Development Application part 7 of 10 Stormwater Management Report - MCU13/0092

3.2.2    Non-Hinged Pit Grates

To remove a non-hinged pit grate:
    1.   Place lifting hooks beneath grate, where possible in the four corners of the grate (Plate 6). Concrete
         lids may have Gatic lifting points, a key arrangement or holes in the lid, as such special equipment,
         such as Gatic lifters may be required.
   2.    Position each person either side of the grate. (Plate 7)
   3.    Lift the grate, ensuring that good heavy lifting posture is used at all times.
   4.    Place the grate on an angle on the gutter, to allow for the lifting hooks to be removed. (Plate 8)
   5.    For extremely heavy one piece grates and concrete Gatic covers, insert the lifters in place and slide the
         lids back. Note some lids      still require two      Ie. Picture re   uired)
                                                       ’"."




Plate 6 Insert hook near edge of grate            Plate 7 Position each lifter either side of the

                                                  grate




Plate 8 lift grate and move grate to one side      Plate 9 lift grate above the support frame




Plate 10 Reinstated non hinged grate




@2011 Stormwater360