-slope movement. Remove the pegs when the
turf is established.
1.2.1 Soil Gradients
1.4.6 Watering
Unless otherwise stated on the drawings, the following maximum gradients shall be adhered: Water immediately after laying until the topsoil is moistened to its full depth. Continue
· Mulched Garden Beds 1:3 watering to maintain moisture to this depth. Keep the grass in a healthy weed free condition.
Refer section 12.10.3 for watering regime.
CAD File: I:\2018 Jobs\10 Noosaville Boatshed VIA (BNE job)\Drawings\Current Drawings\LA181001_100-110.dwg
· Grassed Areas 1:4
1.2.2 Consolidation 1.4.7 Mowing
Compact lightly and uniformly in 150 mm layers. Avoid differential subsidence and excess Mow to maintain the grass height within the required range. Do not remove more than one
compaction and produce a finished topsoil surface that has the following characteristics: third of the grass height at any one time. Carry out the last mowing within 7 days before the
XREF's: LA181001_landscape base; LA_2001; AC_LA181001Landscape concept plan base
· Finished to design levels.
end of the planting establishment period. Remove grass clippings from the site after each
mowing.
· Smooth and free from stones or lumps of soil. 1.4.8 Top Dressing
· Graded to drain freely, without ponding, to catchment points. When the turf is established, mow closely, remove cuttings and lightly top dress to a depth of
· Graded evenly into adjoining ground surfaces. 10mm with an approved top dress soil. Work the dressing well into the joints and correct any
· Ready for planting.
unevenness in the turf surface.
Drawn Date Client
SV 28/02/2019 DEPARTMENT OF HOUSING AND PUBLIC WORKS
© Cardno Limited All Rights Reserved. ® Checked Date Project Status
NOOSAVILLE BOAT SHED
This document is produced by Cardno Limited solely for the
TM
Designed
28/02/2019
Date
PRELIMINARY
benefit of and use by the client in accordance with the
TM 28/02/2019 NOT TO BE USED FOR CONSTRUCTION PURPOSES
terms of the retainer. Cardno Limited does not and shall not Scale Size
Verified Date
assume any responsibility or liability whatsoever to any third Cardno (Qld) Pty Ltd | ABN 57 051 074 992
Level 11, 515 St Paul’s Terrace
NC Title
SAFETY IN DESIGN SCHEDULE NTS A1
party arising out of any use or reliance by third party on the Approved
Fortitude Valley, QLD 4006 Drawing Number Revision
content of this document.
A 22/07/2019 FOR OPW APPROVAL TM NC NC Tel: 07 3369 9822 Fax: 07 3369 9722
Rev. Date Description Des. Verif. Appd. Web: www.cardno.com.au NC
LA181001 - 102 A
Page 4
DATE PLOTTED: 23 July 2019 8:30 AM BY : SAMUEL VANKAN
BOAT RAMP
SE
1 BAN int
SE
TURF 01
200
EXTG B&FP
SE
11 MEL aff OFFICE BUILDING
11 TRI lau
SPADED EDGE 04
SE
200
1 BAN int
SE
NEW BOAT SHED
TURF AREA
20 TRI lau
20 MEL aff
REMOVE LOPPED TREE
RETAINED EXISTING PALM
STANDS
TREE PLANTING 03
200
RUSSELL STREET
CAR PARK CHAIN WIRE FENCE 05
200
15 TRI lau
PLANTING 02
200
1 BAN int
3 CUP ana
24 MEL aff
CAD File: I:\2018 Jobs\10 Noosaville Boatshed VIA (BNE job)\Drawings\Current Drawings\LA181001_100-110.dwg
TREES TO BE
RETAINED
XREF's: LA181001_landscape base; LA_2001; AC_LA181001Landscape concept plan base
Drawn Date Client
SV 28/02/2019 DEPARTMENT OF HOUSING AND PUBLIC WORKS
© Cardno Limited All Rights Reserved. ® Checked Date Project Status
NOOSAVILLE BOAT SHED
0 1 2 4 6 8 10m This document is produced by Cardno Limited solely for the
TM
Designed
28/02/2019
Date
PRELIMINARY
H
benefit of and use by the client in accordance with the NOT TO BE USED FOR CONSTRUCTION PURPOSES
T
TM 28/02/2019
OR
SCALE 1:100 @A1 terms of the retainer. Cardno Limited does not and shall not Scale Size
Verified Date
N
assume any responsibility or liability whatsoever to any third Cardno (Qld) Pty Ltd | ABN 57 051 074 992
Level 11, 515 St Paul’s Terrace
NC Title
LANDSCAPE PLAN 1:100 A1
party arising out of any use or reliance by third party on the Approved
Fortitude Valley, QLD 4006 Drawing Number Revision
content of this document.
A 22/07/2019 FOR OPW APPROVAL TM NC NC Tel: 07 3369 9822 Fax: 07 3369 9722
Rev. Date Description Des. Verif. Appd. Web: www.cardno.com.au NC
LA181001 - 110 A
Page 5
DATE PLOTTED: 22 July 2019 3:19 PM BY : SAMUEL VANKAN
FOR SIZE SPECIFICATIONS
REFER PLANT SCHEDULE
100mm MULCH AS SPECIFIED REFER TO LANDSCAPE PLAN HESSIAN OR ELASTIC TIES POSITIONED
FOR SPECIES AND POT SIZES MOUND SOIL TO 100mm HIGH TO AT 13 HEIGHT OF TREE. ONE TIE IN A
CREATE WATER HOLDING BASIN FIGURE 8.
TURF AS PER SPECIFIED 200mm IMPORTED TOPSOIL SITE TOPSOIL WITH OVER ROOTBALL - Reduce height of ties progressively to 61
100mm IMPORTED TOPSOIL WATER CRYSTALS AND height of tree during establishment period.
FERTILISER AS SPECIFIED - Remove stakes and ties at the end of
100mm CULTIVATED EXISTING SUBGRADE 100mm CULTIVATED EXISTING
SUBGRADE establishment period.
- Refer to specification
2 No. 50/50 HARDWOOD STAKES.
100
SPADECUT EDGE AS PER 2 X 10g SLOW RELEASE
DETAIL 02/203 FERTILIZER TABLETS
100
1m Ø MULCH RING TO 100mm DEPTH
200
100mm RIPPED SUBGRADE.
EXISTING SUBGRADE TURF AS PER PLAN AND
SPECIFIED. REFER DETAIL 01/200
100
EXCAVATE HOLE 600mm WIDER AND
EXISTING SUBGRADE 300mm DEEPER THAN POT SPECIFIED.
ROOT BALL
BACKFILL HOLE WITH SITE TOPSOIL WITH
FERTILISER AS SPECIFIED. LIGHTLY
COMPACT SOIL UNDER ROOTBALL TO
PREVENT EXCESSIVE SETTLING.
EXISTING SUBGRADE
LD01 TYPICAL TURF LD02 TYPICAL PLANTING 150mm RIPPED SUBGRADE AT
BASE OF HOLE
200 1:10 200 1:10
LD03 TREE IN GARDEN BED
200 1:20
NOTE:
1. REFER TO PLAN, DETAILS AND SPECIFICATION FOR
ADJOINING MATERIAL INFORMATION FIRE BREAK
BOUNDARY
TREATMENT
PRIVATE VARIES
SPADE CUT EDGE LOT
- Leading edge of mulch to 2400 MAX
POWDER-COATED - BLACK 45mm CHS
be flush with adjoining INSTALL DOUBLE TWISTED WIRE REFER TO SPECIFICATION FOR DETAILS
material ACROSS END OF CHAIN WIRE SECTION
250 TYP TO IMPROVE STABILITY OF CHAIN WIRE
600
100
VARIES
IMPORTED TOPSOIL
1200
100
CULTIVATION BLACK POWDER COATED CHAIN
500
MESH ON POST. 50mm X 2.8mm
EXISTING SUBGRADE
100
G.L. G.L.
100
100
150
LD04 SPADED EDGE
CAD File: \\Aubnecfs06\splattst$\splat\2018 Jobs\10 Noosaville Boatshed VIA (BNE job)\Drawings\Current Drawings\LA181001_200.dwg
COMPACTED 20mm DRAINAGE FOOTINGS TO BE CERTIFIED BY
200 1:10 GRAVEL TO THE BASE OF THE ENGINEER
POST. MIN DEPTH OF 150mm
LD05 TYPICAL DETAIL - CHAIN WIRE FENCE
200 1:20
XREF's: LA181001_landscape details base
Drawn Date Client
SV 28/02/2019 DEPARTMENT OF HOUSING AND PUBLIC WORKS
0 0.2 0.4 0.6 0.8 1m © Cardno Limited All Rights Reserved. ® Checked Date Project Status
NOOSAVILLE BOAT SHED
This document is produced by Cardno Limited solely for the
TM
Designed
28/02/2019
Date
PRELIMINARY
SCALE 1:10 @A1 benefit of and use by the client in accordance with the NOT TO BE USED FOR CONSTRUCTION PURPOSES
TM 28/02/2019
terms of the retainer. Cardno Limited does not and shall not Scale Size
Verified Date
0 0.5 1 1.5 2m assume any responsibility or liability whatsoever to any third Cardno (Qld) Pty Ltd | ABN 57 051 074 992
Level 11, 515 St Paul’s Terrace
NC Title
LANDSCAPE DETAILS NTS A1
party arising out of any use or reliance by third party on the Approved
Fortitude Valley, QLD 4006 Drawing Number Revision
SCALE 1:20 @A1 content of this document.
A 22/07/2019 FOR OPW APPROVAL TM NC NC Tel: 07 3369 9822 Fax: 07 3369 9722
Rev. Date Description Des. Verif. Appd. Web: www.cardno.com.au NC
LA181001 - 200 A